|
|
|
|
|
|
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 27° to 32 °C. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1,5" knockout hole to keep electrical control panels cool, clean and protected.
When the going gets tough...
Using vortex tube technology, cold air is generated by the Vortex A/C from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it's perfect for harsh, dirty environments. In fact, the Vortex A/C features an optional "purge-air" port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C will provide reliable cooling operation in environments up to 79° C.
|
|
Side installation coolers
* Powder coating similarly ral 7035
* Contact protection in accordance with DIN 31,001
* IP 24 to IP 54 (depending upon execution)
* Further technical details on inquiry
|
|
|
The thermoelectric units, with cooling power from 50W to 300W, represent an innovative solution for controlling temperature inside small enclosures or electronic equipment. They offer significant advantages: long life, easy installation, eco-friendliness, unaffected by vibration and capable of functioning when installed at any angle.
|
|
HXi™ Series Heat Exchanger
Our HXi™ Series air-to-air heat exchangers are designed primarily for cooling indoor and outdoor electronic enclosures. They use a double-sided impingement technology to significantly improve heat transfer performance while reducing heat exchanger size. Tests verify that the HXi™ heat exchanger is capable of dissipating twice the heat load of competitive heat exchangers at a comparable size.
Thermacore’s patented design makes the HXi™ Series a low-cost and high-performance alternative to conventional heat exchanger technologies. There are fewer moving parts for greater overall reliability. Standard units are available with 2, 4, 6 or 8 fans. Custom optional features such as alarms and temperature controls are also available. Units are UL recognized and meet Bellcore GR-487-CORE, NEMA 4 and NEMA 12 requirements.
|
|
cooling units
determining the cooling unit using charts
In order to select the unit best suited to your requirement, the values of three parameters are required: maximum ambient temlperature in the area where the switchboard is installed Te (max), the maximum temperature required in the enclosure Ts (max) and the amount of heat to be removed by the unit (Psyst.). Use the selection chart related to the reference temperature Ts which is closest to the required value. Read the Te value on the horizontal axis of the chart and draw a vertical line through this point. The intersections of this straight line and the power curves of the various units give the power that each unit can absorb in these
temperature conditions. Select a cooling unit with a power rating
immediately above the the Psyst. value to be removed.
|
|
|
The Peltier effect is a thermoelectric effect, named after the French physicist Jean Peltier. Respectively doped (n-type and p-type) semiconductor materials are used, which are alternately connected in series, each at two junctions. An electric current flowing through that system causes a change in the energy level of charge carriers, thus providing heat being absorbed at one junction and being evolved at the other.
|
|
| ... products without technical information |
| |
|
|
|
|
Fast positioning with high resolution.
Pollux is a very compact motion control system
preferential used in high precision positioning
applications.
The very smooth running characteristic is one of the
outstanding feature of this system.
Test it´s optimized cost/performance ratio.
Features:
· positioning resolution up to 600.000 Steps/rev.
· motor driver integrated
· use of physical units (mm/s; mm/s²)
· smallest calculated step size = 1nm
· dynamic speed and acceleration range
- 0.1µm to 40mm/s with spindle pitch=1mm
- 1mm/² to 20m/s²
· holding torque up to 10Nm (with gear)
· positioning commands with abs. or relative coordinates
- or velocity and direction
· programmable move to the limits
· 1Vpp high res. Closed Loop Interface
· optimized motor power consumption
· daisy chain capability, up to 16 devices
· RS-232 interface
· CAN-Bus interface
· ASCII command language (Venus-2)
· Box version available:Controller and motor separately
· rugged connector version available (Pollux industrial)
· plug and play capability
|
|
|
|
|
|
The Modec standard box van is constructed using built aluminium framed GRP side panels, a one piece GRP oulded roof and fully integrated aluminium base frame and floor. This includes hinged near and offside entry doors, a stainless steel rear frame with a wide latch-lokable shutter, plus grab handles on each rear pillar.
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
|
|
|
|
Modec is a revolutionary zero emission commercial vehicule. Economically and envoronmentally viable, the vehicule is purpose built from the ground up.
The modec is perfect for the demanding urban environment. With a 5,5 tonne GVW, this silent truck is capable of travelling at a swift 50mph over, a range of up to 100 miles or 60 miles.
The Modec Chassis Cab has been designed with the built in strength and flexibility that makes it suitable for a wide range of applications and conversions
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
MEGA Multitruck Van, diesel or electric, perfect in urban and rural zones as well as in closed sites
With its 3m3 capacity the Mega Van is the ideal partner for your transport solutions in urban and rural zones as well as in closed sites.
Available in combustion engine or electric versions the MEGA Van represents a very economical choice in terms of initial investment and running costs.
ergonomically designed, the MEGA Van has a very spacious cab, a low loading height (approx. 38cm) that make light work of all loading and unloading operations.
Highly manouevrable the Mega Van is ideal for going in and out of city centres and for parking
|
|
MEGA Multitruck Chassis Cab, with advantageous body build dimensions!
The choice is yours. Front wheel drive, aluminium chassis, with advantageous body build
dimensions, you have at your disposal the best tools to build your MEGA Multitruck.
Whether it be on a Chassis base or a Pick up you are able to create your own build according
to your transport needs. You can decide between a combustion engine or an electric motor
depending on the environment and your travel plans. In the Pick up version the loading volume can be as much as 3m3.
The MEGA Chassis Cab or Pick up: your imagination has no limits
|
|
|
|
|
|
Hardigg Rackmount Cases are world renowned as the toughest, smartest transport systems available for commercial, industrial and military shippers. Nothing protects better than Hardigg Cases when it comes to electronics. From the ultimate protection of a Classic Rack, to the removable rack option offered by SuperMAC, to the smaller footprint MAC Rack and ProRack – Hardigg has the solution to fit your exact shipping and protection requirements. All Hardigg Rackmount Cases boast rugged rotomoulded exterior shells that withstand all kinds of abuse, drops, in every environment.
"BlackBox™Rackmount Cases are lightweight, compact, offer light to medium duty protection and boast significantly better light duty shock performance than the competition. The use of recycled materials in the shell and a sturdy steel frame offer great value while upholding Hardigg’s industry-leading standards. When you need to be cost-conscious but can’t sacrifice performance, BlackBox is the answer.
* 24” (61 cm) Rugged steel rack frame with 10-32 threads designed to
meet ANSI/EIA 310-C
* Rack designed for applications up to 100 lbs (45 kg)
* Shock mounts provide 2” (5.1cm) of sway space to isolate equipment
* 2” (5.1cm) lid and 5” (12.7cm) lid with edge casters"
"FEATURES:
• Engineered racks provide a secure and mobile electronics enclosure
• 2 wheels
• Lightweight and compact
• Shock-mounts
• Shock mounts provide 2” (5.1cm) of sway space to isolate equipment
• Moulded-in rib design provides secure stacking and interlock
• Patented wide-design Comfort grip handles™ make lifting easy
• Black hardware is long-lasting and fastens securely
• Automatic pressure relief valve
• Airtight and watertight"
|
|
| ... products without technical information |
| |
RKVM-1708
17" TFT LCD 1U Rackmount KVM Switch 8 Ports
Features:
17" TFT LCD 1280 x 1024
Built-in A/D Board
Support 8 Ports KVM Switch
Membrane keyboard in 104 keys, with touch pad
Auto scan mode for monitoring PCs
Built-in rail self-locking device
RoHS ComplianceR=
|
|
Feature :
- 17” TFT LCD 1280 x 1024
- Built-in A/D Board
- Built-in OSD Button
- Support D-SUB and DVI-I Input
- The depth of chassis would be 515mm
- RoHS ComplianceT
|
|
Elo's iTouch touch-on-tube chassis CRTs are the right choice for your kiosk because they are durable, reliable, sealed, and deliver the ultimate in picture quality.
Typical desktop monitor designs can change without notice every 12 to 18 months, creating havoc for the design and service of kiosks and other enclosed applications. Elo's kiosk CRTs reduce or eliminate the need for redesign by providing a much longer model life than plastic case CRTs. At the same time, they provide the reliability and ruggedness required for operation in a public environment.
Featuring Elo's breakthrough iTouch touch-on-tube technology and no overlay to break, your kiosk will have the best picture quality and vandal resistance possible on a touch CRT. A final benefit is the watertight sealed bezel that adapts the curvature of the CRT face to a flat cabinet front.
|
|
Elo's chassis LCD monitors have a long-lasting product cycle because the enclosure is controlled by Elo's specifications. Future panel improvements are therefore possible without external changes. The monitors are available with multiple touch technologies and all feature a unique, injection-molded minibezel and watertight seal, plus a multitude of mounting options.
Features include:
·Analog and digital (DVI-D) video inputs
·Long lasting product cycle—enclosure controlled by Elo specifications
·Panel upgrades possible to the model in the future without external changes
·Integrated precision minibezel with watertight 0.5 mm seal
·Multiple mounting options including rear-mount, VESA mount, and front/panel-mount bezels or 19" rack-mount bezel
·Serial or USB touch interface
·Multilingual remote on-screen display (OSD)
·Worldwide agency approvals
·3-D electronic design files available
|
|
RKVM-1708
17" TFT LCD 1U Rackmount KVM Switch 8 Ports
Features:
17" TFT LCD 1280 x 1024
Built-in A/D Board
Support 8 Ports KVM Switch
Membrane keyboard in 104 keys, with touch pad
Auto scan mode for monitoring PCs
Built-in rail self-locking device
RoHS ComplianceR=
|
|
- 15" TFT LCD 1024 x 768
- Built-in A/D Board
- Membrane keyboard in 104 Keys, with touch pad
- Built-in rail self-locking device
- 1 Port
- Dimensions 484(W) x 44(H) x 470(D)
|
|
| ... products without technical information |
| |
DC braking with one-way rectification
suitable for all asynchronous motors and for mono phase motors
controlled by microcontroller
easy mounting, also for retrofitting into existing plants
wear-resistant and maintenance-free
integrated braking contactor
printed circuit-board version with fault signalling contact
for snap-on mounting onto 35mm DIN rail
degree of protection: case version IP 20, printed circuit-board version (LP) IP 00
meets trade assoc. requirements for category 2 acc. to EN 954-1 according to the test principles of woodworking machines GS-HO-01 and is already certified
|
|
|
|
|
|
The Winchester Rack and Panel product line is one of the most comprehensive pin and socket style connector systems available for cable-to-cable, cable-to-panel, and cable-to-board applications. The extreme versatility of Winchester's Rack and Panel line allows this connector system to be used in a wide variety of industries including industrial, military, aerospace, instrumentation, and telecommunications.
The Rack and Panel product line consists of molded insulators, screw-machined contacts, anodized aluminum hoods and protective shells, and a wide assortment of mating hardware. Other important features of the Rack and Panel product line include:
- Insulators available in a wide range of position sizes depending upon the product series.
- Solder cup, crimp, and dip solder PCB contacts available in pin diameters of .062, .040, .030, and .025 inches with current ratings of 13, 7.5, 5 and 3 Amps.
- Contacts pre-loaded into insulators or sold separately.
- Top or side opening cable hoods for applications requiring 180- or 90-degree cable exit.
- Male plug and female receptacle protective shells help to protect connector interfaces during handling as well as to provide polarization to ensure connectors are mated correctly.
- Wide assortment of mating hardware and accessories including fixed and turnable jackscrews and sockets, guide pins and sockets, mounting plates, and gaskets.
|
|
| ... products without technical information |
| |
|
|
