|
|
|
Designed for portable and machine drilling in a broad range of steel, ferrous and non-ferrous materials (bright finish in non-ferrous), under many different conditions. TiN coating with increased surface hardness allows for extended tool life, greater lubricity, better chip ejection, increased productivity, and lower horsepower requirements.
|
|
|
DIXI Polytool’s standard families of drills are dedicated for various applications. The ranges of Ø start at 0.10mm.
|
|
C019V3005 19Pc HSS roll-Forged drill bit kit - metal case (ECO box)
C019V3005-2 19Pc HSS roll-Forged drill bit kit - metal case (PRO box)
C025V3075 25Pc Tecn'x Cobalt 5% drill bit kit - metal case
C025V3085 25Pc Tecn'x HSS M2 drill bit kit - metal case
|
|
|
SGS Solid Carbide Drills feature special geometry and other enhancements that provide greater hole dimensional accuracy at higher production rates. Available with SGS Ti-NAMITE Tool Coatings, including Ti-NAMITE (TiN), Ti-NAMITE-A (AlTiN), and Ti-NAMITE-C (TiCN), to dramatically increase tool life.
|
|
BENEFITS:
- 2xØ and 3xØ for all sizes
- Large, reinforced helical flutes.
- Through tool coolant
- KAB6 connection for drilling all diameters up to 2 1/2" on 40 or 50 taper machining centers.
- Standard WCMX carbide inserts
- Coolant inducers and adjustable holders standard.
|
|
|
These compacts are also used to prevent rubbing wear on steel surfaces and where it is more economical to drill less precision holes.
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
Holeshot® OTM™ Tools
Maximize your productivity and lower your cost per cut with OTM™ quality and variety.
- Grades
- Holeshot® Drills
- Coremaster® Coredrills
- WCMX & WCGT Inserts
- Stinger™ Drills
- Counterbores
- Countersinks
- TCMT Inserts
- End Mills
- Chamfer Mills
- Face Mills
- XPMT Inserts
- Aluminum Cutting Mills
- APET Inserts
|
|
Quad-Drill line now includes 9 standard sizes, all larger than 2 inches
Up to 30% more productivity than the drills they replaced
All sizes have 4 insert stations
Currently offered in 2:1 length-to-diameter ratios
3:1 lengths coming soon
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
|
|
|
|
feedMAX - Solid Carbide Drills
Highest productivity with Seco solid carbide drill. Due to the new superior quality drill Seco can help you improve your productivity by as much as 100%. Saving money and time. feedMAX offering drills in diameter range 3-20 mm. The self-centring geometry gives quality holes without pre- or finishing operations necessary. The low friction TiAlN coating secures good performance in a wide range of materials as well as an exceptional tool life. The high productivity together with the long tool life gives excellent total machining economy when using feedMAX solid Carbide drill.
Brazed Carbide Tipped Drills
Brazed carbide tipped drills in diameters 9,85-32,10 mm for drilling quality holes without any finishing operations. Self centring geometry with a TiN coated P25 micro grain carbide gives good chip control and tool life in most workpiece materials.
Coolant through the drills for safe chip evacuation.
Seco CrownLoc
Drill precision holes at low cost in the hole diameter range from 12 to 25,99 mm with Seco CrownLoc. The exchangable crowns cut all your regrinding costs. With every change of crown, a new one guarantees long and predictable tool life. Exchangable crowns also allow for high cutting speeds reducing machining cost. Optimised geometries for different workpiece materials; steel, stainless steel and cast iron, complete the advantages with the CrownLoc system.
Perfomax Indexable Drills
The Perfomax range of indexable drills, in diameters 15-80 mm, is based on long experience and the very latest technological advances in drilling. Strong square inserts for good machining economy, a rigid drill body and good chip flow enable the drills to handle high metal removal rates. The drills can be used both in rotating and non-rotating applications. A unique chip path configuration reduces noise and vibration. Drilling depths from 2 x D to 5 x D.
|
|
The all-surface tool for plunging, drilling, grooving and more.
- Multi-Function Cutter: Center cutting capability allows drilling of holes as well as other operations such as channeling, contouring, shouldering and ramping.
- 2 Identical Inserts - 2 Effective Teeth: Cutter designed with two identical trapezoidal inserts, allowing for two effective cutting edges when plunging and endmilling.
- Great Strength: Insert geometry designed for applications in high strength tool steels. Our VP5020 grade (PVD coated micrograin carbide) is highly resistant to wear and thermal shock.
- No Interference with the Part Being Machined: The cutting diameters of the cutters are intentionally made larger than the shank diameters.
- Greater Rigidity with Large Overhangs: Plunging, a milling operation along the Z-axis only, minimizes the flexing of the cutters and allows a greater overhang than can be realized with conventional milling in the X and Y axis.
|
|
"SLICK" Twist Drills for composite materials and Titanium
HTT patented “Slick” Drills are micrograin solid carbide twist drills designed for Drilling – Reaming – Countersinking in one operation (“One Up”) composite materials (AL/AL - AL/Ti - CFRP/AL - CFRP/Ti - Ti/CFRP - CFRP - Ti/Inconel). “One Up” operations offer the following benefits:
Reduction of the quantity of tools and production phases
Costs reduction
Operation Time reduction
Improvement of surface finish quality
“Slick” Twist Drills are of three fundamental types:
- For CNC machines
- For semi automatic machines (PV Tools, pneumatic tools with constant feed per revolution)
- Hand operated twist drills (with a pre-hole that enables you to obtain a finished ½” bore in one operation instead of using 8 different drills and bore processes)
|
|
The new generation of the extra large solid carbide drills up to 40 x D.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
Deep Drilling
Operation with 1700 cycles granted.
These HTT gun drills are specifically designed for sferoidal cast iron and can be supplied with or without coolant holes. Surface coatings: PVD or CVD.
Range of diameters: 6-20 mm
|
|
Fine Boring System
Kennametal offers Modbore and Romicron® - two world-class boring systems for your fine to rough boring requirements. Perform rough boring and precision boring operations with Modbore. Meet ultra precision requirements with Romicron®.
Romicron
For your precision boring operations.
Modbore
Twin cutting heads allow increased feed rates.
|
|
The use of the highly wear and oxidation resistant Miracle Coating achieves long tool life at extreme feed rates or during high temperature conditions experienced during deep drilling operations.
This range of drills achieves state of the art performance and hole precision even under the toughest cutting conditions.
Ask our experts more. MPS drills on demonstration every day at EMO, Mitsubishi Materials, Hall 5, Stand D20.
Available from Ø3.0 – Ø20 l/d x 3, and up to l/d 30 for diameters up to 10mm.
|
|
|
|
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
Sandvik Coromant now introduces CoroBore 820, a unique addition to its boring tool programme.
CoroBore 820 is a new solution for high productive boring preferably in roughing operations. The boring range is 35 - 260 mm and the boring depth is up to 4 x diameter. It is designed for internal coolant supply.
Three cutting edges allow a higher penetration rate with maintained tool life. A comprehensive programme of tool bodies, slides, shims and cutting inserts allow CoroBore 820 to be configured to suit the widest possible range of applications.
CoroBore 820 in combination with Duobore makes a highly productive team for rough boring from Sandvik Coromant.
|
|
BoreSTAR out-performs any other kit when it comes to range, rigidity, accuracy and repeatability.
The BoreSTART kit is fast and simple to use (no spacers or complicated set-ups) but is extremely rigid and accurate. It is dial adjustable in increments of 0.0001". Range is from .314" to 6.69" (8mm to 170mm)
|
|
Drills HSS-E
- Twist Drills HSS / HSS-E
- Taper Pin Twist Drills,
Subland Twist Drills,
Core Drills / Shell Drills
- Centre Drills HSS / HSS-E
HSS / HSS-E
Solid Carbide
|
|
A wide range of metal drill bits:
3000V HSS ground
3005V PRO HSS roll forged
3085V Tecn'x HSS ground splint point
300XV HSS ground splint point
3075V Tecn'x cobalt 5% ground
3060V Tecn'x cobalt 8% ground
3098V cut & gold ground
3001V Tecn'x titanium ground
3065V cobalt 5% tiain HSS ground
3008V "coupe alu "M2 HSS metal
3020V Tecn'x M2 stub-lenght ground
3120V double-ended HSS ground
3010V tecn'x M2 long length ground
3016-17-18V tecn'x M2 extra long-length ground
3030V HSS morse taper-shank ground
3031V cobalt 5% HSS morse taper-shank
3777V solid carbide
3009V carbide ground
3011V 90° step
3012V 120° step
3039V M2 HSS milling
3101V cobalt 5% ground spot weld
3071V M2 HSS ground spot weld
3050V 60° HSS center
Metal box : 7-10-12-19-25-32-81 drills bits
|
|
The new Posidrill Plus™ system offers excellent performance in short-hole drilling. The body and insert combination offer an unbeatable combination for 2x (all drills above 2.500” Ø) or 3x diameter short-hole drilling. The Posidrill Plus™ replaces the Posidrill II™.
- A unique pocket design preventing slugs as the drill
exits the component. This allows stacked plates and
welded assemblies to be drilled.
- Multiple inserts in each flute for larger drills break the
cut into smaller sections. This reduces the power
consumption, creates more manageable chips and
allows for excellent chip evacuation.
- Use in static and rotating applications.
- Able to bore up to 10% hole diameter
- Excellent performance in stainless steels
|
|
- Metric and inch diameters offer a wider diameter range.
- Special surface treatment of drill-body design improves rigidity and resistance to erosion due to chip extraction, and provides longer tool life.
- Coated drill body prevents corrosion and extends tool life.
- Helical flute is designed for excellent chip extraction, especially in deep drilling. Provides better hole finish and extends tool life.
- Two flow-through coolant holes provide stability and enhance chip removal.
|
|
The Unidrill® product range is a replaceable insert system with the capability of drilling several diameters with one body. Both HSS and carbide inserts are available for drilling all materials.
Geometry CR Grade SP9336
(T15 High Speed Steel with TiAlN PVD coating)
For machining steels, cast irons (including nodular) and non-ferrous materials. This geometry has cross ground point, radial land, chip splitters and a corner protection radius.
Diameter range 10mm - 25mm / 0.390" – 1.000"
|
|
|
Find the toolholder that's right for your application. Available in most ANSI sizes, Tungaloy holders are manufactured to the highest quality standards. Check out our A-Type holders for strong clamping power and fast, accurate indexes
|
|
Indexable Drilling
Kennametal offers the most complete range of indexable drills, ranging from the DFR 12,7mm (.500") to the HTS deep hole drilling system of 270mm (10.63"). Coupled with Kennametal grade technology, the indexable drills offer security, durability, and aggressive cutting speeds.
Drill Fix DFR
High feed rates, better stability, and process safety.
Drill Fix DFT
Most complete range of indexable drills in the metalworking industry.
HTS Deep Hole Drilling System
Flexible indexable deep hole drilling system.
|
|
- Economical, 4 cutting edges per insert.
- Low drilling noise and tough body.
- New MIRACLE Coated X/P15TF (US breaker) for stable machining and a wider application area.
JUST FIT SLEEVE
Allows the drill diameter to be increased in increments of 0.1mm up to a maximum of 0.5mm.
|
|
|
|
