|
|
|
|
|
|
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 27° to 32 °C. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1,5" knockout hole to keep electrical control panels cool, clean and protected.
When the going gets tough...
Using vortex tube technology, cold air is generated by the Vortex A/C from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it's perfect for harsh, dirty environments. In fact, the Vortex A/C features an optional "purge-air" port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C will provide reliable cooling operation in environments up to 79° C.
|
|
|
Vortex Coolers from ITW Vortec keep electrical cabinets and control panels cool, clean and protected. An affordable, maintenance-free alternative to air conditioners, the easy-to-install Coolers have no moving parts to wear out. Vortex Coolers incorporate vortex tube technology that uses filtered compressed air to produce a refrigerated air stream distributed throughout the enclosure. Unlike fans that pull in hot, dirty air, the enclosure Coolers maintain a light positive pressure inside the cabinet to effectively seal out the surrounding contamination, heat and humidity that can wreak havoc on sensitive electronic controls. Refrigerated air produced by the vortex tube enters the cabinet while hot air is expelled through a relief valve. Models are available to deliver up to 5000 BTUH of refrigeration. The UL-listed enclosure cooler systems are thermostatically controlled and are available in NEMA 12, 4 and 4X rated models.
|
|
Cabinet Enclosure Cooler - Frigid-X series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Cabinet Enclosure Cooler - Frigid-X series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
Cabinet Enclosure Cooler - Frigid-X series are ideal for all NEMA 12 and NEMA 4 rated panels.
Cabinet Enclosure Cooler - Frigid-X - Advantages:
- Low in cost
- Compact
- No CFC's
- Fast installation
- Stabilize enclosure temperature and humidity
- Virtually maintenance free (No Moving Parts)
- Mounts in a standard electrical knockout
- Stops heat damage and nuisance tripping
- Eliminates fans and filters
- Prevents dirt contamination by keeping enclosure at positive pressure
- Units applicable to all environments including high temperature to 200ºF
|
|
Let Braden Engineer a Superior Inlet System Designing a great air inlet is all about attention to acoustics and pressure drop. Our experienced staff of acoustical engineers employs the most modern software to provide compliant designs. Computational Fluid Dynamics (CFD) as well as Finite Element Analysis (FEA), 3-D Solid Modeling, and Thermal, Buckling and Vibration Frequency Analysis are applied to guarantee superior pressure drop, distribution and velocities.
Inlet System Components
• Inlet Plenum
• Inlet Silencers
• Inlet Dampers Doors (Roll Up)
• Inlet Ducting
• Inlet Expansion Joints
• Over 700 Inlet Systems Built
|
|
- Solid copper connections
- "U" tube design for maximum flow of refrigerant and minimum oil entrapment.
- Inlet Flow Director guides refrigerant toward wall for smooth tangential flow and gradual expansion.
- "U" tube Entrance is positioned behind the Inlet Flow Director to prevent unwanted liquid refrigerant from entering and damaging compressor.
- Metering Orifice matched to system capacity assures optimum liquid refrigerant and oil flow back to compressor.
- Protective Screen and Orifice Assembly on U-Tube protects against foreign particles and contaminants affecting metering function.
- Fittings and "U" Tube are matched to accumulator holding capacity and total system charge for minimum pressure drop and maximum refrigerant flow.
- U.L. listed for 1775 psig minimum bursting pressure. File No. SA5172.
- Powder paint exterior coating surpasses 500 hour ASTM salt spray tests.
- Integral 430°F Fuse Plugs (U.L. File No. SA5441).
|
|
The “BF” series liquid line bi-flow drier is designed specifically for heat pump or reverse cycle application. External check valves are not required since they are incorporated within the filter drier shell. The core design filters out contaminant particles down to 25 microns.
- Fully welded and furnace brazed construction.
- Bi-Directional flow and filtration for heat pump or reverse cycle applications. Internal check valves provide precise bi-directional control.
- Install in any position.
- 100% copper sweat or nickel plated flare fittings.
- Desiccant core provides reliable and effective removal of solid contaminants, acid and moisture. Core is cushioned in fiber gaskets to protect core and to insure trouble free performance.
- Powder coat paint gives maximum corrosion protection. Guaranteed 500 hour salt spray test.
- Same lay in dimensions as standard liquid line filter driers
|
|
Adjustable Spot Cooler - Frigid-X™ is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.
Adjustable Spot Cooler - Frigid-X™ temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30ºF to room temperature and can be easily set with a thermometer.
Adjustable Spot Cooler - Frigid-X™ comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).
Features:
- No moving parts or electricity
- Compact and lightweight
- Low cost
- Maintenance free
- Instant cold air
- Quiet
- Magnetic base
- Interchangeable generators
|
|
| ... products without technical information |
| |
Air Cooled Aftercoolers for Compressed Air
The compressed air discharged by an air compressor contains a considerable quantity of water in the form of vapor. If this is not removed, much of it will condense in the distribution system and cause expensive damage to all the equipment and processes which use the air. An efficient airblast aflercooler is an effective means of eliminating a significant proportion of the water contained in the compressed air. The new AF range of airblast aflercoolers is the result of a development program which builds on the worldwide success of the existing range for even greater efficiency, reliability and economy in operation.
|
|
• Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
|
Great volumes of airflow can be generated in very tight spaces due to the compact size of the Super Air Knife. Flow and force are easily controlled with a pressure regulator, allowing fast or gradual cooling. Shims can be installed if additional hard-hitting velocity is required.
|
|
• Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
|
Great volumes of airflow can be generated in very tight spaces due to the compact size of the Super Air Knife. Flow and force are easily controlled with a pressure regulator, allowing fast or gradual cooling. Shims can be installed if additional hard-hitting velocity is required.
|
|
Quality
- High reliability attained through the development of the dryers in the CDX range.
- First-class components that have been tested under the worst possible operating conditions.
- Constant dewpoint under any load condition.
- Automatic operation.
Savings
- High energy savings due to low pressure drops throughout the system.
- No wastage of compressed air because of the intelligent automatic discharge of condensate.
- A cleaner compressed air distribution network without leakage.
- Greater reliability and longer life of applications.
- Less maintenance and easier maintenance both due to the reliability of the components and the easy access to any internal component.
|
|
A. O. Smith is North America's leading independent supplier of hermetic motors for air conditioning and commercial refrigeration compressors. Quality A.O. Smith hermetic motors are used by many of the world's leading manufacturers of residential central air conditioners, commercial air conditioning equipment, commercial chillers, and heat pumps, as well as makers of walk-in coolers and refrigerated display cases.
From 5.5 inches to more than 15 inches in diameter and ranging in output from 1/2 to 500 horsepower, these precision rotor and stator units are engineered to withstand extremes in temperature, caustic and corrosive refrigerants and solvents, and deliver years of reliable service.
|
|
Compressors for refrigerators, freezers and light commercial applications such as bottle coolers and display counters are available for use with refrigerant R134a, R404A, R407c, R600a and R290, for 115V 60Hz and 230V 50HZ/60Hz.
|
|
Compressors for refrigerators, freezers and light commercial applications such as bottle coolers and display counters are available for use with refrigerant R134a, R404A, R407c, R600a and R290, for 115V 60Hz and 230V 50HZ/60Hz.
|
|
|
Speerall refrigeration scroll compressors are dedicated for low and medium temperature commercial refrigeration applications with refrigerants R404A & R507A. The compressors have rotolock connections and are available as single compressors. The Speerall compressors are suitable for parallel mounting (racks).
|
|
| ... products without technical information |
| |
ADAP-KOOL® refrigeration controls is a complete electronic system for monitoring, alarm handling and control of commercial and industrial refrigerating plants.
ADAP-KOOL® refrigeration controls consists of the following components:
• Controllers - EK series / AK series
• Monitoring units
• Electronically operated expansion valves
• Temperature sensors
• Pressure sensors
• Data communication
• PC software
The AKC controllers can be used with all refrigerants, and with a simple setting of the software they can be adapted to new refrigerants.
Remote monitoring makes it possible to assess whether alarms received, e.g. alarms during the night, require a prompt service call or may be postponed.
|
|
|
|
|
|
To meet changing market expectations, Heatcraft Europe (trade name FRIGA BOHN and HK Refrigeration) has introduced:
NEOSTAR, a new range of high-performance, air condenser units sub-divided into two distinct lines Silence and Power
Using state-of-the-art production methods, efficient and reliable components and a simple and practical selection tool*, the NEOSTAR range offers all the advantages you are looking for. Of course, as is the case for all heat-exchanger products proposed by Heatcraft, the performance ratings of the NEOSTAR range are certified by Eurovent in terms of noise level, power and energy consumption. For this reason, the NEOSTAR range has been accorded the "E-Solution" label.
• Energy efficiency
• Reduced size
• Ultra-silent version
• Fin efficiency
NEOSTAR Silence, a combination of efficiency and silence offering perfect integration in an urban environment (reduced noise level) as well as energy saving (low rotation speeds)
NEOSTAR Power, power at the service of performance
Equipped with a new fin type, NEOSTAR Power is both extremely compact and highly efficient.
|
|
Air cooled condensers :
• MA 3 > 14 kW
• WA 7 > 198 kW
• ECA 21 > 876 kW
• CHV 32 > 745 kW
Centrifugal fan condensers :
• CCT 4 > 138 kW
• CCM 41 > 532 kW
|
|
| ... products without technical information |
| |
|
|
|
|
The SC suction solenoid for commercial applications is an alternative low pressure drop shut-off valve in a wide range of both port and connection sizes. With cartridge (port) sizes available from 3/8" through 2-5/8", SC solenoids are capable of handling greater flow rates than other commercially available valves for suction applications in a non-flanged design. In addition, this unique design incorporates the same concept of cartridge interchangeability as found in Parker's popular (S)PORT evaporator pressure regulators.
This innovative design actually utilizes the same capacity cartridges (and valve bodies) as those used with the (S)PORT regulator series, as well as the same solenoid actuator, solenoid coil, and splicebox coil housing. Capacity cartridges can be changed by simply unscrewing the valve's four bonnet bolts in order to remove the adapter and cartridge assemblies. With this flexible line of solenoid now supplementing the existing line of (S)PORT regulators having these same characteristics, a single reliable source for all suction line components is now available.
This ductile iron-bodied solenoid valve with brazed copper couplings is suitable for most common refrigerants, certain oils and other fluids approved for use in refrigeration. This valve may be opened by means of a manual opening stem for servicing or in case of electrical power failure.
|
|
Solenoid Valves for refrigeration applications, standard types for fluorinated refrigerants and ammonia (R 717) as well as solenoid valves for water and brine.
The category also contains Solenoid Valves in stainless steel, Gas Powered Valves and Pulse Solenoid Valves.
|
|
Solenoid Valves for refrigeration applications, standard types for fluorinated refrigerants and ammonia (R 717) as well as solenoid valves for water and brine.
The category also contains Solenoid Valves in stainless steel, Gas Powered Valves and Pulse Solenoid Valves
|
|
Solenoid Valves for refrigeration applications, standard types for fluorinated refrigerants and ammonia (R 717) as well as solenoid valves for water and brine.
The category also contains Solenoid Valves in stainless steel, Gas Powered Valves and Pulse Solenoid Valves.
|
|
|
|