|
|
The Light series pushbutton handsets are distinguished by their low weight (420g including battery) and their small dimensions (185x80x43mm.). Much emphasis has been placed on the operator comfort in high-usage applications - the transmitter's weight distribution, key and clip systems are all ergonomically designed. The system uses light weight Ni-Mh rechargeable batteries, which power the transmitter for up to 12 continuous hours and recharge in 4 hours in an intelligent charger. Each system is supplied complete with 2 batteries and a charger. The system is fail-safe to Category 3 of EN 954-1 for Stop.
|
|
I-syon, smaller, lighter and more versatile: these characteristics sum up the I-syon range, which completes and reinforces Ikusi’s catalogue of remote-control units. The company can now offer a full range of remote controls capable of meeting the needs of the many different markets in which it operates currently and
plans to operate in the future.
The I-syon range which Ikusi is now launching on the market is the result of an intense process of development that has led to major innovations in software, hardware and mechanical design. |
|
In order to answer the requirements related to the use of equipment in potentially explosive atmospheres, JAY Electronique has developed a new series of ex-proof radio remote controls : the XD series, that can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust) explosive atmospheres.
Typical applications :
- industrial equipment
- industrial vehicles
- industrial hoisting devices
Industrial sectors :
- chemistry
- petrochemistry
- pharmacy
- metallurgy
- sugar and cereal industry
Protection mode : Transmitters : intrinsic safety
Receivers : Ex-proof + intrinsic safety
Products complying with the European Directive ATEX Manufacturer 94/9/CE – LCIE certificate
|
|
| T50-Cheetah GSM1 transmits via the mobile phone network, which means that it has a largely unlimited range. It can be used advantageously for applications where there is a requirement for longer range, e.g. to control heating and lighting, alarms indicating faults, to mention a few. It supports the EGSM 900, DCS 1800 and PCS 1900 mobile networks, i.e. triple band. GSM1 communicates with a mobile phone either via a telephone call or via a coded text message. |
|
The MJ joystick controller allows the operator freedom not possible with pendant cables or fixed control panels. Versions are available with 14 to 20 channels (not including START and STOP). The transmitter may be fitted with 2 or 3 Joysticks plus toggle switches, or toggle switches only. A Data Feedback option is also available.
|
|
PRO-M
The PRO-M is a fully-proportional controller optimized for use on mobile machines. The receiver is extremely compact to fit into the limited space available on vehicles. The wide-range power supply suits either 12V or 24V vehicles, and copes easily with the harsh electrical conditions encountered. The transmitter may be fitted with up to 3 dual-axis joysticks, or 6 single-axis paddles as well as up to 12 discrete commands. The proportional outputs may directly drive either voltage or current-controlled valves, and are programmed from the transmitter using a sophisticated teach-in mechanism that can be disabled to prevent tampering.
PRO-M + KSI
The PRO-M controller may be retrofitted to machines without electro-valves with the use of the KSI control kit. The kit comprises a small self-contained hydraulic system comprising a pump, tank, filter, and proportional actuators. These small actuators connect to the control shafts of the main machine valves, and allow fully-proportional control without the cost and complexity of upgrading the main hydraulic controls.
|
|
The controls are the units used when you want the LINAK system to perform a movement. They determine whether the control box make the actuator move in or out. There are more variants of LINAK controls such as handsets, Foot Switches, Desk Panels and attendant control panels.
All the handsets are available in both black and grey.
|
|
The UM series provides solutions adapted to the diversity of functional requirements involved in applications like industrial handling/lifting (travelling cranes, self-propelled devices), construction (tower cranes, concrete pumps), industrial vehicles (truck-mounted hydraulic cranes), industrial equipment (compactors, drilling machines)
To satisfy these requirements, this new system integrates numerous possibilities in terms of :
- number of joysticks (2, 3, 4, 6)
- type of joysticks (proportional or notches for 1 to 6 speeds)
- type of buttons for auxiliary functions (pushbuttons, selectors with 2 or 3
fixed positions, selectors with 2 or 3 positions + automatic return)
- number and type of outputs (16/24/32 relays, 2/4/6 analogue)
The ergonomic transmitters facilitate the operator's control tasks.
Many safety aspects have also been taken in consideration : system adaptation to all radio-electric configurations of the environment by possibility for the trained operator to change the frequency (69 frequencies in the 433 MHz bandwidth), joysticks and function buttons mechanically protected to prevent unintentional actions, compliance with European directives and regulations (electromagnetic compatibility, low voltage, radio electric machine directive).
|
|
MD multi-step joystick system
The MD controller is highly-configurable, and available with either multi-speed or single-speed joysticks. The multi-speed version allows up to 3 joysticks, each with up to 5 speeds on each axis. When partnered with the 18, 24, or 31-command receiver, the MD is a versatile controller for overhead cranes, tower cranes, or many other applications.
MD single-step joystick system
The MD-P is a variant of the MD controller fitted with up to 3 single-speed joysticks. The ideal partner for concrete pumps with ON/OFF control, the MD-P may also be fitted with a dedicated proportional output for controlling the pump speed. The MD-P offers all the convenience and electrical-isolation advantages of remote control together with a superior safety level. |
|
IKUSI provides global services and solutions for the remote control, maintenance and monitoring of machines. It therefore researches, innovates and develops solutions for safe and remote handling of cranes and lifting machinery.
IKUSI TM703/4/5/6/7/8: Radio Remote Control Systems with console box transmitters for hoisting machinery and mobile applications with On/Off and/or analogue control
Main characteristics:
Available bands: 433/870/915/419/447/918 MHz
NiMH rechargeable batteries
Fast and intelligent CB70 battery charger
Main mechanisms:
- Two axes multi step or stepless joysticks configurations: opened and crossed.
Auxiliary mechanisms:
- 1-0-1 position selector switches with maintained position or forced return to 0 position
- 0-1 position selector switches with maintained position or forced return to 0 position
- 6, 16 and 24 positions binary and rotary switches
Easy and fast working frequency channel change by software and/or automatic working channel selection -LBT: Listen before talking-
CAN bus receiver with serial port available
Fully compatible with other field buses: IQAN, J1939 and Profibus
LCD70 display –optional- for feedback information from the receiver, including LA70 range limiter |
|
ARF18 Remote control
1 to 4 keys 1-way and 2-ways radio remote control
1 to 4* keys
Wireless control for 1 to 10 logical status up to 400m
1-way and 2 ways versions
433.92 or 868MHz
Specific marking on demand
Comply with the European standard RTTE EN 300-220 / EN 301-489
Consumer market, tertiary and industrial applications
Home remote controls (gate, vehicle, roller shutters…)
Home automation
Access control
Security – alarm
Remote control
Automatics, robotics… |
|
IKUSI is a globally focused business group, which is a key player in providing technological solutions in the communications and electronics field.
Its business project is based on lasting and mutual confidence with customers, employees, shareholders and suppliers, and society, and on the sound values underlying the company’s operations since it started trading over 50 years ago.
IKUSI works in two business areas - Electronic Systems Integration and Design and Manufacture of Electronic Equipment - whose sphere of application includes many different sectors, such as railways, airports, construction, roads, security or television, to name just a few.
As a systems integrator, IKUSI offers its customers from different sectors its well-established capacity to integrate systems, which always deal with the specific needs and features of each case. The projects are integral, which means that they cover the designing, engineering, installation, software development, commissioning and maintenance of the most advanced systems on the market.
As an electronic equipment manufacturer, IKUSI has always been part in the successive technological revolutions that have taken place since halfway through the last century, and has incorporated the new technologies, developped equipment and offered services that facilitate instantaneous and nearly unlimited access to information. |
|
| With system T60-Cougar you have many choices. The transmitters are available in versions with 1 to 15 functions. They can be read in to the receiver in two different ways, depending on how many persons that should be able to control the application. T60-Cougar transmits on 433.92 or 869.85 MHz, wideband radio. The receivers are available with 3, 4 or 8 relay outputs. |
|
| System T20 for controlling of door, port and gate applications. The system includes more than 16 million set codes, and each transmitter has its own specific, individual code. System T20 transmits on 433,92 MHz or 869,85 MHz, and despite its small size it is extremely secure. |
|
| With system T70-Jaguar there is always an available channel you can transmit from, even if there are other radio remote controls nearby. The system transmits on 433 - 434 MHz, a total of 64 channels and narrow-band radio. The transmitters are available with 2, 3 or 6 functions and the receiver with 3 relay outputs. |
|
Pushbutton Handsets with 10 or 12 main pushbuttons (MK 10-22, MK 12-22); 10 to 28 controls are easily configurable by means of various optional actuators: Pushbuttons, Toggle switches, and Key-operated switches.
MK 10DF, featuring Data Feedback, can receive and display data from the controlled machine on a backlit 2-line Liquid Crystal Display or LED lamps. Dedicated pushbuttons control the display's backlighting and data scrolling. |
|
IKUSI provides global services and solutions for the remote control, maintenance and monitoring of machines. It therefore researches, innovates and develops solutions for safe and remote handling of cranes and lifting machinery.
Ikusi launches its new range of ATEX-approved TM70 remote controls
Ikusi continues to expand its range of TM70 remote controls. At this time it has incorporated two new pushbutton remote controls, type I and II, which have the characteristic of having obtained ATEX approval, which refers to the use of this type of equipment in potentially explosive environments or atmospheres.
Consequently, type I and II pushbuttons of the TM70 range can now be installed in potentially explosive environments, presenting powder or gases. The only limitation of the certification grade in environments with gases refers to Acetylene and Hydrogen.
The ATEX Directive (94/9/CE) entered into effect on 1st July, 2003, and from June 2006 any equipment, either used or new, which does not comply with this standard should be replaced. |
|
IKUSI provides global services and solutions for the remote control, maintenance and monitoring of machines. It therefore researches, innovates and develops solutions for safe and remote handling of cranes and lifting machinery.
IKUSI TM70 1/2: Radio Remote Control Systems with Handheld pushbutton Transmitters
Main characteristics:
High sensitivity two step push buttons
Available bands: 433/870/915/419/447/918 MHz
External and extractable SIM module to configure easily of a spare transmitter providing easy maintenance.
NiMH rechargeable batteries
Fast and intelligent CB70 battery charger
1-0-1 position selector switches with maintained position or forced return to 0 position (optional)
Easy working frequency channel change by software and/or automatic working channel selection -LBT: Listen before talking-
CAN bus receiver with serial port RS-232 available
Fully compatible with other field buses: IQAN, J1939 and Profibus
LCD70 display option for feedback information
LA70 range limiter option |
|
The UR and UD series offer a wide range of enhanced-safety radio remote controls with buttons, with the following features :
- Permanent radio link
- 64 frequencies in 433-434 MHz, programmable by the user
- Safety stop function cat. 3 as defined by EN954-1
- Reinforced safety characteristics to comply with European standards and
directives
- Electronic key ensuring that the equipement is only used by a trained
operator
- Optional infra-red start-up function to ensure safe start-up of the
controlled equipment.
- ATEX option
UR series : ultra compact transmitters, 2 or 4 function buttons + start +
stop. Fixed accumulator.
UD series : compact transmitters, 6 to 10 function buttons + start + stop.
Plug-in accumulator pack.
Main applications :
- Industrial lifting (travelling cranes, gantry cranes, hoists, monorail jibs)
- Person elevators (elevating platforms)
- Building industry equipment (tower cranes)
- Industrial equipment
- Industrial vehicles
|
|
| With the T80-Leopard system you radio control electric hoists. The transmitter has 10 x 2 functions and can control 2 receivers. The receiver has 6 functional relays and 2 safety relays. |
|
| With the 860-Lion system you can radio control cranes, overhead cranes, electric hoists, lift tables, etc. The transmitter is available in 3 different versions with 4 x 2 + 2 x 1, 20 (10 x 2) and 24 (12 x 2) functions. Depending on your needs and what your application requires, you can get the receiver with 10, 15 or 24 functional relays. |
|
| The pushbutton radio type M550 WAVE S range is available with 4, 6 or 8 double-step pushbuttons for the movement commands. In addition, and always present is a Start/Klaxon button and a STOP mushroom-head button. The radio remote also has space for one optional command which can be a multi-position rotary switch, a single-step button or an analogue potentiometer. IMET have paid special attention to the ergonomic design of the WAVE transmitter bearing in mind the practical aspects of compact overall size, large pushbuttons suitable for operations with gloves, easy access and protected STOP button. This make the WAVE S an ideal tool for the control of hoists, overhead cranes and small tower cranes. The possibility of customisation extends the possible uses of this type of transmitter to a large variety of machines equipped with on/off control boxes whether AC or DC powered. |
|
| The transmitter ZEUS NJ has been developed for use with high complexity machines where proportional potentiometers, push-buttons and selector switches represent the ideal types of movement commands. The spacious console has room for a large number of commands making ZEUS NJ flexible and customizable for complex AC and DC powered applications. |
|
Witura WT 9001 IP 65 GSM remote control and alarm system allow you to use your mobile phone to monitor and control your business from any location. Its alarm facilities provide a flexible way to distribute critical alarm information to any number of mobile phone users.
More versatile than pagers system, WT 9001 provides detailed alarm messages, secure alarm acceptance, full alarm reporting and even remote process control. This allows user to rectify problems directly via their mobile phone within minutes of the alarm occurring.
The devices can monitor 8 digital switch inputs. A SMS alarm message can be sent when input exceed preset limits. The user can also interrogate the input through SMS messaging. The WT 9001 IP 65 also has 8 replay outputs which can be activated via SMS and used to switch lamps, pumps, heaters etc. The WT 9001 IP 65 is compete with an LCD display, back up battery and build in Quad Band 850/900/1800/1900mhz modules
Characteristic
1. Control/ Monitor via GSM Mobile Phone, with no distance limitation, the user can control / monitor / alarm their installation from over the world via their mobile telephone
2. 8 x mains rated relay outputs.
3. 8 x digital input
4. Digital inputs can generate SMS message on contact closure
5. Relay output controlled via SMS
6. Dot Matrix LCD displays. Shows all channel values, input and output status.
7. Mobile phone can read digital input status
8. Up to 8 separate mobile phone numbers can be dialed.
9. Automatically sends SMS text message when input activated
10. IP 65 rated enclosure |
|
Our Hand Held (HH) systems are designed with the primary focus on applications which require a single hand operation. The easy to use transmitters fit right in the palm of the operator's hand and are light-weight, yet very sturdy.
The push button versions are ideal for, but not limited to control hoists and monorail systems.
The toggle switch versions are mainly used for smaller sized service and telescopic cranes. In addition to digital switches, it offers a single proportional output. This proportional output is activated by a trigger or a potentiometer on the transmitter. |
|
| The ZEUS M6 transmitter utilises the same transmitter body as the B2, combined with specially designed proportional joysticks for applications such as hydraulic proportional cranes, telescopic handlers, crawler vehicles and any other kind of machine for witch single-axis joysticks represent the ideal type of movement command. The ZEUS M6 console has a compact size but again, reserves plenty of space for additional on/off and proportional commands making it an easily customisable transmitter for special applications |
|
The HETRONIC NOVA family of transmitters sets the standard for today's industrial radio remote controls.
The small and sturdy design of the NOVA-M is not too small to allow operations with gloves. No compromises are made in regards of functionality and operator friendliness.
The NOVA-M is available with either two dual axis joysticks (digital or proportional) or with one dual axis joystick (digital or proportional), leaving room for auxiliary functions. It comes standard with a battery charger and two rechargeable batteries.
|
|
The ZEUS B2 transmitter combines the advanced ergonomic design and functional features required in standard application fields such as tower cranes, factory cranes, small concrete pumps, high pressure and vacuum pump vehicles and any other kind of machine for witch double-axis joysticks represent the ideal type of movement command.
The ZEUS B2 console has a compact size but nevertheless it reserves ample space for on/off and proportional commands making it an easily customisable transmitter for special applications. |
|
| The THOR B3 transmitter has been designed for use with a vast range of complex and high integrity machines, such as, 4-5 booms concrete pumps, full accessory equipped factory cranes, 6 functions hydraulic cranes, special tower cranes, drilling and tunnelling machines. In addition to the 3 double axis joysticks, the extra wide THOR console has capacity for several on/off and proportional commands making it an easily customisable transmitter for special applications whether AC or DC powered. |
|
| Cavotec Micro-control offers a wide range of radio remote controls for the crane, steel, offshore, mining & tunneling, maritime and the process industries. The high quality, service-friendly, ergonomic design together with a technological leadership and vast sales and service organization gives us the opportunity to meet the specific requirements of our customers, in a quick and cost-efficient way. |
|
|
|
