|
|
|
Ingersoll Rand duplex compressors offer two individual compressor pumps and motors mounted on a single unit, providing 100% built-in backup or additional air power for those larger capacity jobs. The Duplex is ideal in applications where available power does not allow for a single larger compressor.
|
|
Industrial Duty Reciprocating Air Compressors
Quincy reciprocating compressors are specifically engineered to deliver the high pressure you need at an affordable price. Quincy reciprocating compressors produce up to 175 psig and are rated at a 100 percent duty cycle.
- Available with a gasoline engine, diesel engine or electric ODP single or
three-phase electric motor
- Motor overload protection standard on all electric models
- Low oil shutdown
- Air-cooled aftercooler
- Pneumatic tank drain
- Two-piece connecting rods
- Industrial class bearings
- Loadless auto stop/start
- Cast iron crankcase and cylinders
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
COMPRESSOR LM 100-400
With reducing/aftercleaning deviceMotor capacity (HP/kW) 3.0/2.2
Receiver (l) 100
Number of cylinders 3
Number of stages 1
Working pressure (bar) 8
Pressure (max., bar) 10
Intake capacity (l/min) 400
Weight (kg) 80
Dimensions (l x w x h, cm) 108 x 37 x 82
Electric tension (Volt/Hz/Ph) 230/50/1
Ordernr: Code
36538 LM 100-400 B
|
|
The Bare Compressor unit consists of cylinders and cylinder heads, fitted in V configuration on a crankcase. Valve flats are provided in between the cylinders and cylinder heads along with stainless steel finger type valve plates to perform air suction and discharge operations. Disc valves are provided for 15 HP models.
Advantage
* Simple installation in a wide range of positions
* Very limited checks and maintenance.
* Extremely quiet operation due to high precision in machining and assembly.
* Innovative assembly system for easy repairs
|
|
|
The Reciprocating Compressor Division is involved with the design, development and manufacture of single and two stage reciprocating compressors.
|
|
GD Belliss & Morcom Air & Gas Compressors
Bellis & Morcom Air & Gas Reciprocating Compressors
Reciprocating Compressors
Commitment to Air Compressor Excellence
GD Belliss & Morcom reciprocating air compressors have a 30-year
design life. Each reciprocating air compressor is engineered to ensure
decades of operation, no matter where they are installed. Our attention
to detail extends to every component, ensuring quality throughout;
choosing a GD Belliss & Morcom reciprocating air compressor means
buying the assurance of experience and quality.
|
|
Compressor stations
Plug and play straight from the box
High reliability
Extremely long service life
Low noise levels
100 % continuous operation
|
|
LG SERIES (1-3 HP)
The LG series 1-3 HP compressors are designed for continuous duty application. These single-stage single cylinder belt driven reciprocating air compressors are a reliable workhorse and provide an airflow range for 2-7 cfm.
Key features
* Designed for continuous duty
* Deep finned cast iron cylinders
* Aluminium cooler tubes and aerodynamically designed fan for efficient cooling
* Air receiver conforming to ASME design
* Sturdy, robust case iron crankcase
* Forged steel crankshaft
* Optimal operating speed
* Pressure relief valve for extra safety
* Low expansion aluminium alloy piston
|
|
|
International shipping with its most stringent requirements for quality and reliability is Sauer's traditional field of activities. Our starting-air and working-air compressors have proven to be reliable in this demanding market. They count among the most modern and most economic compressors available today. In particular the 3-stage air-cooled starting-air compressors - in comparison to the traditionally used 2-stage water-cooled compressors - contribute significantly to modern ship operation concepts. With these products Sauer became one of the leading manufacturers of compressors for shipping and off-shore technology world-wide.
|
|
The Laby® compressor represents unbeatable reliability and availability, thanks to its unique labyrinth sealing system on piston and piston rod gland that allows oil free and contact-free compression. The result is an extended meantime between overhaul, that has a positive impact on reliability and operating cost.
Neither contamination of the gas by abraded material from piston rings nor hot spots from friction occur. The Laby® is designed to compress bone-dry, dirty, abrasive and other gases. The gastight casing reduces gas emission and losses to the environment to zero. The Laby® compressor easily manages the compression of LNG boil-off gas at suction temperatures down to minus 160°C (minus 250 F).
|
|
|
|
|
|
Sauer Compressors UK offers a wide family of gas compressors:
'H' series compressors are used for Air or Nitrogen compression. Each compressor is an air-cooled, single acting, three or four stage-reciprocating piston compressor with the combination of oil pressure fed crankshaft bearings, and cylinder oil splash with regulated injection for the final high-pressure piston plunger design.
Performance with inert gases, such as Nitrogen, ranges from 10 to 150 Nm^3/h within a final pressure range of 100 to 350 bar including the Sauer unique NitroFlex integrated 'all-in-one' - Compressor, generator and gas booster.
'W' series compressors are oil-lubricated, single acting water-cooled piston compressors for air or inert gas compression in two or three stages from 10 to 100 bar with gas flow-rates from 65 to 400 Nm^3/h.
'LB' series inert gas boosters are dedicated nitrogen gas boosters that can accept suction pressures from 4 to 14 bar to deliver gas to a maximum of 40 bar. This single stage gas booster range is the result of years of trouble-free experience with the 'L' range.
'L' series compressor/boosters offer a wide range of gas flow-rates from 10 to 400 m^3/h at pressures to 40 bar in two or three stages based upon the established marine diesel air-start Sauer range of two and three stage oil-lubricated, piston compressors. Even as air compressors they can be safely adapted for use in Ex-atmospheres to ATEX regulations
|
|
JAB Kompressors are own developments with the knowledge we gained during the construction of our compressors with a performance up to 350 Bar.
The main characteristics of these machines are oil pressure lubrication, oil pressure control, oil pressure monitoring, shut down in case of lack of oil, oil and water separation with automatic discharge and condensate separation as well as very low noise emitting values.
|
|
Advantages of JAB Compressors For Gas Compression
Compressor 4 stages, air cooled
Compression proofed crankcase
Gas proofed shaft packings through axial face seals
Oil pressure lubrication for crank drive and piston of the 3rd and 4th stage
External lubricating oil filter
High efficient cooling system
Maintenance-free oil and water separator
Micro filter at the high pressure gas outlet
Efficient, economic, easy maintenance
|
|
QRNG Single & Two Stage Natural Gas Compressors
Based on the proven performance of the QR-25, an air compressor with over 80 years of reliable service, but engineered exclusively for natural gas applications, the Quincy QRNG™ is constructed of heavy-duty cast iron for strength and durability. The cylinders are cast with horizontal cooling fins and machined to rigid tolerances. The Quincy QRNG features an advanced-design pressure lubrication system, rebuildable connecting rods, and low-lift valves.
|
|
The process gas compressor represents high availability and a long meantime between overhaul thanks to an optimized selection of high quality components and valves that result in low operating and maintenance cost. Burckhardt Compression has over 160 years of experience in manufacturing reciprocating compressors and offers a worldwide one-stop service.
The company provides a robust and reliable process gas compressor of Swiss design and manufacture. It is designed according to individual application requirements within the API 618 specifications. It is available oil-free or lubricated, horizontal or vertical. It handles easily hydrogen, hydrocarbons and corrosive gases at high pressure.
|
|
COMPRESSOR AP 320+ (silent and oilfree)
CE-NORM
With engine safety switch
Specs Motor capacity (HP/kW) 3.0/2.2
Receiver (l) 230/50/1
Number of cylinders 2
Number of stages 1
Working pressure (bar) 9
Pressure (max., bar) 10
Intake capacity (l/min) 320
Weight (kg) 65
Dimensions (l x w x h, cm) 75 x 46 x 95
Electric tension (Volt/Hz/Ph) 87
EAN 13 Barcode 8712418025224
Switch direct
|
|
Industrial Duty Reciprocating Air Compressors
Quincy reciprocating compressors are specifically engineered to deliver the high pressure you need at an affordable price. Quincy reciprocating compressors produce up to 175 psig and are rated at a 100 percent duty cycle.
- Available with a gasoline engine, diesel engine or electric ODP single or
three-phase electric motor
- Motor overload protection standard on all electric models
- Low oil shutdown
- Air-cooled aftercooler
- Pneumatic tank drain
- Two-piece connecting rods
- Industrial class bearings
- Loadless auto stop/start
- Cast iron crankcase and cylinders
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
|
Designed for the professional, our 3 HP and 5 HP single stage compressors are ideal for almost anyone, from individuals that thrive on do – it – yourself projects to the professional air compressor user. When performance is defined by maximum operating pressure, increased air flow and extended duty cycles, Ingersoll Rand is the product of choice. You will get a compressor that features maximum air power, reliable precision engineered components and a durable design that is built to last.
|
|
Elgi is the first and only Indian manufacturer chosen by Indian Railways for indigenization of compressors for GM ( General Motors) Locomotives. The newest compressor developed for Indian railways is the RR66101 W, a two stage W type reciprocating compressor with forced lubrication and water-cooled stages. The compressor has a discharge pressure of 140 psi and a free air delivery rating 190 cfm at 900 rpm.
The complete design and development was done in-house in compliance to DFSS specifications. Three compressor have been validated for 3000 hours of continuous running as a part of the functional qualification test. Further, three compressors have been validated over a period of 50 hours running under the temperature of 80 degree celsius to satisfy the operating environment specifications. The Indian Railways has placed an order worth Rs.30 million for the supply of water-cooled compressors.
|
|
|
|
|
|
Sauer Compressors UK offers water cooled compressors covers up to 350 bar.
With our long tradition of technology and ongoing research and development, our machines are highly mature and the most advanced in this market segment.
When designing our compressors, we concentrate on the essentials - maximum functionality -, because that's what counts, with form following function, using tried and tested, classic mechanical engineering principles for ease of use, with the main maintenance points readily accessible.
Our know-how in the design and construction of water-cooled compressors, gained over 75 years in
supplying dockyards and shipping company’s worldwide, has meant we can offer a series of highly competitive alternatives for use where air-cooled compressors cannot be used. Enjoy the benefits of
robust water-cooled compressors for your application: low noise, no need for cooling air and much less heat release to the environment.
Water-cooled high-pressure compressors have proven themselves in exceptionally tough applications, such as submarines and aircraft carriers. They are the safe choice for all applications in which air-cooled compressors are impractical. For your special requirements, you can depend on the advantages of this high-performance, extremely robust series.
|
|
Used by almost every airline in the world for filling on-board emergency cylinders. Also used by major diving contractors, emergency medical service companies and mine rescue centers.
This model will pump from high or medium pressure sources and will also function effectively to collect and transfer the gas from partially depleted supply cylinders to "Top Off" other cylinders to maximum pressure.
The basic booster is two-stage, rated for continuous duty compression ratios of over 15:1 intermittent to 40:1
|
|
Up to 420 bar
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
|
|
Up to 350 bar
Expert advice on everything you need
We believe that providing our clients with complete, competent support services is all part of the product. We can provide the technical design, professional installation and servicing and maintenance if so required.
We always find out what our clients really need first, analysing their requirements to ensure we offer the correct, complete solution.
|
|
|
|
|
|
Sauer Compressors UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor station. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated filter, demistor and condensate collector tank. The width of less than 800mm width allows it to be conveniently brought through any door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
|
|
|
|
Sauer Compressors UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor station. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated filter, demistor and condensate collector tank. The width of less than 800mm width allows it to be conveniently brought through any door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
High Pressure Air Compressor Units
This section of the homepage will introduce our industrial high pressure compressors for air compression (90 - 500 bar).
|
|
|
|
|
|
PH and PHB piston compressors deliver compressed air at pressures ranging from 15 to 35 bar. The intake pressure for all PH models is atmospheric, while the PHB booster compressors process air with intake pressures ranging from 6 to 10 bar. Both Series share high-performance features and components to ensure maximum reliability.
PH series high-pressure reciprocating compressors, lubricated, air cooled, with measured capacity from 12 to 46 m3/h and delivery pressure from 15 to 35 bar, have been designed to guarantee high performance over time. Every PH model has a dual-stage piston air end, with special steel pipes for inter-cooling the compressed air and improving the overhaul compressor efficiency. PH compressors are equipped with condensate separator and electronic controlled drainer, non-return valve of Hoerbiger type, intake and outlet pressure gauge.
PHB series boosters are lubricated reciprocating compressors with measured capacity from 8 to 150 m3/h, intake air pressurized from 6 to 10 bar and final pressure at 20 or 35 bar. These compressors are compact and silent thanks to the vibration-proof rubber bushings supporting the booster frame, easy to install without foundations or soundproof cabin. Coupled with medium pressure compressors in a centralized installation or remotely connected to the pneumatic line, the boosters are a flexible and cost-effective solution for feeding high pressure air to manufacturing processes and tools.
|
|
Up to 70 bar
Customer-led and service-driven: a special blend of support and performance
The performance of our machines3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately - even for earliest generation compressor parts.
|
|
To be able to meet customer’s demands for particularly low-maintenance compressors, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately – even for earliest generation compressor parts.
|
|
To be able to meet customer’s demands for particularly low-maintenance compressors, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately – even for earliest generation compressor parts.
|
|
|
|
