|
|
- oil-free
- up to 150 bar
- absolutely gas-tight
- compressed air and gas
- ATEX-conformity
- air- or water-cooled
|
|
HAUG PISTON COMPRESSORS FOR OIL-FREE COMPRESSED AIR
HAUG guarantees technically and economically optimal solutions for compressed air supply, with the security of a constant oil-free quality of the compressed air.
Universal ways of operation
Due to the dry-running technology the HAUG piston compressors can be out of operation, without causing any problem compared to lubricated-compressors and screw compressors. Operation in idle run mode is not required.
Universal application for:
· Continuous operation
· Intermittent operation
· Emergency or reserve operation
|
|
ENVIRONMENTALLY FRIENDLY COMPRESSION OF GASES – A HAUG SPECIALITY
HAUG gas-compressors run absolutely oil-less with dry lubrication. The oil-less compression avoids any contamination of the process gas and the process machinery.
To obtain an absolutely hermetically gas-tight unit, HAUG gas compressors are equipped with a magnetic coupling. For this construction the permanent total gas leakage is less than 0.001 mbar l/s during operation as well as at standstill. In the case of helium at 3 bar pressure the gas loss is merely 5 grams per year! Contamination of the ambient environment through gas leakage with these compressors is practically impossible.
|
|
OIL-LESS AND DRY COMPRESSION –
A HAUG SPECIALITY
HAUG is the inventor of oil-less and dry-running piston compressors. For decades HAUG compressors have proved themselves in difficult operational conditions and climatic environments. HAUG dry-running compressors are ideal for continuous operations, intermittent operations, and emergency operations with practically no running in time.
|
|
|
The Reciprocating Compressor Division is involved with the design, development and manufacture of single and two stage reciprocating compressors.
|
|
| ... products without technical information |
| |
Couplings to separate and connect hydraulic lines
versions for manual or automatic coupling
versions also for pneumatic and vacuum lines
can be coupled or uncoupled against pressure or only in depressurised mode
ND 3, 5 and 8
max. operating pressure 200 bar up to 500 bar
|
|
Rotary couplings and rotary valve couplings
for oil supply to rotating and swivelling installations
they have to be mounted in the centre of rotation of the installation.
In contrast to rotary couplings rotary valve couplings take on the control functions for clamping and unclamping.
max. operating pressure 250 / 500 bar
|
|
Parker's PS Series Swivels are designed to meet the application needs and performance requirements of the market. Pressure capabilities up to 5000 PSI, 1/4" through 2" body sizes, a variety of port options, and zinc with clear trivalent chromate (hexachromium free) plating. PS series swivels are available with in-line and 90 degree configurations.
Features:
* Hardened bearing races for extended service life
* Full flow design to minimize pressure drop
* Reduced bearing load design
* Variety of seal options
* Sealed bearing design - bearings isolated from media flow path
* Product designed for field maintenance
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
|
SafeWay’s S10 Series is a general purpose, double shut-off quick coupling capable of containing a wide variety of fluids. Primarily used for the transfer of hydraulic fluid, they can also be used with water, steam, chemicals and some gases. Widely used in both stationary and mobile industrial applications.
|
|
|
SafeWay’s S70 Series offers unique internal valving, combined with SafeWay’s two-way sleeve feature, allowing one-hand connection under full system pressure. The body (coupling) half can be mated to either a ball valve or poppet valve ISO male tip (nipple). The S70 Series is used primarily with agricultural equipment. It is original equipment on full size tractors and front-end loaders. Use when connection and disconnection under pressure, without the use of tools, is desirable.
|
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure.
|
|
CMP-17L Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-32 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-18 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure.
Technical Features:
1.High system pressure.
2.Non-metallic construction.
3.Compact size.
4.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
5. Uncontaminated flow.
|
|
| ... products without technical information |
| |
|
The medium pressure rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos and hoppers. Furthermore, they serve as feeding devices in pneumatic dilute phase conveying systems with a differential pressure up to 2.0 bar (g).
|
|
High pressure rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. Furthermore they are used as a feeding device in pneumatic dense phase and dilute phase conveying systems with a differential pressure up to 4 bar (g).
High Pressure Rotary Feeder Type HDS
The HDS rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. Furthermore they are used as a feeding device in pneumatic dense phase and dilute phase conveying systems with a differential pressure up to 3.5 bar (g).
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
|
|
see the results for the following category : 
