|
|
Nida-Bond is a specially formulated, polyester based core bedding compound developed by Nida-Core Corporation for hand lay-up and vacuum bagging core installation. Use of premium resins results in high tensile and flexural strength. Its high adhesive strength provides an excellent bond between the core and the laminate. Its is suitable for most coring applications and is compatible with our Foamline, BalsaLite and Nida-Core, TecnoCore, PVC and SAN foam core materials. Characteristics include: lightweight, non-sagging, and long working time for coverage of large areas. Consult MSDS for additional handling, storing and safety information. NidaBond is available either Pumpable or Trowelable.
|
|
The challenges in the production of lightweight composites increase with the multitude of materials. In these applications, the adhesive plays a decisive role. Beside bonding durably and reliably, it has to perform additional functions: flame retardation, blocking or controlled permeation of vapor, damping of vibrations, accommodating elongation differences, and much more.
New: for the manufacture of sandwich elements of aluminum or composites such asa FRP and an aluminum honeycomb core, we recommend viscoelastic Collano® adhesive films. Their adhesive strength exceeds the performance range of reactive systems, and they provide the composite with high resistance against fatigue and shock.
The new Collano® A8 is ideal for the manufacture of sandwich elements with fire-stopping properties and extreme mechanical alternating loads and vibration stresses. It is not only flame-retardant but at the same time very tough and elastic.
|
|
|
Master Bond Inc. formulates a wide range of one and two component adhesive systems for bonding metals. From aluminum to cast iron to stainless steel to titanium select Master Bond for your specific needs. They will speed productivity, reduce waste, save energy and enhance produce capabilities. Job proven for over 30 years, Master Bond products are employed in industries ranging from aerospace, optical and electronics to oil/chemical processing, medical and automotive.
|
|
10:1, flexible methacrylate adhesive offering fast fixturing and cure time to thermoplastics and composite materials. Fast setting formula allows for quick turn around for assembly parts. Excellent adhesion to galvanized metals when used with Metal Prep 90. Use with Mix Nozzle #14287
KEY FEATURES
* Designed for bonding thermoplastics, thermosets, metal, and composite assemblies
* Superior impact and fatigue resistance
* 10:1 formula
* Functional cure in 1 hour
* Bonds galvanized metal with Metal Prep 90
* Tensile elongation to 100%
|
|
NORPOL FI-177-10 is a low exotherm, light-weight sandwich adhesive, based on a high quality ISO/NPG resin. NORPOL FI-177-10 is accelerated and changes colour from light blue to white shortly after the admixing of peroxide.
•Recommended peroxide dosage: 1.5% low exothermic Peroxide (NORPOL PEROXIDE 19)
•Recommended application temperature interval 18-23 ºC
VARIOUS PROPERTIES
NORPOL FI-177-10 is mainly used to bond single core material sheets together and for bonding core material to GRP laminates.
NORPOL FI-177-10 is formulated for use in vacuum bagging.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
NORPOL FI-170 is a multi-purpose bonding paste based on special polyester resins combined with selected fillers and additives.
NORPOL FI-170 is pre-accelerated and has a white colour. NORPOL FI-170 changes colour from bluish white to white in <5min. after the admixing of peroxide.
•Recommended peroxide dosage: 1.5% MEK Peroxide (NORPOL Peroxide 1)
•Recommended application temperature interval 18-23 ºC
•Sag/flow: Will not sag provided a maximum thickness of 15 mm is observed. Not horizontally self-flowing.
Applicable as a general purpose bonding paste.
VARIOUS PROPERTIES
Suitable surfaces: Glass-fibre reinforced products and cellular plastics.
Workability: Hard to grind.
The bonding paste should be stored at 18-25 ºC. If the product is below a temperature of 18 ºC (which does not affect product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
The GRAVICOL® range of bonding pastes are designed for the assembly and bonding of glass reinforced plastic moldings. All of the bonding pastes in the range are pre-accelerated and require only the addition of a
standard MEKP catalyst. The pastes can be used for bonding two parts, insert panels, core materials. They can also be used for cavity filling and as an aid to lamination to help reduce the chance of air voids. When designing the bonding pastes there are several key areas we look at and control to
suit the numerous application areas of the pastes : - Gel/Cure Times - Low Shrinkage Levels - Application Methods - Mechanical Properties
|
|
|
|
|
|
NORPOL FI-184 is a vinyl ester based bonding paste for bonding polyester laminates giving joints with great strength and toughness.
NORPOL FI-184 is pre-accelerated and is changing colour from light grey to yellowish/brown <5min. after the admixing of peroxide.
•Recommended peroxide dosage: 2.0% CHP peroxide (NORPOL PEROXIDE 24)
•Recommended application temperature interval 18-23 ºC
•Sag/flow: Will not sag provided a maximum thickness of 20 mm is observed. Not horizontally self-flowing.
•Thicknesses up to 15 mm can be applied in one operation without causing cracks when curing
NORPOL FI-184 is suitable for machine application. We recommend running tests with the machine before starting the bonding job to ensure proper admixing of the peroxide.
VARIOUS PROPERTIES
Suitable surfaces: Glass-fiber reinforced products and cellular plastics.
Workability: Hard to grind.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
Chemically Fuse Engineered Plastics and Composites with Little or No
Surface Preparation
Unlike other adhesives and putties, Plexus "Fiberglass Fusion" Adhesives chemically fuse FRP, composites, and almost all polyester resins and gelcoats. Because they require virtually no surface preparation, Plexus Adhesives reduce assembly times by up to 60%. They produce bonds so strong that the substrates will delaminate before the bonds fail. Tough and durable, these super adhesives offer exceptional flexibility, impact strength, and resistance to fuels, chemicals, and water.
|
|
No Grinding or Surface Preparation
Plexus Adhesives bond engineered plastics, SMC, FRP, metals, and dissimilar substrates without grinding, surface preparation, or primers. As a result, they eliminate time-consuming and costly operations, lessen process variability, minimize dust, and greatly reduce the problems associated with toxic solvents.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
