|
|
Pressure transmitter with datalogger DL/63 :
- Pressure ranges from 0‘50 mbar and -1‘1000 bar available
- Accuracy pressure measurement ‘ά 0.1%
- Measuring interval adjustable from 2 s to 24 h
- Non volatile data memory for 130'000 measurements |
|
| SPC-LightTM has been designed to collect and analyse data easily so that you can take control of your processes. It allows you to monitor performance and achieve sustainable improvements in quality and profitability. It has been implemented in a wide variety of manufacturing industries, from automotive to electronic; from steel to glass. |
|
The key tool for temperature monitoring
TomKEY : the USB key that displays and records temperature
> Integrated USB port, no adapter needed
> Free software
> Calibration certificate included (traceable to international standards)
> High accuracy 0.3°C
> Dust and waterproof IP 67
> Direct Min/Max and alarm readings (no computer needed)
> Measuring range from -40 to +80 °C |
|
SMARTLOGGER 3000 Maintenance free,extremely rugged design High logging capacity Advanced GPRS/EDGE/SMS/e-mail options
10 years batter life
Alkaline battery or solar panel operation options |
|
Digital Data Recorders
Our Digital Data Recorder systems are designed to match every conceivable combination of performance and budget. From the flagship DDR-2000 to the economical DDR-16, choose the model that best suits your requirements. Each DDR system is available with a variety of software options supporting a wide variety of industry standard data formats. Ease of maintainability is accomplished by intelligent selection of commonly used PC hardware, with the foremost requirement of data integrity. |
|
The data logger serves for the supervision and event storage in four channels with the following features:
* one DMS-bridge input
* two Pt-100-inputs
* one frequency input for NPN- or PNP-signals
* battery buffered alarm loft for at most 50.000 stored events
* battery buffered real time watch
* serial interface for PC communication
* event supervision in second time |
|
USB 1MS/s, 16-bit multifunction module with BNC inputs
- 1 MS/s 16-bit A/D converter
- 16 BNC differential analog inputs, with 7 programmable input ranges from ±100 mV to ±10 V full scale
- Over-sampling mode, including line-cycle rejection for low-level voltage measurements, even in the presence of AC power line noise
- 1 MS/s, 16-bit analog outputs
- 16 digital I/O
- 4 counter inputs capable of measuring frequency, period, pulse width, or quadrature encoders up to 20 MHz
- 2 timer outputs |
|
With more than 100,000 MGCplus channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. The wide spectrum of supported transducers, fieldbus connections and standard PC interfaces are some of the features which indicate that it is a truly integrated measurement device.
The MGCplus is today the data acquisition (DAQ) system of choice for almost all industrial, laboratory and R&D measurement applications in:
Test rigs
Calibration
Manufacturing
Weighing
Experimental stress analysis
Mobile data acquisition.
Main features and benefits:
Modular, computer-controllable amplifier system
Self-supporting plug-in amplifier units available for all common measurement quantities, e.g. SG transducers, inductive transducers, DC voltages, thermocouples, torque transducers
Various computer interfaces (RS232, RS485 and IEEE488), also available with standard protocols such as 3964R, ModBus and Ethernet
Parallel, synchronised data acquisition from max. 16 channels per device, 10,000 samples per sec/channel
Operation possible via control panel display or PC in conjunction with relevant software. |
|
Automatically creates test certificates, A4-format
Test graph on your own PC or laptop
Up to 4 input channels for pressure or temperature
Suitable for all types of pressure test units
Calibrated system, ready-for-use
User-friendly software including manual on CD ROM
|
|
DaqBoard/1000 Series
16-Bit, 200-kHz PCI Data Acquisition DaqBoards
The DaqBoard/1000 Series of low-cost, multifunction PCI boards are ideal for OEM or embedded applications. These boards are best suited to applications with pre-conditioned voltage signals up to 16-channels. For applications that require channel expansion or signal conditioning for measuring temperature, strain, vibration and more, consider our DaqBoard/2000 Series with its line of over 40 DBK signal conditioning and expansion options.
Key Highlights
16-bit, 200-kHz A/D converter
8 differential or 16 single-ended analog inputs (software selectable per channel)
Up to four boards can be installed into one PC
100% digital calibration
512 location channel/gain FIFO
DMA bus mastering for synchronous analog I/O, digital I/O, and counter inputs
Trigger modes include digital and software, with <5 ΅s latency
Virtually infinite pre-trigger buffer
Two 16-bit, 100-kHz analog outputs with infinite continuous waveform output capability
(model /1000 only)
24 digital I/O lines, can be scanned synchronously or asynchronously with analog
and frequency inputs
Four counter/pulse input channels can be scanned synchronously or asynchronously
with analog and digital inputs
Two timer/pulse output channels |
|
Galaxie software is comprehensive chromatographic data handling software for both standalone and client server application.
Galaxie software provides:
A choice of client server or standalone configurations and control of instruments from multiple vendors.
Chromatographic data acquisition, peak processing and calculations
Automation
Regulatory Compliance
Custom calculation using Galaxie variables
Galaxie has a series of plug ins and industry driven tools which provide custom calculations and advanced automation including: advanced multi-instrument/LIMS automation, calculations for flavors and fragrances, automated methods development and method validation, database storage and retrieval of chromatographic files and petrochemical calculations.
Galaxie software serves the needs of pharmaceutical, petrochemical and environmental industries
|
|
The MSX-Box (Measurement Solution eXtended) is a realtime embedded system for networked control, regulation and acquisition of measurement data. Equipped with standard components like PCI backplane, PCI I/O board, CPU etc. the MSX-Box works without wearing parts like hard disk, drive, keyboard, mouse etc. It saves place and therefore can be integrated easily into small 19" racks or mounted on a rail.
In the MSX-Box also further PCI measurement boards that are available on the market can be integrated.
Via Ethernet (TCP/IP) or RS232 interfaces measurement data can be exchanged with other systems. An IP-address can be specified for the system. Furthermore, the MSX-Box supports server functions so that the system status or current processes of remote computers can be called.
Further interfaces are optionally available:
1 x RS232 or 1 x RS485 optically isolated as well as a field bus interface and 1 x profibus slave or rather 2 x interbus and up to 8 CAN interfaces.
The CPU (MIPS 64 bit processor), developed by Addi-Data, was chosen with the intention to grant a long-term availability of the PCI-I/O boards and herewith the durability of the applications.
|
|
| Agilent Technologies has provided data acquisition solutions for more than twenty-five years. Today we provide solutions for electrical, physical, mechanical, and acoustic applications. Our data acquisition solutions are based on industry standard software and modular hardware that can meet your current and future needs. |
|
Analog I/O
12-bit or less resolution
14 and 16 bit resolution
Temperature
Analog Output
High-drive Voltage
Voltage/Current
Voltage
Digital I/O
High Voltage
Parallel
Counter-Timer |
|
Measurement Computing today announced the release of three new 1-MHz, 16-bit multifunction USB data acquisition devices, and a cost-saving expansion module for high channel count applications. The USB-1616HS, the USB-1616HS-2, and the USB-1616HS-4 deliver outstanding performance with synchronous analog, digital, and frequency I/O in one compact package. The AI-EXP48 plug-in expansion module coupled with any of the USB-1616HS series modules can quadruple the analog input channel count.
The USB-1616HS series modules have a unique, low-latency control output mode, whereby any inputanalog, digital, or counter, can control an outputdigital, analog, or timer, based on pre-defined limits, including hysteresis. The outputs are controlled directly from the USB-1616HS series module, and do not require PC intervention. This results in response times that are measured in microseconds instead of milliseconds
The USB-1616HS series offers extensive trigger options, ranging from analog trigger with 1 ΅s max latency, to multichannel triggering, where any combination of analog, digital, and counter input channels can be combined to initiate the trigger. Other trigger modes include digital pattern, level, edge, inside/outside window, and pre- and post-trigger.
|
|
| The E-PDISO16 has one built-in 10/100 BASE-T auto-negotiation, high-speed communication port. With the Ethernet interface, you can remotely access and configure your E-PDISO16 from anywhere on the network. Only one computer can control the E-PDISO16 at one time. The networking protocol is TCP/IP. You can send your data over 100 meters at data speeds of up to 100 Mbps using only one Ethernet cable connected to your computer. |
|
Personal Daq/3000 Series
1-MHz, 16-Bit USB Multifunction Modules
Models /3000, /3001, /3005
The new USB 2.0 Personal Daq/3000 series offers high speed, multifunction data acquisition in a low-cost, portable package. The module offers synchronous and concurrent voltage input, temperature input, waveform output, counter input, quadrature encoder input, timer output, and digital I/O.
Key Highlights
1-MHz, 16-bit multifunction USB modules
Synchronous analog input, analog output,
digital I/O, and counter/timer I/O
8 differential or 16 single-ended analog inputs (software selectable per channel)
Thermocouple inputs on any of the 8 differential inputs
User-expandable up to 64SE/32DE analog inputs including thermocouple measurements
Up to four 16-bit, 1-MHz analog outputs
24 high-speed digital I/O lines
Four 32-bit counter input channels with quadrature encoder capability
Low-latency control output capability
(as low as 2 ΅s latency) |
|
| Yokogawa's PC-based data acquisition system DAQMASTERs is delivering unparalleled performance. When combined with Yokogawa's proprietary PC software, the MX100's high speed, multi channel capability, and high withstand voltage offers the ultimate in measurement power. |
|
Description
Inputs
12 analog inputs
8 temperature inputs
8 (TOR) digital inputs
5 frequency inputs
1 supply input
1 CAN machine plug
1 Hand held terminal / Debug plug
Saving
Smart Media Card
Communication
Serial link RS 232
Sample frequency
Up to 500 Hz for analog, frequency and digital inputs
Up to 25 Hz for temperature inputs
Up to 1 Mbit/sec for the CAN bus
SD Canalogger set-up
Set-up with a PC using the Canalogger ExplorerTM software application or the hand held terminal with serial link
SD Canalogger protection index with its connectors
IP 65 (weather proofing)
Resistance
1m fall
Operating temperature
- 25°C to 70°C [- 65°F ΰto 182°F]
Mass 3.85 kg
Supply voltage 10 to 30 V
|
|
DaqBoard/2000 Series
16-Bit, 200-kHz PCI Data Acquisition Daq Boards
The DaqBoard/2000 Series sets the price/performance benchmark for high-speed, multifunction plug-and-play data acquisition for PCI bus computers. The DaqBoard/2000 Series hardware design offers all of the features normally found on significantly more expensive boards, including 16-bit, 200-kHz A/D, 100% digital calibration, bus mastering, two or four
16-bit, 100-kHz D/A converters, 40 digital I/O lines, four counters, and two timers.
Key Highlights
Three DaqBoard/2000 Series PCI boards are available
16-bit, 200-kHz A/D converter
8 differential or 16 single-ended analog inputs (software selectable per channel)
Expandable up to 256 analog input channels, while maintaining 200 kHz (5 ΅s per channel) scan rate
Up to four boards can be installed into one PC for up to 1024 analog input channels
100% digital calibration
512 location channel/gain FIFO, capable of scanning all channels, including 256 analog expansion channels and digital/counter channels, at 5 ΅s per channel
DMA bus mastering for synchronous analog I/O, digital I/O, and counter inputs
Trigger modes include analog, digital, and software, with <5 ΅s latency
Virtually infinite pre-trigger buffer
Up to four 16-bit, 100-kHz analog outputs with infinite continuous waveform output capability
40 digital I/O lines, can be scanned synchronously or asynchronously with analog inputs
Digital I/O is expandable up to 272 lines, including optional isolation and relay closure
Four counter/pulse input channels can be scanned synchronously or asynchronously with analog inputs
Two timer/pulse output channels |
|
Personal Daq/50 Series
USB Data Acquisition Modules
Models /54, /55, /56
Designed for high accuracy and resolution, the 22-bit Personal Daq data acquisition systems directly measure multiple channels of voltage, thermocouples, pulse, frequency, and digital I/O. Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 and 2.0 compatible).
Key Highlights
Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 & 2.0 compatible)
Ultra low-power design requires no external power or batteries
Can be located up to 5 meters (16.4 feet) from the PC
High-resolution, 22-bit A/D converter offers reading rates from 1 to 80 Hz
Built-in cold-junction compensation for direct thermocouple measurements
Frequency/pulse, or duty-cycle measurements up to 1 MHz*
Convenient removable screw-terminal signal connections
500V optical isolation from PC for safe and noise-free measurements
Programmable inputs from ±31 mV to ±20V full scale
Digital I/O lines with open collector output for direct drive applications*
Expandable up to 80 channels of analog and digital I/O*
Up to 100 Personal Daq modules can be attached to one PC using USB hubs, for a total capacity of 8,000 channels
Digital calibration no potentiometers or adjustments required |
|
DaqBook/2000 Series
Ethernet-Based Portable Data Acquisition
Models /2020, /2001, /2005
DaqBook/2000 series of Ethernet-based portable data acquisition devices can synchronously measure analog inputs, frequency inputs, and digital inputs; equipped with built-in signal I/O capability, which can be further expanded and enhanced with over 40 DBK series expansion and signal conditioning options.
Key Highlights
Analog input, analog output, frequency input, timer output, and digital I/O; all in one compact and portable enclosure
Built-in Ethernet connection provides continuous streaming to the PC with no data loss
16-bit, 200-kHz A/D converter
Operates from -30° to +70°C
Powerable from 10 to 30 VDC, or with included AC adapter
Synchronous analog, digital, and frequency measurements
Trigger modes include analog, digital, frequency, and software
Virtually infinite pre-trigger buffer
4 channels of 16-bit, 100-kHz analog output (models /2001 and /2020)
DaqBook/2020 offers convenient front panel connectors for thermocouple, voltage and frequency measurements all in one box
DaqBooks attach to over 40 DBK signal conditioning options to assemble a low-cost system, customized to your particular application |
|
STL's 26 Bit High Resolution Multi Channel Data Acquisition System /
High Resolution Digital System Voltmeter is designed for uncompromising signal readout of various sensors in Production, Quality Control, Field Applications or Lab.
The combination of the linearity and stability of a calibration instrument with the system functionality of up to 3000 simultaneously measured channels is unique in the measurement industry.
Highlights :
26 Bit data acquisition
low noise, large dynamic, high linearity
Multi channel design for up to 3000 channels
via Ethernet
Fast and highly accurate, 8.5 digits, DC- 10 KHz
Ultra stable
Qualified for calibration and certification
Remote Testing capability via Intranet or Internet
The system is the appropriate answer for higher speed and accuracy in production testing and quality assurance as required in high throughput production, R&D, and also for all kind of high end calibration requirements.
+++ STL is searching worldwide for dealers +++ |
|
| Parr Instrument Company's 4846 Data Acquisition System is a PC based data logger system designed for users of Parr's 4840 Series Controller, which incorporates modules providing analog outputs of temperature, pressure and stirring speed. It can accommodate up to 8 analog inputs. (0-5 VDC only) and uses a 12-bit A/D converter. |
|
|
|
