|
|
Kemro UserID - the intelligent identification method
This innovative module for a quick and simple user identification makes an enormous increase in machine and plant productivity possible.
The Kemro UserID product line offers an optimal and comprehensive solution in this regard. With this solution, both the cumbersome user registration with names and passwords, as well as the extensive efforts needed for the maintenance and administration of user data, are no longer necessary at the machine level.
Kemro UserID not only registers names and access rights; with it one can also define a large variety of settings for each operator, such as the preferred language of the visualisation screens. This means that every user will immediately have the accustomed visualisation environment and preferred language at his disposal.
|
|
The TURCK identification system is a so-called RFID system (Radio Frequency IDentification).
Data are exchanged by electromagnetic waves.
The system operates wear-free and non-contact and is insensitive to temperature fluctuations (high temperature data carriers), dirt as well as water and oils.
Furthermore, it has a very long service life.
The system is comprised of:
- a mobile data carrier
- a read/write head
- a processor unit (interface module)
|
|
The RF identification system for production control.
- DTS125: Industrially compatible identification system in 125 kHz technology.
- Coding of workpiece carriers in routing conveyors.
- Quick and easy set-up: Plug and play.
- Read/write head requiring little space due to narrow design.
- Compact and at a low cost: Antenna and evaluation in one housing.
Innovation in production control
The constant increase of the degree of automation in modern production plants is increasingly supported by identification systems. Their tasks include for example the control or release of production steps or the assignment of information about each product.
|
|
Balluff provides a range of RFID systems to track work in progress and provide feedback on in-process testing. Computer-assisted manufacturing, modern warehouse systems, flexible assembly lines, plus logistics and distribution systems benefit from Balluff BIS RFID systems.
Balluff has developed a complete line of easy to use read-only systems that interface directly into a PLC through discrete inputs or an RS-232 interface. These systems offer data reliability and environmental ruggedness not found in bar code systems. Read-only systems are ideal when product data are stored centrally in a control system and referenced by a code contained on RFID tags located on products, parts, or pallets.
|
|
|
|
|
|
Active RFID System FC-406:
Applications
. Mine worker tracking security system
. Hospital Intelligent management
. School security system
. Intelligent residential area management
. Prison security management
. Asset tracking and management
. Entry management
Features:
Low power consumption design,battery life 1-3years
Able to replace battery
IP67 water-proof level
Two call buttons
Anti-collision design
Two-color LED display
Speaker inside Tags
Range between tag and reader over 100 meters
RFID system is composed of three parts:
Tag: Each tag has a single ID code.
Reader: The device for reading or writing the tag information. It has two
kinds of reader: Fixed reader and handheld reader.
Antenna: To transfer the signal between the reader and the tag.
The reader provide the standard RS-232 interface and USB interface, The interface rate is 19200bps(8N1).
Specification:
Tags
Frequency :433.92MHz,868MHz,915MHz
RF data rate :19.2kbit/s
Modulation:FSK
Dimension: 65mm*42mm*14mm
Housing: ABS
Memory:read/wirte, 1k bytes
Storage Temperature: -30C--+70C
Reader
Frequency :433.92MHz,868MHz,915MHz
RF data rate :19.2kbit/s
Modulation:FSK
Dimension: 85mm*55mm*25mm
Housing: ABS
Storage Temperature: -30C--+70C
|
|
Control Boards
The Control Board is the central processing unit that handles information being passed from a host device (PLC, Computer, I/O Device) onto a Balogh RFID Tag. All Balogh Control interfaces have been designed for the specific bus architecture it functions on. This means no gateway devices, no passthroughs, and no special software.
|
|
For decades SICK has offered a large number of solutions in the field of identification for almost any problem. Now the product portfolio has been expanded by a new technology: Radio Frequency Identification.
Logistics, curier express parcel services, automobile manufacture - RFID can be utilized to identify pallets, ensure smooth transport of totes or match the content to the right transport box.
RFID allows identification, even with difficult environmental conditions, without visual contact between reader and object to be identified. This allows a reliable and fast detection. Identifying faster means commissioning faster - commissioning faster means higher efficiency and therefore real cost reduction.
SICK as a complete supplier for Auto Ident applications opens up a great variety of application possibilities with RFID and barcode.
|
|
|
Omron's Radio Frequency Identification (RFID) systems act as portable databases allowing information to be accessed and modified at any point on the production line providing a non-contact, non-line of sight method of automatically gathering, inspecting and distributing production data.
|
|
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
|
Datalogic can offer the market one of the most complete ranges of radio frequency identification devices, and includes read-only and read-and-write systems, both active and passive. These identification solutions are suitable for anything from harsh industrial applications to clean rooms, and include RFID offerings ranging from 125 KHz to 13.56 MHz and Network Interface Modules.
|
|
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
| ... products without technical information |
| |
24 hour on-line diagnostic system
Energy saving and extention of aircon operating life
Maintenance management via service reports
Reliable service at short lead time
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
PGC's humidity generating systems are unique. The sources for humidity,
dehumidification, heating, cooling, and circulation are all packaged in
one self-contained unit. This unit is specifically designed to provide 500-
1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature
control.
Since this generating unit is selfcontained, it can be easily used to
condition existing spaces, small walkin rooms, and custom chambers. The
conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply
|
|
|
ACUair hygienic air-handling units incorporate state-of-the-art technology to provide refrigeration and meet filtration, pressurization, condensation control, and sanitization standards required by the food processing industry. Designed for rooftop installation, the units are custom engineered to produce the psychrometric conditions you specify. ACUair products are the answer when clean conditioned air is needed for today`s hygienic food processing requirements. We offer a wide range of air distribution accessories including supply air diffusers, return air boxes or grills, and exhaust fans.
|
|
Product Features
* The DC line of Evaporators developed out of our commitment to supply products for specific customer applications.
* The DC line incorporates two vertical coils mounted parallel to each other with a common fan section between the coils.
* The two-coil design allows for maximum capacity with energy efficient propeller fans in a low profile design.
* They can be specified as either two-directional horizontal air flow or single direction vertical down air flow.
* Interconnecting piping is provided to simplify system design and minimize field connections for the installing contractor
|
|
| ... products without technical information |
| |
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25s precision low energy control.
|
|
|
|
|
|
PS-900 Soldering System
The power to solder demanding loads, the control to assure consistent results.
The OKi PS-900 Soldering System, powered by SmartHeat Technology, is part of a new generation of cost-effective soldering systems from OK International. The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. The PS-900 provides operators the repeatability to produce high quality solder connections with exceptional speed.
More Applications
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
Low Operating Costs
The PS-900 is designed for simplicity and low maintenance. With SmartHeat Technology at its core, it requires no calibration. Moreover, it uses high quality tips that assure low ongoing operating costs. Its low cost makes it the perfect choice for small or large production environments, which need exceptional performance, while being mindful of operating budgets.
|
|
Eye-Rim forming machine 2D/3D
Aquisition of the model through a feeler pin. Better accuracy of the finished product thanks to the improvement of the wire properties by using a set of pressure rollers in the horizontal and vertical axes. Easy and quick machine setup when changing wire dimensions. Double check to verify there is no wire slipping to prevent any length difference. Highly precise and fast hydraulic cutting system with the possibility to choose a straight or a "V" cutting. Built-in PC and 14' "CRT monitor" equipped with a continuity group to prevent any data loss in case of black out. Easy realisation of new rim models, with curvature from 4 to 9. Easy correction of both eye shape and curvature where necessary. User-friendly "help on line" software.
|
|
|
|
|
|
The Master Controller V2 is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller comes with a set of four predefined programs. All operating parameters for each phase of the heating cycle can be programmed within a wide range of values. This allows maximum flexibility in setting the heating and cooling times, the power supplied by the induction generators, the operating temperatures for the piece being worked on and the quantity and feed speed of the solder.
Together with the optical temperature sensors (SH series) and the solder dispensers (WF series), the CEIA Master Controller V2 allows the creation of efficient induction soldering systems and achievement of completely repeatable, economical heating processes and finished products.
An RS-232 serial interface allows connection to a PLC, PC or external logic for remote loading and running of operating programs.
The photocoupler-type static inputs have programmable P/N logic, and together with the static outputs are subject to a programmable auxiliary voltage of 12/24 V.
|
|
| ... products without technical information |
| |
 see the results for the following category : AC drives |
|
|
