|
|
A complete range of Climate control products is available ensuring the continued workings of your sensitive electronic components. From fans & filters to large Air-conditioners you can be assured ETA has the right product to keep your components cool!
The use of our Thermal software eliminates all the "guess work" previously undertaken: choosing the right cooling solution has never been easier!.
Features at a glance include:
- Wall-mounted and top mounting air-conditioners up-to 5200W
- Extra-flat wall mounted air conditioners (up to 2000W), air conditioners for suite
cabinets (up to 10000W)
- Air to air and air to water heat-exchangers
- Climate control doors in 4 different cooling capacities
- Top mount units ( roof mounting fans) "Click and fit" fans & filters available up-to
568 m3/h air-flow
- Stainless Steel versions available
- Heaters and thermostats available
|
|
|
New JET cabinet air conditioners by its design and facilty for installation is particularly inovative. From 0.4 to 4 KW its cover all needs of remoting heat on electrical panels
|
|
Cold Pump® Cooling Systems are thermostatically controlled, closed-loop air conditioners that use CFC-FREE R22 or HFC-134A refrigerants. Room air is continuously drawn through an external filter, across condenser coils (where it removes the heat drawn from the enclosure) and flows out the top external vent. The sealed enclosure remains clean and cool because internal air is cooled and dehumidified continuously as it is drawn across the evaporator coils.
Applications:
Vortec Cold Pumps are a reliable air conditioning system for electrical control panels and enclosures. These units, which maintain NEMA 12 ratings, are perfect for both new installations as well as retrofitting to cabinets already in place. Top and side mount models are available with cooling capacities ranging from 1800 to 6000 BTUH. Provides effective cooling protection for heat-sensitive electronics in numerous applications.
|
|
Rittal system climate control offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions - with Rittal, everything is interconnected. Perfectly linked and controlled cooling technology with eco-friendly, energy-efficient equipment.
From passive air climate control to active liquid cooling of high-performance CPUs, Rittal offers the full range of components and systems. They are designed precisely according to your requirements and application spectrum. Software-assisted planning and calculation of requirements, together with modular, rack-compatible technology, help to minimise investment costs, thereby offering a particularly future-safe solution with a high degree of flexibility.
|
|
COMMON FEATURES
Specifically developed for mounting on the wall or door of
electronic enclosures, the air conditioners cover a cooling
capacity range from 330W to 4000W.
Common to all models is the “Selfcleaning” condenser coil which remove the necessity of the air filter, avoiding the ordinary maintenance.
Most models are equipped with Condensate Dissipator (from EVE11).
The standard control is electromechanical, and as option an electronic
one (EBB).
|
|
Cooling power : from 360 to 2500 W (L35/L35 according to DIN 3168).
To be fixed either on the front door or side panel or top panel of a cabinet.
Factory pre-set to achieve an average cabinet temperature of 35°C max.
Customer’s advantages :
- One single cut-out for cabinets from 850 to 2500 W.
- Powerless condensation evaporating device.
- Electronic control with alarms and safety values (high pressure, cabinet opened, cabinet temperature, fan and compressor’s thermal breakers).
- Ventilated hermetic compressor.
- Standard spare parts for all models.
|
|
This range of rack air - conditioning units for 19-inch cabinets benefits from all our experience in this industrial field.
The depth of 560 mm allows racks of 600 mm to be integrated without any difficulty.
The electrical and refrigerating components of this rack range are the same as those used in vertical and horizontal air-conditioning units.
|
|
Magister 2
Spaces requiring a particularly high level of indoor air quality (filtration, controlled temperature and humidity). Designed for installation in the space to be air conditioned.
Available in 10 models and 2 versions:
- Under: Top return and downflow in raised floor,
- Over: Front return and top supply.
Cooling capacity: 12 to 90 kW
Air flow rates: 3,000 to 22,000 m³/h
- CW: single source, not self-contained, supplied with chilled water,
- TCW: dual source, chilled water and independent backup.
- Packaged unit,
- Double-skin panels with M0/A1 insulation, self-supporting casing (models up to 45 kW) or aluminium frame (models above 45 kW),
- Choice of G4 or F7 filter or G4+F7 filter,
- Cooling provided by a chilled-water coil fitted with two-way or three-way valve,
- Direct-expansion cooling coil, with AIRIAL C or EUROPA 2C built-in water-cooled condenser or separate air-cooled condenser,
- Plug fans with speed-controlled EC motor,
- Heating provided by hot-water coil or electric heater,
- Steam humidifier,
- Complete electrical cabinet, CIAT µAIRCONNECT or Carel electronic control,
- Many options.
|
|
|
The thermoelectric units, with cooling power from 50W to 300W, represent an innovative solution for controlling temperature inside small enclosures or electronic equipment. They offer significant advantages: long life, easy installation, eco-friendliness, unaffected by vibration and capable of functioning when installed at any angle.
|
|
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 27° to 32 °C. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1,5" knockout hole to keep electrical control panels cool, clean and protected.
When the going gets tough...
Using vortex tube technology, cold air is generated by the Vortex A/C from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it's perfect for harsh, dirty environments. In fact, the Vortex A/C features an optional "purge-air" port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C will provide reliable cooling operation in environments up to 79° C.
|
|
|
Vortex Coolers from ITW Vortec keep electrical cabinets and control panels cool, clean and protected. An affordable, maintenance-free alternative to air conditioners, the easy-to-install Coolers have no moving parts to wear out. Vortex Coolers incorporate vortex tube technology that uses filtered compressed air to produce a refrigerated air stream distributed throughout the enclosure. Unlike fans that pull in hot, dirty air, the enclosure Coolers maintain a light positive pressure inside the cabinet to effectively seal out the surrounding contamination, heat and humidity that can wreak havoc on sensitive electronic controls. Refrigerated air produced by the vortex tube enters the cabinet while hot air is expelled through a relief valve. Models are available to deliver up to 5000 BTUH of refrigeration. The UL-listed enclosure cooler systems are thermostatically controlled and are available in NEMA 12, 4 and 4X rated models.
|
|
Cabinet Coolers - Frigid-X™ series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Cabinet Coolers - Frigid-X™ series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
Cabinet Coolers - Frigid-X™ series are ideal for all NEMA 12 and NEMA 4 rated panels.
Advantages:
- Low in cost
- Compact
- No CFC's
- Fast installation
- Stabilize enclosure temperature and humidity
- Virtually maintenance free (No Moving Parts)
- Mounts in a standard electrical knockout
- Stops heat damage and nuisance tripping
- Eliminates fans and filters
- Prevents dirt contamination by keeping enclosure at positive pressure
- Units applicable to all environments including high temperature to 200ºF
|
|
Switchgear cabinet coolers on Peltierbasis
Type: Kp
Tensions: 24V DC
Achievements: 30W - 300W
Enclosure IP 20
Operating temperature: -10 - +60°C
Aluminum corpus with stainless steel housing
|
|
. Completely dismountable modular cold storage cabinet with standard net volumes of 1400, 2800 and 4100lt.
. Constructed with 80mm thick panels injected with polyurethane and designed for easier and quicker mounting.
. Available for both positive and negative storage temperatures.
. Tray holder, storage grill or glass door options
|
|
Husky Industrial Refrigerator/Freezer
Insulated with three inches of urethane foam in sidewalls, doors, floor, and roof.
No assembly required. Simply set in place and hook up to power supply.
Custom units available.
Options include outdoor construction and spill containment pan.
Rugged, heavy-duty all-steel construction allows for use anywhere in the plant. Also available in galvanized and stainless steel.
Portable. Forklift pockets provided.
Temperatures may be thermostatically controlled to 350°F.
Freezer models available
Features:
Constructed with prefabricated modular panels. Designed for accurate assembly and future expansion.
Panels are formed by two shaped metal sheets, separated by and bonded to foamed-in-place urethane.
4" thick, Class 1, rigid, foamed-in-place, non-CFC urethane insulation. "R" value of 29.0
Exterior and interior surface of standard ceiling and sidewall panels is 26-gauge, embossed galvanized steel; standard floor surface is 14-gauge, bright galvanized steel. Floor sections will withstand uniformly distributed floor loads up to 600 pounds per square foot. Custom finishes are available.
Cam-Action locking fasteners for maximum locking efficiency.
Standard doors are 36" x 78" flush mounted, in-fitting with 4" thick foamed-in-place urethane insulation.
A complete set of installation instructions and assembly drawings are included with each other.
NSF and UL listed.
|
|
| ... products without technical information |
| |
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load.
|
|
These presses are suitable when constant precision and force are required throughout the entire stroke of the pin.
They are used for the Assembly of bushings and bearings, deformation of sheets, assembling, etc.
|
|
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
DIRECT ACTING PRESSES
Rack-and-pinion presses with round ram
APZ series
mäder rack-and-pinion presses transmit their pressing
force constantly over the entire length of the stroke.
Direct power transmission via the hand lever permits
extreme precision in the pressing operation.
The improved transmission ratio enables a higher compression
force to be achieved for the same force
applied.
The following quality features are characteristic of all
mäder rack-and-pinion presses:
- anti-twist ram
- infinitely adjustable stroke length:
Standard: via setting screw
MICRO: via micrometer screw
- Height adjustment of the press head using
a threaded spindle
- 360° infinitely adjustable hand lever
- adjustable return stroke power
Rack-and-pinion presses are therefore ideal for:
- pressing-in longer components and for
- jointing operations over long strokes
|
|
... see all the products in the category
Presses
|
|
|
see the results for the following category
