|
|
ALMEMO datalogger offer a professional measurement and documentation for research and developement applications and for process control. The instruments are available as various versions with many options and adaption possibilities. There are solutions for single measurements well as for complete data acquisition with a big quantity of measuring channels. The instruments can be installed as decentral data acquisition and in a network with up to 99 units. Nearly each sensor is adabtable via intelligent ALMEMO connectors or multisensor connection sockets. The measuring data can be transfered via radio transmission, modem, current loop, internet, ethernet or SPS. ALMEMO datalogger from AHLBORN are the gurantee for save data acquisition with professional measurement equipment.
|
|
Data Logger - Series BDL
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model MTL10
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model DL-8T
Measure Temperature, Stores up to 1,048,000 Readings
Data Logger - Model DL001
Measure Temperature, Stores up to 32,768 Readings
Data Logger - Model DL-PRT150
Measure Temperature, Pressure, or RH, Store up to 87,000 Readings, 4-Channel
Data Logger - Series DL6
Measure Temperature, Pressure, or RH, Store up to 32,768 Readings, 5-Channel
|
|
With these loggers you can read-out the majority of our sensors. We have a waterproof version, meant for unattended logging up to 6 months. And we offer a handheld logger with a LCD-display.
|
|
The Gage Box remote Data Acquisition System is a shop floor proof, expandable gauging system.
The system is composed of dedicated, stackable modules to manage analog sensors and digital Input/Output signals.
All modules are daisy-chained together and exchange measurement data, programming data and I/O signals with the E9066™ Industrial PC through a simple RS232 serial link. Any commercial PC can also be used.
The system allows direct interfacing and data collection from TESTAR probes or measuring cells, and from a wide variety of third party sensors.
All data acquisition functions (sampling, signal conditioning, A/D conversion) are performed locally (freeing the computer from any overhead or operating system latency), and then conveniently transferred to the system’s companion Industrial PC, the E9066s™, or to any PC-compatible data collector, via a standard RS232 port.
A high speed, serial communication link with a dedicated ISA-compatible interface card is also available, for process-intensive or critical measurement applications. |
|
Microprocessor based Data Logger model DATALOG-16
Product Description:
In a process industries, where "n" number of parameters are required to be monitored and recorded, for various reasons, the data logger featured here is most ideal. Using single data logger it is possible to monitor and log the temperature or process values sensed through thermocouple or RTD(Pt-100) or other process variables, of maximum 16 different points. One or more data loggers can be combined for monitoring more than 16 channels. The measured analog values are also stored in the internal non-volatile memory along with the real time and date. The stored datas can be down loaded to the dot matrix printer using the built in parallel port and/or on to the computer using the built in serial port on RS485 link. Alarm facility is provided by common high and low relays and 32 dc drivers for high and low alarms per channel. External relay cards can be operated using this driver signals.
Supporting window based data acquisition software allows user to monitor the on-line or off-line datas in the graphical or tabular form on the screen. The high and low alarm levels are also programmable for each channel.
PLEASE CHECK MORE DETAILS IN CATALOGUE SECTION
http://pdf.directindustry.com/pdf/libratherm-instruments/data-logger-for-temperature-humidity-etc/28920-29606.html |
|
Temperature Control with the data logger "Penguin"
- available in two variations
for temperature (16.000 measuring values)
for temperature and humidity (32.000 measuring values)
- Measuring range temperature: -40°C to 80°C
- Measuing range humidity: 0 to 100% RH
- High accuracy
- Infrared Interface
- Easy Programming
- Various programming possibilities
Just have alook at our Online-Shop:
www.temperature-shop.eu
Here you will also find information about our further data loggers and product range all around the temperature measurement:
- Temperature Sensors
- Temperature Humidity Sensors
- Thermocouple Connectors
- Temperature Measurement Instruments
- Digital-Thermometer
- Infrared Thermometer
- Data logger
- Recorders
- stationary Pyrometers
- Controllers
- Indicators
- Transmitters |
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user. |
|
With or without display, compatible with extreme temperatures (very high and very low), the new range of KISTOCK dataloggers lets you monitor (continuously or on-demand) your manufacturing process, storage premises, transport chain...
With these new accurate and self-contained dataloggers, you can store from 16,000 to 100,000 measurement points (temperature, humidity, light, current and voltage); they are compatible with external probes (up to 4):
- humidity-temperature (thermocouple K-J-T, Pt100),
- ammeter clamps,
- 4-20mA and 0-10V
When connected to the USB port of your PC and when configured in ONLINE mode, the KISTOCK becomes an acquisition system, allowing you to measure 5 parameters simultaneously, in real-time.
KILOG work on batteries, which can be replaced when required. You can configure the working mode, display mode, LED status, recording duration…
One click and you can quickly download data (1000 points per second) from your KISTOCK (or from the Data Recorder). Once the data have been automatically saved, you can process data with clear and accurate tables and graphs |
|
ShockWatch temperature recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device monitors and records temperature and humidity through a linear dual channel. Its small size and built-in sensors allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
Can also be used without the radio function
-Evaluation of communication either via radio or by means
of a logger at the PC
-Usable range of the radio connection: max. 350 m in the
open air, and max. 75 m indoors
-Data transmission of up to 200 loggers simultaneously onto
the screen
-All data is automatically stored on the PC in an Excel file
-Alternatively, stored data can be transmitted
conventionally directly at the PC via a logger interface or
IrDA (infra-red)
-All loggers have a 3-digit LCD display for the currently
measured values
-Up to 16,000 measured values can be stored in the logger
-Sampling rate: between every 10 seconds and every 2 hours
(variable)
-Storage capacity between 40 days and 3 years
-Internal temperature and moisture sensor
-Variable hi/low limit alarm (with visual warning)
-Min/max value indication according to hours or days
-Each logger has its own ID number
-Radio module with acoustic and LED alarm and hi/low alarm
contact 30V/2A
-The external sensor can also be connected directly to the
radio module
-Replaceable battery (battery life approx. 2 years) |
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 şC (-31 to +176 şF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP. |
|
Precise measurement and control of Humidity (%RH) and Temperature is essential in the pharma, food, chemical and other industries. The models featured here suits various applications of simultaneous measurement and control of %RH and Temperature. Indicators are available for simultaneous display of temperature and %RH on 0.5%u201D to 4%u201D large displays. PID controls are available for maintaining %RH and Temperature in the stability chambers, Walk in chambers, dryers etc%u2026 Eight and Sixteen channel Data loggers with suitable sensors and transmitters are available for validation of chambers, storage rooms etc%u2026 Small models are also available for monitoring of %RH and Temp. in server rooms, clean room storage, hot air driers etc%u2026 All models are available with serial interface for communicating with computer. 21 CFR part 11 compliant software is also provided as per FDA regulations.
APPLICATIONS
For BOD, Environmental/ Walk-in test chamber, HVAC applications and for validation purpose
|
|
The HPM420 Series readouts and associated pressure, temperature and flow sensors provide an accurate, economical and user friendly solution for servicing and commissioning hydraulic systems and components. The HPM420 readouts have two inputs which recognise which pressure, temperature or flow sensors are connected and automatically sets the correct calibration to each input for the type of sensor being used.
The HPM440/460 is ideal for use as an in-house or portable display and data logging instrument.
Powered by a 9 Volt rechargeable battery, this easy to use diagnostic test system is a valuable tool for preventive maintenance, verifying component settings, pin-pointing poor system performance, measuring differential pressure and capturing harmful pressure spikes. |
|
Datapaq data loggers are compact, rugged and accurate. They can record up to 130,000 data readings over 8 or 10 selectable channels, making them the most powerful data loggers available.
The data loggers are specifically designed to work in the high temperature environments found inside many furnace processes. These loggers will withstand high temperature, pressure and vacuum environments, and can transmit data in real-time by telemetry if required.
|
|
This multi-purpose, 8-channel data logger enables you to
record various physical measurements as Pt100, thermocouple, NTC, voltage, currency and frequency.
Due of the graphic display you are able to analyse the measurement on our
DaqPro, so there is no need to put the measurements on a PC or to print
it out.
Features:
- 8 measuring channel for different measurement sizes configurateable
- Inputs for: 0-24mA, 0-5mV, 0-10V, NTC, Pt100, thermocouple, pulse and frequency
- Large graphical display 64x128 pixel
- Large data storing: 512 KB
- 16-bit sampling resolution
- incl. Windows Software and transporting case
- Open collector output for alarm |
|
8-channel, Web-enabled temperature measurement modules :
- WEB-TEMP supports J, K, R, S, T, N, E,
& B type thermocouples, 2-, 3-, or 4-wire RTDs and thermistors,
and semiconductor temperature devices
- WEB-TC supports thermocouples only
- Built-in ambient CJC temperature sensor
- Independent temperature inputs
- Built-in Web server/Web page |
|
Handy logger MR2041-E is a palm size data logger, it capable to store up to 10000 data per each channel. Power supply of logger is selectable from AA battery or AC adaptor, so it is usable as a portable type logger or fixing type logger. Using the multi-media memory card (MR-2041-M) can stores measured data up to 5 million.
Using the exclusive software, recording/recalling of data and programming of logging parameters can be executed with logger or through a personal computer.
- Input signals: thermocouple K, E, J, T, 0 to 5V, 0 to 20mA
- Simultaneous 4 channels, measurement and display
- High/low alarms for each channel
- External memory (multi-media card) is usable.
- Calculation function: maximum / minimum / average
- Logging method: log mode and tag-mode
- Data process-able through a personal computer
- CE marking, IP 64 dust tight and splash proof enclosure
- AA battery supply
|
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs |
|
The Latest in the OCS Range Integrates Screen, PLC, Network and I/O "All in One" Product.
The OCS NX has the following features:-
- 128x64 or 240x128 Pixel Backlit LCD Screen.
- Embedded Ethernet.
- Optional Fieldbuses.
- Compact Flash.
- Smartstack Interface.
- 2 Serial Ports.
- USB Programming Port.
- Fibre Optic Interface.
- Integrated Fast Counter I/O.
- Membrane with Function Keys.
- Optional Touchscreen.
- Optional Integrated Base I/O.
Instead of using Separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution and is easily programmed by a SINGLE software package called CSCAPE which allows screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD it is incredibily easy to use.
Contact us for more Pre Release Information
|
|
| Our Model 798 Handi-Logger turns your instrument array into an active monitoring network, producing a new level of awareness of structural and ground behavior. |
|
Description
The FBG-Datalogger is a compact, low-cost and completely intelligent, portable device that can monitor up to 16 different optical lines. The core of the device is a state-of-the-art Fabry Pérot tunable filter. The FBG-Datalogger is controlled with a built-in computer and touch screen. Controlling through TCP/IP, RS232 or GPRS is possible as an option.
The FBG-Datalogger provides powerful, reliable, easily integrated measurement options, allowing Fibre Bragg Grating (FBG) and other optical sensor developers and system integrators to focus on customer application needs and installation requirements.
The FBG-Datalogger was specifically designed to meet the diverse needs and challenging requirements of the fibre optic sensor community. The speed, narrow line width and superb repeatability of the Interrogator provide the accuracy and resolution needed for a wide range of optical sensing applications.
Features
- 10pm Wavelength Accuracy
- 40nm Scan Range
- 5 mW Launch Power
- 1pm Repeatability
- Fast Scan time
- 8 or 16 Optical lines
Applications
- Pipeline Stress Monitoring
- Offshore Oil Platform Riser Stress Monitoring
- Oil well Temperature and Pressure Monitoring
- High-Tension Line Temperature Monitoring
- Geotextile Strain Monitoring
- Security / Defense Fence Monitoring
- Civil Structure Stress and Strain Monitoring
- General purpose Optical Spectrum Analysis |
|
| ViewGraf XP combines the best features of a modern data acquisition system with those of a traditional chart recorder at an affordable price. Virtually every aspect of ViewGraf XP is modular, enabling unlimited flexibility, from the removable 11 inch real-time writer and 12.1 inch real-time display panel, to a wide variety of signal conditioners for any type of signal. Record data directly to the onboard high capacity hard drive or to the optional real-time writer. While recording, perform real-time calculations as virtual channels using over 30 standard functions or create any custom function up to 200 characters in length. The onboard Windows XP operating system offers windows familiarity, easy data transfer to a PC network, quick reporting to any printer and removable media capabilities for long term storage. |
|
Micro Technic offers a range of combined RTUs and data loggers, dedicated at bringing your remote process data available anywhere and anytime!
Bring your product online with our range of GPRS data loggers!
|
|
Sensor (ICP® type) input capability
SIR-1000i Sensor(ICP®type) input capability in addition to all the same features of the SIR-1000 The SIR-1000i has built-in ICP® power supply, which enables direct connection with ICP® sensors. This function saves space at a recording site, making the SIR-1000i a perfect fit in field recording applications. Input mode is switchable between sensor and direct voltage, the later being SIR-1000's standard. The type of input mode is recorded on tape along with other auxiliary information such as input range and time code and is displayed on play back.
Selectable input mode SENSOR or DIRECT
Extended input range -For SENSOR input : ±0.1, 0.2, 0.5, 1, 2, 5, 10Vpk/7 steps -For DIRECT input : ±0.1, 0.2, 0.5, 1, 2, 5, 10, 20Vpk/8 steps
Compatible with SIR-1000, data recorded on the SIR-1000 can be played back on the SIR-1000i, and vice versa.
Indicators : Colored LED's for SENSOR input modes and warning indication.
Up to 128 channel capability |
|
DataRec is fully programmable data recorder that allows to collect production or test data in a simple, fast and reliable way.
The presence of different interfaces allow an easy connection to many kinds of industrial plants, equipments and test instruments.
DataRec may be connected to your existing ethernet LAN to share the collected data as a normal Personal Computer.
Moreover thanks to the integrated web-server you could access your data from the internet or they could be sent directly to your e-mail address at prefixated times.
The two USB interfaces allow the connection with Personal Computer, printers and additional mass storage devices.
Finally, adding the expansion boards is possible to manage optocoupled digital I/O and analog inputs.
DataRec comes together with all the software needed for its configurations and for view and manage the collected data.
The collected data may be exported to the most common spreadsheet formats and it is also possible to connect it to your existent SQL database server through your ethernet network. |
|
|
