|
|
Designed to handle both large and small diameter hoses in areas where hoses are required to be completely rolled into drum or rolled high enough to allow passage of overhead cranes, high vehicles or large equipment
Features
- Radio Remote Control
- Electrical control box included
- Maximum temperature of 1200° F
- Standard hose diameters of 4, 5 and 6 inches
- Galvanized steel
- Powder coated finished
- Outlet is 6 inches
- Can be ceiling suspended or wall mounted
|
|
Use of impulse-firm thermoplastic hoses type SAE 100 R7/R8 and/or 1100K/2000-2ST
according to DIN 20,022. Double hoses of this type are homogeneous connected by the whole length.
With the model W 4 R/L a centre divider is attached for the separation of the pairs of hoses.
With double spring for problem-free employment.
Individually seal-system for each hydraulic circulation.
Double sealing ring system: The first ring consists of polyurethan for the improved admission of dynamic loads; The second ring, a quad-ring, takes up static load.
Enviroment temperature for application of the hose reels from -30 °C up to 80 °C.
The rotation direction of the roles W1 R/L, W2 R/L, W3 R/L, W4 R/L can be
turned around without disassembly of the hydraulic unit fast and simply.
A multiplicity of different tube lengths connected with different hose nominal sizes of 1/4"- 1" and pressures up to 700 bar.
|
|
COXREELS® manufactures heavy duty industrial grade hose reels, cord reels and cable reels of the highest quality. Our leading, high quality, product line fulfills any conceivable application where a reel is needed. Coxreels’single pedestal style hose reels are designed to handle a wide range of applications such as air, water, oil and grease. These reels accommodate 1/4 inch I.D. hose up to 3/4 inch I.D. hose, and will hold lengths up to 100 feet on an automatic spring rewinding system. All reels are built of heavy gauge steel and have an adjustable guide arm to meet your specifications for a ceiling, wall, floor, or mobile installation. The standard latching device will hold any length of hose you need without any pull back tension.
Coxreels also features a safety line that will retract up to 80% slower than standard spring rewind reels.
|
|
T series direct hand crank hose reels
Heavy duty hose reels ideal for Transport / Refueling / Fire Fighting / Industrial. Pressures up to 10,000psi
Hose id (diameter): 12mm, 19mm, 25mm, 32mm, 38mm, 50mm
Hose length: 15m, 20m, 25m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m, 110m, 120m, 130m, 140m, 150m, 160m, 170m, 180m, 190m, 200m
Rewind Method: Hand crank
|
|
Designed for rugged, heavy duty applications requiring long lengths of hose and large storage capacity. Pressures up to 3000psi.
Hose id (diameter): 12mm, 19mm
Hose length: 15m, 30m, 60m, 100m plus
Rewind Method: Hand crank
|
|
|
Hannay Reels provides thousands of standard hose reel models and unmatched custom design and manufacturing capabilities for virtually limitless applications. The most prominent include air hose reels for pneumatic tools and machinery; water hose reels used for washdown, power washing, potable water, or in-plant fire protection; dual hose reels for oxygen/acetylene welding; and hydraulic hose reels for powering tools and machinery.
|
|
Heavy duty construction for industrial application: corrosion resistant powder coated steel, four-direction non-snag rollers reducing hose wear abrasion.
Possible mounting on wall, ceiling or floor.
Provided with swiveling support for a greater ease of work.
Adjustable guiding arm for horizontal or vertical hose release.
Fully equipped with:
- specific high pressure gas hose (propane or natural gas)
- crimped connections 3/8" left
- adjustable hose stop
- multi-position release ratchet
- user's and maintenance guide
- drilling template
|
|
|
Hannay Reels provides manual, spring and power rewind cable reels for a variety of industrial applications, including rescue and haz-mat operations, grounds maintenance and repair, video inspection, portable lighting, and broadcast and entertainment industry applications. Hannay also manufactures reels to handle arc welding cable, static grounding cable and electrical cable for power tools, lights, machinery and generators. All Hannay reels can be mounted on walls, ceilings and worktables.
|
|
Medium pressure for operating hydraulic cylinders, motors or tools. Pressures up to 3000psi
Hose id (diameter): 6mm,10mm, 12mm
Hose length: 9m,15m
Rewind Method: Spring driven
|
|
|
Hannay Reels provides both hose and cable portable reels in a variety of sizes for many applications, including: broadcasting, industrial maintenance and on-site repair, construction, grounds and lawn maintenance, entertainment, fire and rescue, plus power tools and lights.
|
|
The Tecreel range of self-retracting hose reels provides an efficient means of conveying hydraulic power from fixed to moving points on cranes, lorry mounted cranes, forklift trucks and other materials handling equipment. An integral coil spring ensures that the hoses remain constantly under tension
Maximum operating pressure 300 Bar (4350 Ibf/in)
Large ports provide efficient flow characteristics
Siamese 1/4in, 5/16in, 3/8in or 1/2in bore thermoplastic hoses
Cassette loaded coil spring for safety and easy removal
Left or right hand mounted, easily changeable on site
|
|
- Narrow frame and compact mounting base.
- Non sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlets 90° balanced pressure swivel joints 1/2" female NPT
threads.
- Standard outlets 1/2" female NPT threads.
- Pressures to 3000 psi (207 bar)
- Temperatures from -60° F to +250° F (-51°C to +121°C).
- Consult factory for other pressures & temps.
- 4-way roller assembly. Specify roller position.
- Constant Tension is available – consult factory.
|
|
ReCoila® Gen III OA, OP, P and A series reels are an ideal compact solution for all gas welding, cutting and shielding gas hose applications. The Unique External Swivel design on the Oxygen and Fuel gas reels provides added safety and ease of O ring and seal replacement. When hoses are stored by wrapping them around the bottles or trolleys there is a greater potential of a fire risk. By installing a ReCoila® gas reel you not only create a safer working environment, but also
extend the hose life and gain productivity effi ciencies.
|
|
HOSE REELS FOR WATER - LOW PRESSURE
HOSE REELS FOR HOT WATER - HIGH PRESSURE
HOSE REELS FOR HOT WATER - EMPTY (NO HOSE)
- Fixed or mobile stations
- daily tasks and occasional chores
- indoors or outdoors
Hose protection
Epoxy coated steel case protects retracted hose
Strong steel spring automatically rewinds hose after catch is released
Easy operation
Mounting bracket: wall or ceiling, fixed or pivoting support Stop catch: automatically stops the hose at the desired length
Efficiency
Air inlet: nickel-plated brass coupling, 360° rotation
High quality hose: food-grade rjubber
Connection: hose connects to tool quickly with automatic coupling
Safety in use
Automatic hose storage after use protects the operator against any risk of accident
|
|
|
|
|
|
HR/UR/TW series: hosereel/umbilical/transponder
Hose reel, Umbilical or Transponder winches are mainly built for the purpose. Winches are built to order and can be executed with a self braking worm gear or planetary gear, depending on the load required. The drive can be either electric, hydraulic or pneumatic.
The Hose reels are mainly used to spool hoses for Fresh Water supply, MDO Fuel supply and Hydraulic Oil or to spool Electrical Power Supply Cables.
The Umbilical winches in general are used to spool a combination of hoses, signal cables, coax or even Fibre Optic cables. Most of them come with slip rings and/or rotating swivels.
Transponder winches used for powered transponders are mainly used with electrical signal cables and have in most cases an electrical slip ring mounted. Winches can be supplied complete with A frame if required.
EMCÉ has supplied systems for all applications including reels with SS swivels of 6" or slip rings for High Voltage.
Applications we have supplied for can be found on the following type of constructions; Offshore Heavy lift vessels, Offshore Semi Subs, Diving Support vessels, Research vessels, Cable and Pipe laying vessels and Offshore Pile Driving barges.
|
|
|
|
|
|
The GEOVENT Hose reels are very suitable for the extraction of exhaust fumes, welding fumes and grinding dust. One clear advantage of the Hose reel is that there is always a hose available for the operator without having to "struggle" with uncoiled hoses on the floor.
- The Hose reels are supplied as type LX with a wireless control, which improves the operating comfort - OR
- as type FB with spring device. The Hose reel type FB is based on the same transmission system as the F-type, but is more simple in its construction.
The Hose reel is connected to the central extraction system or direct to the fan, MSFG 200, and it is supplied with or without nozzle or funnel. The hose diameters are: ø80 - ø100 - ø125 and ø150 mm.
The standard Hose reel is supplied with the GeoFlex exhaust hose, which can be overrun to a certain extent. The GeoFlex exhaust hose has a temperature range of -40° to +150°C - briefly up to +170°C. However, when extracting exhaust fumes from big trucks, contractor's machinery and cars with a turbo-charger, you have to use a high-temperature hose.
|
|
|
|
|
|
Lincoln’s Fluid Reel Series (LFR)
Lincoln's best value is exemplified in our LFR Series reels. Whether you need a low, medium or high-pressure rating, for grease, oil or air and water, Lincoln offers a standard reel to fit the application. For use with 30', 50', or 60’ hoses.
Heavy Duty Series
Our toughest, long-life reels, the HD Series provides reliable operation in the most demanding conditions. For use with 30', 40' or 50'; low, medium or high pressure hoses.
High Flow Series
These industrial strength hose reels are designed for applications that require high product flow and/or longer hose length. Models available to work with hose lengths up to 75'. Ideal for service trucks, transit facilities and large fleet shops. Fuel Reel Assemblies with super-duty reels in complete assemblies with hose and nozzle are also available.
Decorative Hose Reels
A streamlined appearance is only one benefit to decorative hose reels. Also consider they are dent and scratch resistant, non conductive, non-corrosive, and easy to maintain.
Dual Arm Series
This commercial strength hose reel is constructed to sustain repeated use in automotive environments and industrial settings. Double base support withstands extra vibrations and provides smooth hose pull-out and retraction.
Value Series Air Hose Reel
Are you searching for a long lasting air hose reel including a heavy-duty air hose at a great value? Our Value Series hose reel has many features you will find on Lincoln high quality hose reels.
|
|
N500
High Pressure Spring Rewind Reel
For Chassis Grease, Hydraulics, Air/Water
• Compact frame and narrow base.
• Non sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse winding.
• Standard inlet 90° swivel joint 1/4" female BSPT
threads. 3/8" female BSPT threads are optional and
must be specified.
• Standard outlet is 1/4" female BSPT threads. 3/8"
female BSPT threads are optional and must be specified.
• Standard pressure up to 689 bar, product temperatures
from -40° C to +121° C.
• Optional 1/4" 207 bar, or 3/8" 207 bar or 552 bar.
• 4-way roller assembly.
|
|
Professional Cable Reels
Drum made of highly unbreakable special plastic. Very strong, shock absorbent, plastic-coated double tubular frame. Ergonomic handle. Gib knob to tighten brake. Overheating protection by thermal switch. 4 socket outlets 2PE 16A/250V. Easy unreeling of the cable. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
Professional Hard Rubber Cable Reels
Drum made of vulcanized hard rubber material that meets the requirements of industrial and construction sites. Extremely unbreakable, oil-, fat- and gasoline resistant. Totally insulated, Light and impact proof. Shock absorbent plastic-coated double tubular frame. Ergonomic handle. Big tightening knob to block the drum. Overheating protection is given by thermal switch. 3 socket outlets 2PE 16A/250V, shock and splash proof.
|
|
AVX-100
Storage Reel
• Rugged steel and aluminum construction.
• Black, non-reflective matte finish.
• Durable tray provided for storage of stage
box units.
• Slotted divider disc design allows connector
pigtails to be safely stored alongside snake cable.
• Ergonomic carrying handle allows one or two
person transport.
• Adjustable friction brake to prevent cable overrun
during operations.
|
|
The Cavotec manufacturing plant in France is specialised in spring-driven hose and cable reels which are produced in a large range for a variety of applications.
They are used in service workshops, in garages and in industry in general.
They are supplied with standard hose or cables, these reels are made in painted steel, with drum mounted on two sealed ball bearings and rotating swivels in stainless steel and brass.
|
|
F1500
For Utility or Breathing Air Hose
• Choose permanent crank rewind or chain & sprocket
drive powered by an electric or compressed air motor.
• Spring actuated pinlock, adjustable cam-lock drag brake
on crank rewind models.
• 90° ball bearing swivel joint, 1/2'' female BSPT threads.
• Outlet 1/2'' female BSPT threads.
• Other sizes/threads can be furnished and must be
specified.
• Rollers and roller mounting brackets are accessory
items.
Specify roller position.
• Standard finish is oven-cured enamel. Polished stainless
steel discs and sprocket with chrome frame extra cost.
• F and FL1500 reels pressures to 207 bar.
• FH1500 reels pressures up to 414 bar.
• Temperatures from –7°C to +204°C.
|
|
Servic 8000:
Manual reel on cart (with handle, 4 wheels directional & brake), to add the letter R to the code.
|
|
Series 40 offers considerable strength in a lighter weight aluminum frame that is combined with stainless steel fasteners and powder coated flanges to offer the greatest amount of corrosion resistance and durability. It handles larger diameter hose and is nearly limitless with regaurds to fit and function. To view a listing of our standard models or request a qoute, please visit us on the web at www.reelcraft.com.
|
|
Automatic recall by spring, any type of application.
Delivered with 1m of pipe outside in addition to the race.
|
|
Reel with automatic recall by spring. Seal turning double high quality, guaranteed constant passage.
Structure epoxy covered steel. Hydraulic pipe special reel.
|
|
|
The ReelTek's unique hybrid design offers great strength and reliability at a lighter overall weight than conventional reels. It is designed to hold 1/4", 3/8", and 1/2" I.D. hose up to 50' in length. It is suitable for air/water, oil, and grease applications. Other features include: Composite glass-filled polymer spring case, lath pawl mounts on guide arm to eliminate "latch-out" at full extension, ribbed base and upright, multi-positional guide arm that adjusts to seven different positions, and field tested long-life swivel. For more information about the ReelTek Series or Reelcraft in general, please visit us on the web at www.reelcraft.com.
|
|
|
|
