|
|
A complete range of Climate control products is available ensuring the continued workings of your sensitive electronic components. From fans & filters to large Air-conditioners you can be assured ETA has the right product to keep your components cool!
The use of our Thermal software eliminates all the "guess work" previously undertaken: choosing the right cooling solution has never been easier!.
Features at a glance include:
- Wall-mounted and top mounting air-conditioners up-to 5200W
- Extra-flat wall mounted air conditioners (up to 2000W), air conditioners for suite
cabinets (up to 10000W)
- Air to air and air to water heat-exchangers
- Climate control doors in 4 different cooling capacities
- Top mount units ( roof mounting fans) "Click and fit" fans & filters available up-to
568 m3/h air-flow
- Stainless Steel versions available
- Heaters and thermostats available
|
|
|
New JET cabinet air conditioners by its design and facilty for installation is particularly inovative. From 0.4 to 4 KW its cover all needs of remoting heat on electrical panels
|
|
Cold Pump® Cooling Systems are thermostatically controlled, closed-loop air conditioners that use CFC-FREE R22 or HFC-134A refrigerants. Room air is continuously drawn through an external filter, across condenser coils (where it removes the heat drawn from the enclosure) and flows out the top external vent. The sealed enclosure remains clean and cool because internal air is cooled and dehumidified continuously as it is drawn across the evaporator coils.
Applications:
Vortec Cold Pumps are a reliable air conditioning system for electrical control panels and enclosures. These units, which maintain NEMA 12 ratings, are perfect for both new installations as well as retrofitting to cabinets already in place. Top and side mount models are available with cooling capacities ranging from 1800 to 6000 BTUH. Provides effective cooling protection for heat-sensitive electronics in numerous applications. |
|
Rittal system climate control offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions - with Rittal, everything is interconnected. Perfectly linked and controlled cooling technology with eco-friendly, energy-efficient equipment.
From passive air climate control to active liquid cooling of high-performance CPUs, Rittal offers the full range of components and systems. They are designed precisely according to your requirements and application spectrum. Software-assisted planning and calculation of requirements, together with modular, rack-compatible technology, help to minimise investment costs, thereby offering a particularly future-safe solution with a high degree of flexibility.
|
|
COMMON FEATURES
Specifically developed for mounting on the wall or door of
electronic enclosures, the air conditioners cover a cooling
capacity range from 330W to 4000W.
Common to all models is the “Selfcleaning” condenser coil which remove the necessity of the air filter, avoiding the ordinary maintenance.
Most models are equipped with Condensate Dissipator (from EVE11).
The standard control is electromechanical, and as option an electronic
one (EBB).
|
|
Cooling power : from 360 to 2500 W (L35/L35 according to DIN 3168).
To be fixed either on the front door or side panel or top panel of a cabinet.
Factory pre-set to achieve an average cabinet temperature of 35°C max.
Customer’s advantages :
- One single cut-out for cabinets from 850 to 2500 W.
- Powerless condensation evaporating device.
- Electronic control with alarms and safety values (high pressure, cabinet opened, cabinet temperature, fan and compressor’s thermal breakers).
- Ventilated hermetic compressor.
- Standard spare parts for all models. |
|
This range of rack air - conditioning units for 19-inch cabinets benefits from all our experience in this industrial field.
The depth of 560 mm allows racks of 600 mm to be integrated without any difficulty.
The electrical and refrigerating components of this rack range are the same as those used in vertical and horizontal air-conditioning units.
|
|
Magister 2
Spaces requiring a particularly high level of indoor air quality (filtration, controlled temperature and humidity). Designed for installation in the space to be air conditioned.
Available in 10 models and 2 versions:
- Under: Top return and downflow in raised floor,
- Over: Front return and top supply.
Cooling capacity: 12 to 90 kW
Air flow rates: 3,000 to 22,000 m³/h
- CW: single source, not self-contained, supplied with chilled water,
- TCW: dual source, chilled water and independent backup.
- Packaged unit,
- Double-skin panels with M0/A1 insulation, self-supporting casing (models up to 45 kW) or aluminium frame (models above 45 kW),
- Choice of G4 or F7 filter or G4+F7 filter,
- Cooling provided by a chilled-water coil fitted with two-way or three-way valve,
- Direct-expansion cooling coil, with AIRIAL C or EUROPA 2C built-in water-cooled condenser or separate air-cooled condenser,
- Plug fans with speed-controlled EC motor,
- Heating provided by hot-water coil or electric heater,
- Steam humidifier,
- Complete electrical cabinet, CIAT µAIRCONNECT or Carel electronic control,
- Many options.
|
|
- The original activated alumina solid core suction line filter dryer
- Designed for system clean-up.
- 500 hours salt spray protection.
- High capacity acid retention desiccants.
- Shortest system cut-out lengths allow installation in tight areas.
- Low pressure drop - highest effective filter area.
- Two access valves simplify pressure drop measurement.
- Solid copper sweat fittings.
|
|
- Solid copper connections
- "U" tube design for maximum flow of refrigerant and minimum oil entrapment.
- Inlet Flow Director guides refrigerant toward wall for smooth tangential flow and gradual expansion.
- "U" tube Entrance is positioned behind the Inlet Flow Director to prevent unwanted liquid refrigerant from entering and damaging compressor.
- Metering Orifice matched to system capacity assures optimum liquid refrigerant and oil flow back to compressor.
- Protective Screen and Orifice Assembly on U-Tube protects against foreign particles and contaminants affecting metering function.
- Fittings and "U" Tube are matched to accumulator holding capacity and total system charge for minimum pressure drop and maximum refrigerant flow.
- U.L. listed for 1775 psig minimum bursting pressure. File No. SA5172.
- Powder paint exterior coating surpasses 500 hour ASTM salt spray tests.
- Integral 430°F Fuse Plugs (U.L. File No. SA5441).
|
|
| ... products without technical information |
| |
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
- Designed mainly for commercial refrigeration and air conditioning applications
- Broad range of application in L/M/HBP
- Available for R 134a, R 12, R 502, R 22, R 404a, and R 407C refrigerants
- Rugged design
- Available for oil or fan cooling versions, high and low starting torque |
|
| For bus air-conditioning and transport refrigeration. Open special compressors in aluminium design with smallest dimensions. State-of-the-art high-speed machines with innovative design details. Unique product range with 2/4 and 6-cylinders. |
|
|
Hitachi offers both single & double skinned AHU that are modular in design and available in both horizontal and vertical configurations with a variety of discharge arrangements. These units may be arranged to meet almost any space or duct requirements and the standard capacity ranges from 27 - 63 Nominal tons. For special applications, we are able to custom-make the units according to your specific needs.
|
|
| The Parker Sahara Series Liquid Line Filter Dryer is the perfect replacement dryer for air conditioning applications (also appropriate for some refrigeration applications--consult Parker). Its ideal moisture removal and contaminant filtration properties make it the perfect service replacement for +40F to 55F suction line temperature R-22 air conditioning systems. |
|
- Specifically designed for recovery and recycling.
- Prevent costly damage by filtering contaminants out of the refrigerant before it enters the unit.
- UL Listed and CSA Certified.
- Maximizes removal of solid contaminants to include aluminum and iron particles, copper and iron oxides, metal chips, varnish, burrs, flux and dirt.
- Female connection on the PF-052MF has been extended to eliminate difficulties with valve handles and hose connections.
- Contact Parker for other available fittings.
|
|
Suction and blower hoses for temperatures from -20 °C up to +280 °C, DN 40 up to DN 900
Applications:
extraction af gaseous media: air conditioning and ventilation industry, suction plants, ventilation and suction, welding fume extraction (with increased spark concentration), tent heating, in areas with raised safety requirements, low pressure applications
Properties:
- highly flexible
- compressible
- small bend radius
- external steel helix protects against abrasion
Connecting elements:
- hose clamps
- hose connectors
- hose reducers
|
|
SANICLIM®, the gauranteed quality
One piece casing
- Panel facing : 2 GRP (Glass Reinforced Polyester) facings
- Insulation core : PUR or PIR foam (Thickness is defined according mechanical and temperature constraints)
Custom made casing: the answer to your specific dimension need
Hygienic design:
- Fully airtight casing, corrosion proof, no thermal bridges
- Smooth internal surfaces, rounded corners, no joints between panels and floor
- Technical floor built-in reverse slope and counterslope to facilitate casing cleaning and recovery of all the condensates
- Easy to clean: large inspection doors and hatches, insensitivity to chemical products...
Eco-designing: highly energy efficient, durability
Fully Airtight ductwork: connection between AHU and duct with GRP (Glass reinforced polyester) weld.
Applications: Food-processing, Biotechnology, Electronical and microelectronical, Hospitals, Pharmaceutical...
CERTIFICATES
Mechanical performance according to NF EN 1886
- Casing strength: 2A (D1)
- Casing air leakage: B (L1)
- Thermal transmittance: T1
- Thermal bridging: TB1
Fire rate
- M1 according to NFP 92-501
- Euroclasse B-s3,d0 according to NF EN 13501-1
Food safe coating: Approval n°9080136 from LNE |
|
AIRCONDITIONING DUCT
The ducts intended for the installations of airconditioning represent a practical and elegant fireproofed rigid PVC system making it possible to pose easily and very quickly the tubes of your new airconditioning.
The ducts can be fixed at the wall using screws plugged by using the drilling predisposed at the base.
A complete system of accessories is also available: junction, derivation and passage. All the accessories are assembled by clipsage.
The ducts are manufactured out of thermoplastic rigid, insulator and shock-proof. They can be used at temperatures going of -20° with +60°C. They dismountable without tool and are provided out of bars of 2m. They are only available in white RAL 9001. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
