- Electricity - Electronics >
- Switch and Relay >
- Relay module
Relay modules
Load current: 8 A
Load voltage: 30, 240 V
... 8Amp, SPDT Relay, USB Relay Controller Board 4 SPDT Power Relays USB Powered & Controlled IA-3000 Software Compatible Software Utility and Sample DIN-Rail mounting ability Wall ...
Intelligent-Appliance
Load current: 8 A
Load voltage: 24, 115, 230 V
• Multi-input (Alarm) Relay module – Re-triggerable with 10 inputs • Separate relays for audible and visual alarm • Any input will energise output relays • Expandable ...
Load current: 21.8 mA
Load voltage: 24 V
Relay modules are mainly small electromagnetic relays, supplemented with power relays, terminal-type module interface devices with instruction and protection ...
Load current: 1.4 A
Load voltage: 250 V
The NC95 safety control unit is a manual reset module, based on the use of guided contact safety relays.
WIDE Automation
Load current: 1 A - 100 A
Load voltage: 690 V
Meba relay switch C3RU1136 are suitable for overload and phase-failure protection of AC motors with frequency of 50 or 60Hz, voltage up to 690v, current up to 0.1-100A under 8-hours duty or uninterrupted duty. Utilization ...
Load current: 2 A
Ultra high density relay board Lynx10.000 is an ultra high density relay multiplexing board. It is a customer specific design for automotive electronic board validations. It has the capability to switch ...
Load current: 0.1 A - 80 A
Load voltage: 0 V - 660 V
1.Application JRS1 series thermal relay is suitable for using in the circuits rated voltage up to 660V, ratedcurrent 80A, AC 50/60Hz, for over-current protection of AC motor. The relay has the differentialmechanism ...
Andeli Group Company
Load current: 3 A - 5 A
Load voltage: 250 V
8 zone 24V MODULE + PUMP OUTPUT + BOILER INTERLOCK The DLP 841 2 is a relay module of 8 zone 24V module for activation of electro-thermal actuators or other types ...
Seitron SpA
Load current: 10, 5 A
Load voltage: 24, 12 V
GENERAL SPESIFICATIONS Battery Low Voltage Disconnect Relay Protects battery from deep discharges and prolongs battery lifetime 12V / 24V and 5A / 10A models Led indicator for relay status On / Off ...
Load current: 10 A
Load voltage: 6 V - 240 V
... WERNER Relay Modules provide high density packaging of miniature general purpose relays, Double Pole Double Throw (2 FormC) contact configurations and low current AC and DC coils. Highlights: •Bright ...
Werner Electric GmbH
Load current: 38 A
Load voltage: 690 V
Ex mark:ExⅡ2G ExdeⅡC Gb Intended use:Can be used in zone 1,zone 2,zone21,zone22 Ambient temperature use:-40℃≤Ta≤70℃ Rater voltage:690V Rated current:38A Setting range of over loda trip:38A On-off capacity:18.5kW Coil voltage:440V Rated ...
Connectwell Industries
Load current: 4, 2 A
Load voltage: 24, 230, 110 V
• Master control module • 24Vdc/110Vac/230Vac • LED diagnostics • Dual Channel Output • Automatic/manual-monitored reset The FM1 is the master control module for each F Series safety system. ...
Load current: 10 mA
... transfer, Pepperl+Fuchs is setting a new level of reliability with newly developed safety relays. With triple redundant switching contacts, the interface module from the tried-and-tested K-System provides ...
Load voltage: 24 V - 240 V
19'' rack-mounted relay card for signal coupling. Features & Benefits: Controlled by 24 V DC/AC, 110/120 V AC or 220/240 V AC With 4 independent relays
Load current: 5 A
Load voltage: 24, 30 V
G9SE-family offers compact units for E-Stop, door and safety monitoring applications . Modules with two or four safety contacts and OFF-delay timing are available on slim-size housing. Simple front side wiring ...
Load current: 16 A
Load voltage: 250 V
This DINrail mounted relays module may be used as interface for any I/O board up to max 8 relay outputs with NO and NC contact (code RLE24-8-CLP) or with common signal ...
The SWITCH channel relay KR 461 is an additional functional unit that can be controlled by MOBALine. This relay unit with signaling and switching circuits is installed on a decentralized basis right on ...
SABEC brake boosters cover the need of electromechanical brake activators in direct current motors. Boost and non-boost versions are available, working in quarter-wave, half-wave and full-wave. Installation on DIN EN60715/50022 rail Lower ...
SABEC brake boosters cover the need of electromechanical brake activators in direct current motors. Boost and non-boost versions are available, working in quarter-wave, half-wave and full-wave. Installation on DIN EN60715/50022 rail Lower ...
Load current: 4 mA - 20 mA
8 relay module for line switching or general applications. Supplied with adapter for DIN rail mounting.
... as clones of the module line relays. Or in Combined mode, for example up to 4 modules associated to detectors+1 in mirror mode. This module has four maneouvre ...
Load current: 0 A - 0.1 A
Load voltage: 0 V - 30 V
The PCH Relay Box adds 12 failsafe relays to the PCH 1420 vibration monitor. The additional relays can be used to indicate various vibration and process alarms. The PCH Relay ...
Load current: 1, 2.4, 0.5, 0.3 A
Load voltage: 240, 230, 200, 100, 115 V
... contacts are available - Universal output relay capability. Enables direct control over a wide range from TTL electronic level to large magnetic contactors or DC solenoid valves. - Requires no output relay ...
Load current: 6 A
Load voltage: 24 V
WINSYSTEMS’ industrial ISM-TRM-RELAY provides 16 independent relays that are Single Pole Double Throw (SPDT) Form C devices. The contacts can handle 6A @ 250VAC /24VDC for applications requiring medium ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining