|
|
Screw compressors for the refrigeration industry VMY, VARISCREW an VARISCREW+
oil-injected screw compressor stages in 3 types on construction of different design with a total of 20 sizes. Suction volume 233 m³/h - 9.900 m³/h
|
|
MSC 127 Hermetic Vertical Screw Compressors
Size Options 4 sizes
Horsepower 80 - 200 HP
Capacity 8 - 225 TR (28 - 791 kW)
Displacement 186 - 335 CFM
Refrigerants R22, R134a, R404A, R407C, R507 & other HFCs
Applications
Air Conditioning & Commercial Refrigeration
Ice skating rinks, Process ice production, Air-conditioning chillers for commercial buildings, Refrigeration chillers for refrigerated warehouses, Air-conditioning and Process chillers for military and passenger ships . . . and so much more.
|
|
Large Horizontal Open Drive Screw Compressors
Size Options 15 sizes
Horsepower 100 - 2,200 HP
Capacity 50 - 2,500 TR (176 - 8,785 kW)
Displacement 278 - 3,336 CFM
Refrigerants R22, R134a, R404A, R407C, R507, R717 (ammonia) & other HFCs
Applications
Air Conditioning, Refrigeration & Gas Liquidfication
Ice skating rinks, Process ice production, Air-conditioning chillers for commercial buildings, Ground support aircraft cooling systems, Landfill vapor recovery, Pharmaceutical and cryogenic labs and so much more.
|
|
The supply range of Grasso screw compressors comprises 30 types, subdivided into 4 series (SH, MC, LT and C) which differ from each other in the volume flow ranges and in the degree of integrating functional components of the package into the compressor housing. Further advantages for our customers are: patented rotor profile, gas pulsation protection, Vi-control in full and part load operation and a design to ensure easy maintenance.
Grasso now has one of the most extensive and comprehensive range of screw compressors (Grasso SC) providing uniform steps of capacity with 30 different sizes.
Grasso screw compressor packages are available in single (Grasso SP1) or two-stage (Grasso SP2) versions and as DuoPack executions (Grasso SPduo).
|
|
The supply range of Grasso screw compressors comprises 30 types, subdivided into 4 series (SH, MC, LT and C) which differ from each other in the volume flow ranges and in the degree of integrating functional components of the package into the compressor housing. Further advantages for our customers are: patented rotor profile, gas pulsation protection, Vi-control in full and part load operation and a design to ensure easy maintenance.
Grasso now has one of the most extensive and comprehensive range of screw compressors (Grasso SC) providing uniform steps of capacity with 30 different sizes.
Grasso screw compressor packages are available in single (Grasso SP1) or two-stage (Grasso SP2) versions and as DuoPack executions (Grasso SPduo).
|
|
| ... products without technical information |
| |
* Easily programmed
* Weld parameter monitoring
* Automatic self-compensation
* PC data interchange
* 63 weld schedules per outlet
* Closed loop control and feedback
* Alert and fault output displays
* Self diagnostics
* Robotic, fixed automation and manual systems available
|
|
Designed specifically for the insulation industry
The Pin Welders robust and reliable design has performed efficiently and reliably for many years under the stress of on-site and workshop conditions.
The unique chuck guard design has the following advantages:
1. No adjustment necessary for different length pins.
2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is eliminated therefore guaranteeing more consistent welding results
|
|
|
FEATURES: Plug in solid state circuitry. Continuous current control from 250 to 900 amps. Continuous time control from .05 to .7 seconds. Built in chuck saver. System comes complete with 8 meters earth cable and clamp, 15 meters weld and control cable and stud welding gun with legs and foot piece.
|
|
JUPITER 300i
Site generator with regulated and adjustable welding current, version inverter.
Welding of insulation attachment stud &0slash; 3 standard, mild steel, stainless steel, aluminium and bi metal.
|
|
Designed specifically for the insulation industry
The Pin Welders robust and reliable design has performed efficiently and reliably for many years under the stress of on-site and workshop conditions.
The unique chuck guard design has the following advantages:
1. No adjustment necessary for different length pins.
2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is eliminated therefore guaranteeing more consistent welding results.
|
|
The SGC 66 Percussion is a new generator which can weld is in
contact mode is in percussion mode.
It is the most compact generator and lightest in its category.
Managed by Microprocessor, it is equipped with a meter
of recording (counting of the number of weldings and time counting).
It is the ideal tool for all the weldings on stainless steel,
aluminum, brass, coppered mild steel, in the diameters m2 in M8, and
it finds its place in very many applications:
aeronautics, fine sheet-iron works, electric household appliances, articles domestic,
automotive engineering, cycles.
|
|
| ... products without technical information |
| |
|
|
|
|
Engine Specific Fuel Consumption Measure-ment To Check The Engine-Specifications And To Control Fuel Cost And Engine Adjustments Is Now Possible.
Engine-related fuel consumption measurement in multi-engine systems is now possible with the KRAL Volumeter®. The further development of the approved fuel consumption measurement for Diesel Engines offers now:
The high measuring accurancy of the overall system is only possible by the precision of the individual KRAL Volumeter®.
The connection to standard-bussystems such as modbus and CANbus.
Improved casings, electronic, cable and sensors.
Improved spindle bearings for more resistance against abrasive fuels.
A monitoring function for analysing maladjustments of the fuel system.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
Helical flow meters are positive displacement meters with a very favourable pressure drop behaviour. They are therefore perfectly suited for the flow measurement of very high viscosity fluids.
Thanks to wide measuring ranges, high accuracy and resolution helical flow meters are an excellent choice for laminating systems, painting systems, adhesive dispense systems, PUR systems as well as batching systems for various fluids.
|
|
KRAL Volumeter® offer laboratory measuring accuracy even under rough industrial conditions.
Pressure pulsation compensation
KRAL Volumeter® have constructive characteristics making them suitable for mechanical strain caused by strong pressure pulsation.
Identification and consideration of return flows
Beside the flow sensor, KRAL Volumeter® are delivered with an optional sensor for recognising the flow direction. Together with our Flow Management Unit BEM 4U even short-termed flow reversals are identified and correctly taken into account when calculating the measuring value.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
The helical screw flowmeter is a high precision meter giving excellent reliability. It is mainly used for viscous fluids but will also perform well on low viscosity fluids. The basic range of meters are in aluminium or grey cast iron and stainless steel models are available. Flow rates range from 0.1 l/min to 7,500 l/min.
Suitable for wide ranges of viscosity these meters provide high accuracey measurement (+/-0.1%) for fuel and oil flows particularly for automotive and aviation test rig applications.
|
|
The high-precision Volumeter from KRAL guarantees the precise maintaining of formulations, to achieve PUR products entirely free of any faults.
KRAL Volumeter® measure precise over a wide flow range, with high resolution and a low pressure loss. They be used successful in low pressure-PUR systems and closed-loop-regulations.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
|
|