Coolers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Power: 350, 400, 100, 250 W
Maximum temperature: -10 °C - 70 °C
Flow rate: 15 l/min
Compact recirculating chiller with powerful 400 W cooling capacity, designed for simple cooling tasks down to -10 °C. The RC 2 lite is the perfect peripheral device for the cooling of rotary evaporators, reflux condensers ...
IKA
Power: 90 W - 800 W
Maximum temperature: -30 °C - 70 °C
Flow rate: 21 l/min
High-efficiency circulating chiller with powerful 400 W cooling capacity. Designed for cooling applications up to -20 °C. The speed-controlled PEEK pump allows an indirect continuous adjustment of the maximum pressure ...
IKA
Power: 200 W - 1,400 W
Maximum temperature: -30 °C - 80 °C
Flow rate: 31 l/min
Powerful recirculating chiller, designed for external cooling applications up to -30°C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively ...
IKA
Power: 0.4, 0.33, 0.19, 0.05, 0.2 kW
Maximum temperature: -5 °C - 40 °C
Pressure: 1.2 bar
... control, Peltier chillers are ideal for simple temperature control tasks in laboratories and research facilities. They operate without refrigerants and are therefore very environmentally friendly. At the same time, the ...
JULABO GmbH
Power: 40 W
Maximum temperature: 50 °C
Pressure: 10 bar
... type gas cooler is used to lower the dew point of humid sample gas to avoid condensation in the analyzers. An extremely stable and low gas dew point avoids water vapor cross-sensitivity and volumetric errors. Integrated ...
The module cools down the feed water before entering into the economizer. This ensures a higher flue gas heat utilization and thus increases the efficiency of steam boiler systems. Save up to 1.8% in fuel costs through a higher level ...
Power: 2,800, 2,000, 1,700, 1,000 BTU/h
Maximum temperature: 52 °C - 93 °C
... 12 Continuous Operation Cabinet Cooler NEMA 12 (IP54) Cabinet Coolers (dust-tight, oil-tight) are ideal for general industrial environments where no liquids or corrosives are present. High Temperature ...
EXAIR
Power: 2,800 BTU/h
... Cabinet Cooler, cold air distribution kit and filter. Unlike an expensive, freon-based air conditioner, EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with ...
EXAIR
Power: 1,000 BTU/h
... control systems are the most efficient way to operate a Cabinet Cooler. They save air by activating the cooler only when internal temperatures approach critical levels. Thermostat controlled cooler ...
EXAIR
Power: 0 kW - 72 kW
Maximum temperature: -25 °C - 80 °C
... performance ensure a high level of process reliability. Apart from a robust and sturdy steel plate enclosure, the kcw B1 cooling system also features a modern operating display with combined key and touch options. In ...
technotrans solutions GmbH
Power: 0 kW - 160 kW
Maximum temperature: -25 °C - 50 °C
The kcw 2B cooling system is ideal for temperatures from -25°C to +50°C and a high cooling demand. As a solution for sputter deposition and metallisation processes, it ensures reliable and safe cooling up to 166 kW. ...
technotrans solutions GmbH
Power: 1.3 kW - 380 kW
Maximum temperature: -30 °C - 90 °C
Flow rate: 3.6 m³/h - 84 m³/h
... cooling capacity possible Numerous equipment options such as redundant operating pumps, stainless steel pumps and diverse evaporator versions
technotrans solutions GmbH
Power: 0.6 kW - 5.66 kW
Maximum temperature: -10 °C - 45 °C
Flow rate: 1 l/min - 16.2 l/min
... variations in their operating temperature and can be compromised by dangerous overheating. The new WLA Compact industrial chillers are designed to provide accurate temperature control of the process fluid and reliable ...
COSMOTEC
Power: 5 kW - 47.5 kW
Maximum temperature: -20 °C - 45 °C
Flow rate: 9.7 l/min - 136.2 l/min
... ERP chillers is characterized by high thermodynamic performances that exceed the most stringent minimum energy efficiency requirements imposed by the Ecodesign directive starting from 2021. Strengths Energy Efficiency: ...
COSMOTEC
Power: 2,000 W - 16,000 W
Maximum temperature: 13 °C - 25 °C
Flow rate: 8.5 l/min - 25 l/min
... performance, ORA oil chillers can perfectly meet the requirements of these industrial applications. Main Features Refrigerant fluid R134a (2÷4kW); R407C (6÷16kW) Non-ferrous hydraulic circuit and stainless steel ...
COSMOTEC
Power: 264 W
Maximum temperature: 24 °C - 38 °C
Flow rate: 90 ft³/min - 100 ft³/min
Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. - Sleek, modern design - Noise reduction of 78%, when compared ...
ITW Air Management
Power: 1,500 BTU/h
Maximum temperature: 24 °C - 38 °C
Flow rate: 25 ft³/min
Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. - Sleek, modern design - Noise reduction of 78%, when compared ...
ITW Air Management
Power: 2,500 BTU/h
Maximum temperature: 0 °C - 80 °C
Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. - Sleek, modern design - Noise reduction of 78%, when compared ...
ITW Air Management
Power: 0 W - 22.4 W
Flow rate: 20, 151 l/min
Pressure: 3,000, 3,500, 4,500 psi
... of the necessary components of a properly designed hydraulic system into one pre-assembled unit. The original Hydraulic Cooler MH Series Hydrapak are designed to be all-in-one hydraulic drive conditioning system. ...
GARDNER DENVER
Maximum temperature: 0 °C - 100 °C
Flow rate: 10 l/h - 120 l/h
Pressure: 0 bar - 16 bar
Stainless steel sampler coolers. Take boiler water samples safely. Suppresses flash steam ensuring an accurate sample. Description The Spirax Sarco SC20 sample cooler is used to cool samples of ...
Power: 527 kW - 7,033 kW
Maximum temperature: 0 °C - 100 °C
... Hitachi High Efficiency inverter Controlled Centrifugal Chiller Hitachi High Efficiency Inverter Controlled Centrifugal Chiller Hitachi High Efficiency Inverter-controlled Centrifugal Chillers ...
Hitachi-Johnson Controls Air Conditioning Inc.
Flow rate: 55 m³/h - 900 m³/h
Energy-efficient version of the RTT fan-and-filter units with EC technology. From 180 m³/h with integral control interface (0-10 V / PWM input and tachosignal output) to regulate and monitor the fan.
RITTAL
Power: 2.5, 4, 5.5 kW
Blue e+ chillers are efficient, flexible and compact. They offer central, cost-effective chilling of the cooling water and are used to supply air/water heat exchangers etc. Up to 70% energy savings thanks to speed-controlled ...
RITTAL
Power: 30,000, 35,000, 53,000 W
Cooling via high-performance compact impellers. The LCP draws in the air at the sides at the rear of the server enclosures and blows the cooled air back into the front part of the server enclosure at the sides.
RITTAL
Power: 1,500 BTU/h
Flow rate: 35 ft³/min
Pressure: 5 bar - 7 bar
... it easy to maintain. Air flows into the cooler through a 1/4 in BSP (British Standard Pipe) inlet and is cooled before being piped into the cabinet through ducting (supplied with the cooler). This ...
Power: 0.12 kW
Cooling lubricant module for a professional wet grinding. Details Perfect surface results due to effective cooling lubricant supply Reduces the temperature of the workpiece. Binds the swarf. Closed circuit. Combination possibilities ...
Maximum temperature: -75 °C - 125 °C
Flow rate: 140 ft³/min - 740 ft³/min
Pressure: 2 psi - 68 psi
Edwards Polycold® PGC Gas Chiller requires no pre-cooling This Gas Chiller cools compressed dry gases, such as nitrogen, argon or air, from ambient to cryogenic temperature without pre-cooling. PGC ...
EDWARDS
Power: 120 W
Maximum temperature: -135 °C
High-speed pumping of water vapour guaranteed The Edwards Polycold® P-102 Cryocoolers provide compact, easy-to-use alternative to liquid nitrogen in small vacuum systems. These cryogenerators effectively eliminate the cost, inconvenience, ...
EDWARDS
Power: 6 W - 50 W
Maximum temperature: -203 °C
A compact, high-performance cooling system The Edwards Polycold® PCC Compact Cooler is a compact, high-performance cooling system that brings new levels of efficiency and reliability ...
EDWARDS
Power: 230, 330 W
Flow rate: 2.2, 2.6 l/min
•High cooling capacity (200 kj/min) • No priming water required Cascade pump eliminates the need for priming water. •Easy maintenance No tocls are required to replace coolant. Tank and fille^ are easily removable, which makes for easy ...
Power: 16 kW - 41 kW
Carrier Commercial Systems and Services
Power: 15 kW - 18 kW
Carrier Commercial Systems and Services
Power: 16 kW - 32 kW
Flow rate: 1,640 l/s
Pressure: 1,000,000 Pa
Carrier Commercial Systems and Services
Power: 325 kW - 2,425 kW
Maximum temperature: -15 °C - 80 °C
... efficient cooling and heating in a single product. The new GEA Blu-Red Fusion is a combination of the successful GEA Blu chillers (low stage) and GEA Red heat pumps (high stage). At best-in-class efficiency, the GEA ...
Grasso International
Power: 370 kW - 1,270 kW
Maximum temperature: -15 °C - 40 °C
... operation. The chillers – completely factory-assembled with air-cooled condensers – allow for simple installation and are especially suitable at sites without cooling water management. Highlights & Technical Features Screw ...
Grasso International
Power: 390 kW - 1,730 kW
Maximum temperature: -15 °C - 18 °C
GEA BluAstrum provides an economical entry into the GEA Blu chiller family, without compromises regarding the technological concept. This chiller series is especially characterized by minimal maintenance ...
Grasso International
The unit is manufactured by Haewa, and is an air-to-air heat exchange system, which has been specifically developed to be used in dust-free cooling of cabinets. The model has the capacity to cool cabinets with temperatures up to +40 °C. ...
The Water/Air Heat Exchanger is manufactured by Häwa GmbH, and is specifically designed for enclosure air conditioning application. This device is made as economic and environment-friendly alternative to heat exchanger with chemical ...
häwa cabinet air conditioners can be used as independent devices up to an ambient temperature of max. 55°C. Similar to air-to-air heat exchangers, they also have two completely separate sealed air circuits per IP 54, equipped with 1 fan ...
Power: 0 kW - 10 kW
Maximum temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 100 l/min
Our standard oil/air cooler range is still setting the bench mark in the markets. We offer short lead times and the densest program of pressure resistant coolers with all relevant features. Our internal ...
ASA technology Produktions- und Vertriebs GmbH
Power: 1.5 kW - 3 kW
Maximum temperature: -20 °C - 100 °C
Flow rate: 35 l/min - 102 l/min
The oil / air coolers of our CC series are autonomous cooling systems with an integrated circulation pump. They work as a separate cooling unit or as a filter cooling unit with an adequate filter. The ...
ASA technology Produktions- und Vertriebs GmbH
Power: 0 kW - 0.6 kW
Maximum temperature: -20 °C - 80 °C
Flow rate: 0 l/min - 300 l/min
Our standard oil/air cooler range is still setting the bench mark in the markets. We offer short lead times and the densest program of pressure resistant coolers with all relevant features. Our internal ...
ASA technology Produktions- und Vertriebs GmbH
Extrusion lines for the production of GRANULES Bausano produces extrusion lines suitable for production of granules for subsequent moulding, extrusion or calendering, starting from virgin or recycled material. These lines are fully customisable ...
Power: 250 W - 1,200 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 35, 16 l/min
Circulation chiller for reliable continuous operation in laboratory and research applications from -10 to 40 °C The LAUDA Microcool line of user-friendly circulation chillers consists of four compact ...
Power: 1,200 W - 10,000 W
Maximum temperature: -20 °C - 80 °C
Flow rate: 37, 28 l/min
Versatile 1200 W to 10kW circulation chillers used between -20 and 40°C for dissipating process heat in laboratories, mini plants and production facilities The LAUDA Variocool circulation chillers ...
Power: 10.2 kW - 66.9 kW
Maximum temperature: -10 °C - 35 °C
Flow rate: 130 l/min - 250 l/min
Energy-efficient circulation chillers from -10 to 35 °C with unique connectivity LAUDA Ultracool circulation chillers set new standards in energy efficiency and connectivity. The new generation of ...
Power: 16 kW - 37 kW
Maximum temperature: 1, 5, 20, 15 °C
Flow rate: 750 l/h - 4,000 l/h
... Customisation available • Food-grade materials and water • Total drainage * Clearance height required: + 500 mm These chillers have been developed for industrial capacities ranging from 750 to 2000 litres. They ...
SOREMA
Power: 8 kW - 14 kW
Maximum temperature: 1, 5, 20, 15 °C
Flow rate: 350 l/h - 1,300 l/h
... Customisation available • Food-grade materials and water • Total drainage * Clearance height required: + 500 mm These chillers have been developed for industrial capacities ranging from 350 to 650 litres of water ...
SOREMA
Power: 2 kW - 4.5 kW
Maximum temperature: 1, 5, 15, 20 °C
Flow rate: 110 l/h - 500 l/h
... Large-capacity insulated water tank • Food-grade materials and water * Clearance height required: + 500 mm These chillers have been developed for semi-industrial capacities. They are complemented by water dispensing ...
SOREMA
Definition: Rapid cooling for refractory steel laddle, to cool items treated under protective gas, avoiding contact with air. Construction: Metal construction. Ventilator within housing. Closing cover to conduct hot air towards the ...
Power: 18.5, 4, 7 kW
... Vertical scraper in stainless steel complete of: Wear proof profiles made in rubber for foodstuffs. Stainless steel evaporator “dry expansion” with external evaporation chamber. Endless screw gear motor. Condensator ...
Power: 4, 7, 10, 18.5 kW
Maximum temperature: -5 °C - 25 °C
Flow rate: 495 l/h - 4,500 l/h
... Vertical scraper in stainless steel complete of: – Wear proof profiles made in rubber for foodstuffs. – Stainless steel evaporator “dry expansion” with external evaporation chamber. – Endless screw gear motor. – Condensator ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining