|
|
|
|
|
|
Application
The reel exhaust extractors – type ALAN are designed for extraction the exhaust
fumes emitted by vehicle’s exhaust pipe during the engine tests, adjustment and
diagnostics. They are applied in bus depots, garages and car service stations.
At economic optimal air extraction and simple use it captures the whole exhaust vol-
ume and removes them outside. The reel can be mounted directly under the ceiling
or to the wall or to column by means of a bracket set.
Structure
The reel exhaust extractor consists of a winding reel with the exhaust hose with a nozzle to connect at the vehicle exhaust pipe. The nozzle sucks in the am-
bient air, mixes it with the exhaust fumes to decrease the temperature. Exhaust extractors are adapted for hoses of diameters , 100, 125 or 150 mm. In all versions, the free overhang of the hose (fully recoiled on the reel) is 1,5 to 2
m.
The devices are produced with two sorts of reel drive:
1. Type C – spring drive for hose reeling. The hose is wound down manually and reeled up automatically upon the force of a spring mechanism. To
the equipment belong following elements:
band brake – to slow down the hose speed during winding-up,
ratchet device – which locks the hose in the required position (while it is being wound down),
rubber stopper – to be fixed on the hose, stops the hose after it is fully wound up onto the reel.
2. Type E – with electrical drive for “hose wind-up / down”. Inside the reel is placed a gear-motor (of low rotational speed and small motor rate).
Both types can be equipped with a shut-off damper which automatically opens and closes during reeling/unreeling of the hose.
|
|
|
Coxreels T Series "Truck Mount" spring driven hose reels are the toughest hose reels in the spring driven line. The chassis is strongly supported by dual pedestal-style arms that span from the roller guide bracket down to the sturdy mounting base. Triple support point to the shaft are complimented by Coxreels' original Super Hub support system. They are perfect to be mounted on stationary units or service and utility vehicles. This Series was engineered for low, medium and high pressure including air, water, fuel, oil and grease applications. The models are available in 3/8", 1/2", 3/4" and 1" hose I.D and accomodate 50', 75 or 100' of hose. The working pressures are available in 300, 1250, 1500, 2500, 3000, 4000 and 5000 PSI according to the desired applications.
|
|
•Highest quality ‘finished edge’ Spring steel strip
• Full fl ow full DR brass swivels and fl uid paths
• Positive crimp hose fi ttings
• All position positive latching system
• Tough, impact, corrosion resistant and UV stabilized
Polypropylene with Anti static and fl ame retardants
• Unique ratchet tensioning system
• Heavy Duty wall mounting swivel system
• Replaceable protective mouth guard
• Large side covers for easy access in servicing and maintenance routines
• Food grade approved materials
• Unique service locking pin port for added safety
• Two part fully adjustable bumper
• Detailed operation and service manual
• Easy mount drill hole pattern supplied
|
|
Gen IV E - Electrical cord / cable reels
The perfect solution to ensuring cables and cords are stored safely when not in use. 240 VAC 10, 15 amp
Hose id (diameter): n/a
Hose length: cable length
Rewind Method: Spring driven
|
|
The Series 7000 incorporates contemporary engineering and manufacturing techniques to give trouble-free performance. Reels are all steel constructed and compact for applications with critical space requirements. Hose I.D.s range from ¼ to 3/4, with available lengths up to 70ft.
These Industrious reels feature: full flow shaft and swivel for maximum product delivery, individually powder coated components, reel springs manufactured from the highest quality scaleless blue tempered steel, and adjustable guide arms for floor, wall, or ceiling mount.
|
|
|
Coxreels PC Series spring driven power cord and light reels are heavy duty, industrial grade power sources. This ground-breaking design sets a new bar as the ideal cord management solution capable of fulfilling any commercial and industrial application. They replace tangled extension cors and self retract to increase safety, productivity, efficiency and can withstand the toughest of working conditions. These heavy duty, solid steel, powder coat painted time-savers are available in 16, 12, & 10 gauge cord in lengths up to 100 feet and features 6 different cord accessory options for every power and light management application.
|
|
- Spring cable- and hose reels -
Conductix-Wampfler spring cable reels provide the optimum solution for all hoisting and material-handling applications. Rugged, heavy-duty construction guarantees exceptional reliability under extreme operating conditions.
- Spring cable reels -
Spring cable reels are used for the automatic reeling of cables on various types of moving equipment. These include most hoisting and other material handling devices; e.g. portal cranes, grabs, magnets, lift and working platforms, machinery, excavators, mobile cranes, transfer cars, transport systems and skimmers in purifying plants.
- Spring hose reels -
Spring hose reels are used for the automatic reeling of hoses on various types of moving equipment. Mostly these machines are track-based and operate in a straight line. The orientation of these applications can be horizontal or vertical.
|
|
COXREELS® manufactures heavy duty industrial grade hose reels, cord reels and cable reels of the highest quality. Our leading, high quality, product line fulfills any conceivable application where a reel is needed. Coxreels’single pedestal style hose reels are designed to handle a wide range of applications such as air, water, oil and grease. These reels accommodate 1/4 inch I.D. hose up to 3/4 inch I.D. hose, and will hold lengths up to 100 feet on an automatic spring rewinding system. All reels are built of heavy gauge steel and have an adjustable guide arm to meet your specifications for a ceiling, wall, floor, or mobile installation. The standard latching device will hold any length of hose you need without any pull back tension.
Coxreels also features a safety line that will retract up to 80% slower than standard spring rewind reels.
|
|
- Narrow frame and compact mounting base.
- Non sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlets 90° balanced pressure swivel joints 1/2" female NPT
threads.
- Standard outlets 1/2" female NPT threads.
- Pressures to 3000 psi (207 bar)
- Temperatures from -60° F to +250° F (-51°C to +121°C).
- Consult factory for other pressures & temps.
- 4-way roller assembly. Specify roller position.
- Constant Tension is available – consult factory.
|
|
ReCoila® Gen III OA, OP, P and A series reels are an ideal compact solution for all gas welding, cutting and shielding gas hose applications. The Unique External Swivel design on the Oxygen and Fuel gas reels provides added safety and ease of O ring and seal replacement. When hoses are stored by wrapping them around the bottles or trolleys there is a greater potential of a fire risk. By installing a ReCoila® gas reel you not only create a safer working environment, but also
extend the hose life and gain productivity effi ciencies.
|
|
ATC Production offers a wide range of cable or motorized reels to electric, hydraulic, pneumatic and gas supply.
Our range has been studied to guarantee a long utilization even in difficult condition. Whether it is for horizontal and vertical utilization it covers all your industrial need.
Regarding the ATEX (94/9/CE) directive, we also offer a large range of reels.
|
|
|
|
|
|
Medical Grade Cable Reel (6.5" Case)
Retractable cable: 16/3 SJT gray jacket, w/gray molded hospital grade NEMA 5-15 male plug. Approx. 10 feet.
Fixed pigtail: 18/3 SJT gray jacket, w/gray molded female IEC plus. Approx. 18 inches.
UL 2601-1 & UL 355
Part No. D200911 (Black)
Medical Grade Cable Reel (6.5" Case)
Tremont cart replacement
Retractable cable: 16/3 SJT gray jacket, w/gray molded hospital grade NEMA 5-15 male plug. Approx. 10 feet.
Fixed pigtail: 18/3 SJT gray jacket, w/gray molded female IEC plus. Approx. 18 inches.
UL 2601-1 & UL 355
Part No. D200725 (White)
Electrical Cable Reel (6.5" Case)
Retractable cable: 16/3 SJEOW-A black jacket, w/black NEMA 5-15R triple female receptacle molded to cord. Approx. 10 feet
Fixed pigtail: 16/3 SJT black jacket, w/black NEMA 5-15R male plug. Approx. 18 inches.
Part No. D201155
Electrical Cable Reel (9.0" Case)
Retractable cable: 16/3 SJT black jacket, w/ NEMA 5-15 male plug. Approx. 30 feet
Fixed pigtail: 16/3 SJT black jacket, w/black NEMA 5-15 female receptacle Approx. 18 inches.
Part No. D201063
|
|
The L4000 and L5000 Electric Reels are designed to be compact, but are still capable of holding 35-50ft of tangle-free power cable. They are spring retractable with latch and engineered for industrial use. Compact for critical space requirements, these reels are finished with a durable abrasion resistant baked-on powder coat, keeping these reels looking new and maintenance free through years of use. All models supplied with cord are equipped with a 4-5ft. pigtail and three prong plug. Made with wall, ceiling, or bench mounts in mind, the L4000 and L5000 models also come standard with adjustable cord stop.Optional fluorescent lights, outlet receptacles, and incandescent hand lamps are available as options.
|
|
A wide range of spring-driven reels to be used for horizontal and vertical applications are available from Cavotec Alfo stock.
These reels are built with modular components which allow a great number of combinations able to cover most requirements.
The spring reels are strong and well designed in order to guarantee the highest reliability even in difficult applications.
All steel plates and parts are either hot-dip galvanised or have a polyester coating which guarantee a long life time.
|
|
The product range is completed by the following accessories:
Fluid couplings for high and low pressures
Electrical/fluid sliprings
Hoses, connectors
Electrical cable
|
|
|
VAHLE Spring Operated Cable Reels serve for automatic winding of flexible power and control cables, hoses for gases and liquids. Typical application: Portal- and Gantry Cranes, Dockside-Ships- and Construction Cranes, Graps and Magnets, Electric Hoists and other material handling equipment etc.
|
|
The Cavotec manufacturing plant in France is specialised in spring-driven hose and cable reels which are produced in a large range for a variety of applications.
They are used in service workshops, in garages and in industry in general.
They are supplied with standard hose or cables, these reels are made in painted steel, with drum mounted on two sealed ball bearings and rotating swivels in stainless steel and brass.
|
|
F1500
For Utility or Breathing Air Hose
• Choose permanent crank rewind or chain & sprocket
drive powered by an electric or compressed air motor.
• Spring actuated pinlock, adjustable cam-lock drag brake
on crank rewind models.
• 90° ball bearing swivel joint, 1/2'' female BSPT threads.
• Outlet 1/2'' female BSPT threads.
• Other sizes/threads can be furnished and must be
specified.
• Rollers and roller mounting brackets are accessory
items.
Specify roller position.
• Standard finish is oven-cured enamel. Polished stainless
steel discs and sprocket with chrome frame extra cost.
• F and FL1500 reels pressures to 207 bar.
• FH1500 reels pressures up to 414 bar.
• Temperatures from –7°C to +204°C.
|
|
|
For mobile food: hoist, grab, overhead crane, machine & cart mobiles, lifting beam, control on the ground, conveyer, mobile distribution...
|
|
|
The ReelTek's unique hybrid design offers great strength and reliability at a lighter overall weight than conventional reels. It is designed to hold 1/4", 3/8", and 1/2" I.D. hose up to 50' in length. It is suitable for air/water, oil, and grease applications. Other features include: Composite glass-filled polymer spring case, lath pawl mounts on guide arm to eliminate "latch-out" at full extension, ribbed base and upright, multi-positional guide arm that adjusts to seven different positions, and field tested long-life swivel. For more information about the ReelTek Series or Reelcraft in general, please visit us on the web at www.reelcraft.com.
|
|
|
|
|
|
An ample range of COILERS TO MEANS that cover any necessity with electrical feeding or, pneumatically or hydraulically to hand tools, or to prolong the life of cables, to assure the security the people and its conditions of work, until the feeding of industrial movable equipment of small and median power.
Our coilers to means are used for mechanical factories or movable automobiles, theaters, bridge-crane, porches, tables, arms and stairs by telescope, elevating elevators, cars, electromagnets, etc.
All the coilers are robust, made in steel plate and their means guarantee a functionality of up to 100,000 maneuvers.
We as much have models standard of coilers mounted with different cables in length, section and number of conductors who cover an ample range with the necessity of the client. We also provide to models of coilers to size with different cables or hoses based on each element to feed.
The power supplies can as much be of power or control, or compound since the equipped coiler this of collectors trained by modular elements, securing a great number of phases of transmission. When one is feedings of fluid the coiler is provided with a specific rotating meeting for each application, based on the own fluid, volume and pressure.
|
|
| ... products without technical information |
| |
 see the results for the following category : Brake units |
|
|
