|
|
The new and innovative range of helical and bevel-helical units combines the most advanced design concepts and performances in full compliance with international standards (ISO, DIN, AGMA, etc.) for calculating gear geometry. We have focused our attention on researching the simplest and most standardised design and production methods with the aim of making production even faster and delivery times even shorter.
The high power to weight ratio of all units, combined with low volume, enables perfect installation in the most critical situations. One of main features of this range of gear units is the great versatility of applications and mounting, in terms of both position and fixing on site.
New concepts have been used to improve the noise level in a consistent way, by grinding all gears sets, both the helical and the Gleason spiral bevel type gears.
Because of higher capacity, particular consideration has been given to efficiency and housing surface area to guarantee a convenient heat dissipation in most cases.
|
|
| ... products without technical information |
| |
ALTERATION PLAIN OUTPUT SHAFT OR WITH KEY
Only applicable for alterations (lengths and/or diameters) smaller than standard shaft. See table below.
Contact us for dimensions superior to standard shaft. |
|
In applications where it is necessary to ensure proper alignment between a gearbox and a driven shaft, Brevini's in-line and right angle shaft mounted planetary gearboxes provide the ideal solution.
The ability of the compact and efficient shaft mounted gearboxes, not only to provide alignment between shafts, but also their flexibility of use and the fact that no machining is required to mount them to frames, are all major factors in their widespread use across all industry sectors. Complementing these user benefits is the flexibility offered by two different types of shaft configurations: hollow shaft for shrink disc connection or keyed cylindrical female shaft (FP type). |
|
The FHA-C series digital AC hollow-shaft servo actuator, combining precision Harmonic Drive gearing with highly dynamic AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package. A HIPERFACE® or Siemens compatible encoder with sinusoidal output signals provides feedback information for the FHA Series Actuator with Sine/Cosine Encoder. The actuator is compatible with a wide variety of currently available digital servo drives for Sin/Cos motor feedback systems, e.g. Simodrive 611D/611U, SIMOVERT-MASTERDRIVES or NUM MDLU. Matching SC-610 digital servo control units, which can be used for current, speed or position control are also available.
Advantages:
- Backlash-free precision gear
- Hollow shaft from 18 mm to 45 mm
- Transmission accuracy < 60 arcsec
- Repeatability < ± 6 arcsec
- Sine-commutated AC hollow-shaft motor
- Motor winding for 320 VDC / 600 VDC
- Winding temperature monitoring via temperature sensor
- High capacity and high stiffness cross roller bearing
- Sine/cosine-encoder for use with SIMODRIVE 611D/U and SIMOVERT MASTERDRIVES MC
- HIPERFACE®- encoder for operation with Harmonic Drive® servo controller SC-610 or a variety of further servo controllers (NUM, CT, Danaher Motion, Elau, etc.)
- Good controllability even at low speed
- Compared with the previous FHA-B the new FHA-C series has the following additional features:
- higher maximum torque
- more compact design
- higher torsional stiffness
- higher maximum speed |
|
SERVO-MOTOR FHA-MINI
hollow shaft Mini-servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE.
Mini servo-motor cubes with hollow shaft.
There exists in 3 sizes: a cube of 50,60 or 75mm on side.
Benefit produced:
* Most compact of the market: 4,8Nm in a cube of 50mm of with dimensions!
* High dynamics with its engine brushless
* Utmost precision with the reducer with null play HARMONIC DRIVE.
Characteristics produced:
* Vmax up to 200 tr/min,
* Cmax until 28Nm,
* Mini hollow shaft of 6,2 with 13,5mm,
* A cube of 50,60 or 75mm on side,
* Report/ratio of reduction: 30,50 or 100,
* 2 tensions of winding to the choice for a maximum adaptability,
* Hollow shaft, high integration, facility of startup,
Sectors of use:
* Robotics,
* Machine tools,
* Special machines,
* Embarked solutions. |
|
| DSTI can provide custom rotary unions designed to mount directly to an existing shaft. These units can be used to feed air, grease & other medias into rotating shafts. Please consult your DSTI representitive to discuss the details of your specific application. |
|
Rotary Systems designs and manufactures a line of standard and custom over-the-shaft rotary unions.
The rotary union shown is constructed from carbon steel and utilizes a precision ground shaft, radial ball bearings and Teflon seals. This is a two passage rotary union with .25" NPT passages with a four inch bore through the shaft. This union was designed specifically for a high pressure hydraulic indexing application.
Our standard over-the-shaft line of rotary unions can be viewed on our website by clicking on the 011 series. Our standard unions are offered in two and four passages with a .5", 1.5” or 2.0” bore through the shaft. The bore through the shaft is independent from the union. Some customers will pass a shaft or electrical wires through this bore.
If you have a custom rotary union application, please contact our Technical Sales department at 1-800-959-0146.
|
|
Frame sizes: 60 mm, 130 mm, 200 mm
Max. speed: 200 r/min (200 mm-type: 110 r/min)
Max. thrust force: 100-4000N
Repetitive positioning accuracy: ±0.004°
Max. permissible torque: 0.9Nm - 50 Nm
Resolution: microstep 0.002-0.04°/step
Power supply: 230V AC for 130 mm/200 mm-type, 24V DC for 60mm-type
Marking: CE, UL and cUL |
|
| Wide selection of sizes, high thrust capacities and broad range of mounting flexibility. Maximum dynamic thrust capacities range from 125 lbs to 4700 lbs. Strokes in any incremental length up to 60 inches depending on body size. Conform to both NFPA and ISO industry mounting standards. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| KOMAX is a specialist in the plastic extrusion and designs, develops and manufactures extrusion and coextrusion systems. KOMAX centers its development on the partnership with its customers by offering performing machines adapted to their needs. |
|
... see all the products in the category
Extruders
|
- flange opening is at top central position for easy operator
access, and to avoid the disassembly of the opening button
in the DX or SX safety chucks;
- a safety button first needs to be pushed in before the
flange will open. Designing the button to be pushed
eliminates potential accidental opening by centrifugal force.
- components are finished to a high quality, with the safety
flange being dynamically balanced and chrome plated as
standard.
- the inserts are replaceable and designed in a variety of
shapes and sizes such as alveolar, square, round-square. |
|
The PODIUM UNIT FOR CAGE Of ELEVATOR includes/understands:
A cast solid framework
Extensible cross-pieces
Slides of back extension
Folding and adjustable mountings in height
Two extensible beams of safety in length retained by chains
A railing partly low
A plywood ép flooring. 30 mm
In option:
Trap door of access, Scale of nonfolding access, Flooring on the beams
Dimensional specifications:
Width of 1.60 m to 2.60 m (adjustable with the step of 5 cm)
Depth of 1.60 to 2.40 m (adjustable with the step of 1 cm)
Height from 2.50 to 3.70 m (adjustable with the step of 10 cm)
Working loads:
Overload circulation: 180 daN/m ²
Height of maximum form: 3.80 m (150 daN/m ²) |
|
| Verimation Technology, Inc. is a leading manufacture of Ultrasound Test Systems for automotive applications. This method of Non-Destructive Testing is very accurate and reliable. Testing is performed by coupling short bursts of high frequency sound waves to the test part. The wave patterns are then analyzed and test results are generated. This method of testing can find internal flaws and analyze material properties without cutting or destroying the part. |
|
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
Superior sealing
Double-row ball types & ball/roller types
OEM/ODM drawings or samples accepted
Primary Competitive Advantages:
Price
Quality Approvals
Main Export Markets:
Worldwide |
|
Vertical machining of shafts up to 1000 mm length
The machining of shaft-type components turned on its head.
The VTC is used to vertically machine shafts and shaft-type components of up to 1000 mm length. The EMAG tool turrets allow for 4-axis turning operations and also handle the task of loading and unloading the machine ... and more |
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports |
|
| High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers. |
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2". |
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design< | | |
