|
|
Manufactured to meet international standards for road surfacing
Reliable performance
Computerized operating systems improve quality and performance
Easy to operate and control paving operations
|
|
BENNINGHOVEN offer the complete range of technology and equipment to meet customers specific requirements for both hot and cold recycling, including single or double rotor asphalt planings crushers in fixed or mobile configuration.
The equipment is made to the expected BENNINGHOVEN standards and complies with all safety and environmental regulations.
Reclaimed asphalt is reprocessed after it has been reduced to an acceptable size by crushing.
BENNINGHOVEN offer single or double rotor asphalt planings crushers in fixed and mobile configuration.
|
|
Mobile Asphalt Mixing Plants ''Mix Mobile'' Type MBA
The Benninghoven range of mix mobile plants have been designed with total mobility in mind, together with quick low cost installation or relocation times. Easy relocation from site to site without high cost for carnage and transportation.
The pipelines are pre-fabricated and can be used at any other site and any time due to flexible connections.
|
|
Stationary Containerized Plants Typ EBA
This range of stationary asphalt plant is designed in container configuration with integral elevator, filler silos and stairways. Each containerised unit of the mixing tower comes completely fitted with its components and full cladding.
This system enables speedy installation and results in a good aesthetic appearance, essential for “sensitive” locations and for minimization of emissions such as dust, noise, fume, etc. Plant production from 240 –450 t/h.
|
|
Transportable Asphalt Mixing Plant ''Concept'' Type TBA
"CONCEPT" is the BENNINGHOVEN designation for an asphalt plant range that without compromising output, quality, environment or operation cost efficiency, still affords a high degree of mobility with production up to 320 t/h.
|
|
| ... products without technical information |
| |
QJ type deep well submersible pump is a water lifting tool, with the motor and pump integrated into a whole body and submerged into water. It is used to draw ground water from a deep well, or from river, reservoir and aqueduct etc. mainly for agricultural irrigation, water for human being and livestock in plateau areas, water discharge in cities, factories, mines and construction sites.
Product feature
- Integrated body of motor and pump, submerged operation of great safety.
- No special requirements on borepipe and ascending pipe(i.e. it can be used in steel pipe well, ash pipe well and shallow well; if pressure permits, steel, rubber and plastic pipes can all be used as ascending pipe)
- Easy installation, operation and maintenance, small occupation space, and no need of a pump room.
- Compact and simple structure and small volume.
|
|
Gorman-Rupp's SM Series line features Mine Safety and Health Administration (MSHA) approved submersible pumps for coal and gassy mines. Many models are available with stainless steel fitted parts or all-stainless construction for pumping in severe corrosive/abrasive applications. Standard with NEMA type 10 explosion-proof control box.
Specifications
Size: 2" (50 mm), 3" (75 mm), 4" (100 mm), 6" (150 mm)
Max Capacity: 2,100 GPM (133 lps)
Max Head: 380' (116 m)
Max Solids: 0.5" (13 mm)
Max Temperature: 122 F (50 C)
Materials of Construction: Aluminum, Cast Iron, Ductile Iron, Stainless Steel
Motor - Voltage: 460 V 3P, 575 V 3P
Motor - Cycles: 60 Hz
|
|
JJ Series submersible pumps are designed for installation in wells with guide rails. These pumps are designed specifically for solids handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature a semi-axial flow impellers that have a large free passage that will handle up to 5.5" diameter spherical solids, depending on pump model. The impeller design has long screw-like vanes for handling long rags and other debris. JJ Series pumps have a cooling jacket and do not require submergence to maintain correct operating temperatures.
Specifications
|
|
|
Gorman-Rupp Widebase submersible pumps tackle the big jobs. Where large solids are not a problem, these versatile models offer high-head, high-volume operation and stand up to the abuses of the worst conditions. Whatever the application – general construction, strip mining, tunnel work or general purpose – Gorman-Rupp Widebase pumps are built to operate quietly, effectively and safely.
|
|
Gorman-Rupp hydraulic submersible pumps are designed for trash-handling, dewatering applications and for pumping dirty liquids such as mining and paper plant wastes. They are also excellent for pumping sewage from digester and holding tanks as well as sewer bypass. Because they operate without using electricity, they are well suited for applications where electricity is hazardous.
Specifications
Size: 3" (75 mm), 4" (100 mm), 6" (150 mm)
Max Capacity: 1,600 GPM (101 lps)
Max Head: 175' (53 m)
Max Solids: 5" (127 mm)
Max Temperature: 170 F (77 C)
Materials of Construction: Aluminum, Ductile Iron
|
|
Nikkiso Cryogenic Pumps, wetted motor type submerged pump, specially suited for cryogenic liquefied gas such as LNG, LPG and LEG.
* Submerged wetted motor configuration eliminates leakage of liquids and make pump construction simple
* Long bearing service life by minimal gearing load design
* Pump test facility with LNG (-162℃) is available
|
|
| ... products without technical information |
| |
MOTOR SERIES - MTR3a/3b
Reversible Synchronous Motor - 250/ 500 RPM
Application - Recorders, Instrumentation, Diamond machinery, Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning & refrigeration, Dampers, Peristaltic Pumps, Dosing Pumps, Vending machines CCTV Camera positioning, any timing and positioning Application.
Design -
MTR3a/ 3b reversing synchronous motor is of the permanent magnet type with two
stator windings, for single phase AC 50/60 Hz. Phase displacement of the
excitation current is achieved by connecting a capacitor in series with one of the stator windings. The sense of rotation is determined by the resulting
circular rotating field. Electrial reversal of the sense of rotation is effected by means of a single-pole changeover switch. The 24/ 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with mounting plate / screw clip for fixing.
|
|
MOTOR SERIES - MTR7a/ D7a
REVERSIBLE SYNCHRONOUS MOTOR - 250 RPM
Application - Reversible power drive for actuators, pumps, label printing
machines, medical and optical equipment, office machines, automatic vending machines, machine automation
Design - The MTR7a/ D7a reversing synchronous motor with parmanent magnet rotor is electrically reversible and due to its unique stator design it is moderately priced. The rotating field is produced with a phase-shift
capacitor and double-stator with coils thus ensuring extremely quiet
running. Long life is guaranteed by the robust design (sintered bronze
bearings; self-centering type). The MTR7a/ D7a is operated with singlephase AC current. The same motor version can be used at 50Hz and 60Hz.
|
|
MOTOR SERIES - MTR8c
REVERSIBLE SYNCHRONOUS MOTOR - 375 RPM
Application - Reversible power drive for actuators, pumps, label printing
machines, medical and optical equipment, office machines, automatic vending machines, machine automation.
Design - The MTR8c reversing synchronous motor with permanent magnet rotor
is electrically reversible and due to its unique stator design it is
moderately priced. The rotating field is produced with a phase-shift capacitor and double-stator with coils thus ensuring extremely quiet running. Long life is guaranteed by the robust design (sintered bronze bearings; self-centering type). The MTR8c is operated with single- phase AC current. The same motor version can be used at 50Hz and 60Hz Various windings of motor are available that are tailored to specific requirements. Only some types are listed.
|
|
MOTOR SERIES - MT6
UNIDIRECTIONAL SYNCHRONOUS MOTORS - 600 RPM
Application - Instrumentastion, diamond machinery, peristaltic pumps,motorised displays, programming devices, cam timers, medical equipment.
Design - MT6 is a unidirectional synchronous motor. The direction of the motor is either cw or ccw which is fixed with help of reversing stopper while manufacturing. This non reversing device also guarantees at all times starting in the desired direction with high starting torque. The motor consists of a cylindrical sheet iron stator which form the poles. Mounted on the hardened and
highly polished rotor shaft is a high coercitivity sintered magnet ring around whose circumference 10 poles of alternate polarity are disposed, Special version of motor without the non reversing device is also available. In this case the motor can start in any direction. Motor can be priovided with screw
clip for fixing.
|
|
MOTOR SERIES - MTR9a/ 9b/ 9c/ 9d
REVERSIBLE SYNCHRONOUS MOTOR - 1000 RPM
Application - Reversible power drive for special purpose m/cs, actuators, pumps, label printing machines, medical and optical equipment, vending machines etc.
Design - The MTR9a/9b/9c/9d reversing synchronous motor with parmanent magnet rotor
The rotating field is produced with a phase-shift capacitor and doublestator
with coils thus ensuring extremely quiet running and smooth operation. Long life is ensured by the ball bearings. Compared to normal parmanent magnet synchronous motor that operates on tin can principle, these motors are more
efficient. At same time the temperature rise is significantly higher
in this motor. MTR9a/9b/9c/9d is operated with single-phase AC current. The same motor version can be used at 50Hz and 60Hz.
|
|
MOTOR SERIES - MTR5
REVERSIBLE SYNCHRONOUS MOTOR - 500 RPM
Application - Recorders, Instrumentation, Diamond machinery, Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning &
refrigeration, Dampers, Peristaltic Pumps, Dosing Pumps, Vending machines CCTV Camera positioning, any timing and positioning Application.
Design - MTR5 reversing synchronous motor is of the permanent magnet type with
two stator windings, for single phase AC 50/60 Hz. Phase displacement of
the excitation current is achieved by connecting a capacitor in series with
one of the stator windings. The sense of rotation is determined by the
resulting circular rotating field. Electical reversal of the sense of rotation is effected by means of a single-pole changeover switch. The 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with Mounting plate/Screw clip for fixing.
|
|
MOTOR SERIES - MTR4a/ 4b/ D4b
REVERSIBLE SYNCHRONOUS MOTOR - 250/ 500 RPM
Application - Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning & refrigeration, Dampers peristaltic Pumps , Dosing pumps, Vending machines, CCTV Camera positioning, any positioning Application.
Design - MTR4a/ 4b/ D4b reversing synchronous motor is of the permanent magnet type with
two stator windings, for single phase AC 50/60 Hz. Phase displacement of
the excitation current is achieved by connecting a capacitor in series with
one of the stator windings. The sense of rotation is determined by the
resulting circular rotating field. Electical reversal of the sense of
rotation is effected by means of a single-pole changeover switch. The 24 /12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with Mounting plate/ Screw clip for fixing.
|
|
|
|
|
|
The greatest possible capacity, safety and reliability - these are just three of the outstanding features of the new FRONTPRESS. FAUN engineers have consistently developed the tried-and-tested FRONTPRESS frontloader, and equipped it with a range of well-conceived refinements and innovative techniques.
With years of sucessful use already behind it, the FRONTPRESS is the economical refuse collection truck for the collection of commercial waste.
One person moves it
The FRONTPRESS, a one-person-operated vehicle, provides a safe and comfortable workplace, as the driver is always well protected from the weather and from contact with refuse. There is no physically onerous work involved in lifting and lowering containers, as the powerful pickup arms grip the container accurately and effortlessly. Using a joystick, the driver controls the approach and emptying procedures with great ease from the cab. This is a valuable plus point having twofold effect - the driver is protected from injury by the container whilst at the same time enjoying the best possible view of the lifting situation.
Body 533 538
Body capacity m³ 33 38
Weight appr. kg 9670 10280
Width appr. mm 2550 2550
Hydraulic pressure max. bar 220 220
Lifting capacity N 35000 35000
|
|
he revolution for your waste disposal
With the EASYPRESS, FAUN is bringing a new generation of refuse collection vehicles onto the market: front-sideloaders on standard chassis. The EASYPRESS offers collection personnel a comfortable workplace by using the latest generation of standard chassis. With a lifter based on innovative operational principles, the EASYPRESS is a refuse collection vehicle with excellent overall design and economy.
Using a joystick, the operator can easily and conveniently control the entire loading process, and can view the entire work area in a relaxed attitude without additional aids.
With a body volume of 25 m³, the EASYPRESS is ideally suited to removing wastes of all types.
The EASYPRESS is available for many different standard chassis.
Body 525
Body capacity m³ 25
Weight appr. kg 7330
Length (L) appr. mm 7480
Width appr. mm 2530
Height (H) appr. mm 2640
|
|
|
|
|
|
The specialist for difficult cases
The POWERPRESS is the right solution whenever the most demanding requirements have to be satisfied. The POWERPRESS is not only an all-round collection vehicle for all containers up to 10 m³ (including bulk refuse), it is also designed throughout to cope with the toughest of operations. Within a progressive overall concept the POWERPRESS combines top-quality materials and workmanship with proven technology - an exceptional loader.
The POWERPRESS range
There is a POWERPRESS to meet every requirement: 18 m³ for two-axle chassis, 20 to 25 m³ for three-axle chassis and 30 m³ for four-axle chassis form the basis. With expert advice from your FAUN sales partner the right vehicle tailor-made to suit your exact requirements can be specified.
The POWERPRESS comes with open tailgate, or with DIN interface frames, or with a built-in FAUN lifter. Built-in lifters from FAUN, featuring an extremely low rave height, low gross weight, and excellent rave visibility ensure that they represent a particularly worthy investment.
|
|
|
|
|
|
The versatile machine for all your waste disposal needs
The VARIOPRESS is the solution for the future as far as the disposal of household and commercial recyclables and other waste materials is concerned. This refuse vehicle really does live up to its name. Because it is so versatile it can be utilised, regardless of the density of the waste and with any size of container, from 60 litre bins right up to, upon request, 5 m³ refillable containers.
Thanks to the option of body sizes ranging from 7 to 30 m³ and a choice of chassis ranging from narrow-track to the large four-axle version, a type can be specified to meet any individual requirement.
The VARIOPRESS comes with DIN bin lifter interfaces or with built-in lifters from FAUN. The extremely low rave height, light-weight construction, and the option of manual loading without reconfiguration make built-in lifters from FAUN an excellent investment.
The optional light beams at the tailgate of the VARIOPRESS allow a continuous loading mechanism cycle, even with a rave height of less than 1,400 mm. Should the light beam be interrupted by the downward movement of the loading mechanism, the compactor stops. The movement can be restarted at the touch of a button. This allows continuous operation of the loading mechanism, without the risk of a dangerous loading situation occurring.
|
|
|
|
|
|
When it comes to economy the ROTOPRESS is beyond compare. Thanks to its unique rotating drum principle the ROTOPRESS is the most economical refuse vehicle for the collection of household waste and equivalent commercial waste.
Fewer moving parts mean less maintenance and fewer repairs even with multi-shift operation. Just one reason why the ROTOPRESS is one of the most economical vehicles available as far as upkeep is concerned. Additional advantages offered by the rotating drum include: easy and residue-free discharge, low-maintenance screw press, a perfectly tight seal, no residues, no odours.
Profitable, hygienic, manoeuvrable and environmentally friendly - the attributes that make the ROTOPRESS the optimum solution for a variety of waste-disposal tasks.
Fitted with an appropriately sized bin lifter the ROTOPRESS can empty all containers from 60 litres to 1,100 litres. A particular environmental benefit of the ROTOPRESS becomes apparent during the collection of organic waste, in that it is immediately composted in the rotating drum.
Blends perfectly into the townscape
With its attractively clean design the ROTOPRESS blends perfectly into the townscape and retains its looks even after many years of service. More importantly, it still works perfectly too. Not surprising therefore that its resale value remains so high.
|
|
Rapid one-man operation
Innovative automated technology for cost-effective household waste collection. The SIDEPRESS is the ideal solution for suburban and rural rounds. The one-man operation, direct from the cab, will quickly reap financial benefits, with higher vehicle productivity.
The SIDEPRESS provides the driver with an ergonomic workplace. Thanks to the joystick control from the cab he does not come into direct contact with waste materials or bacteria. Instead of heavy physical work, often in close proximity to busy traffic, the SIDEPRESS offers a safe, ergonomic, hygienic workplace that is protected from the elements.
With the SIDEPRESS household waste of all types can be collected in containers ranging from 60 to optionally 1,100 litres, and the SIDEPRESS does not hang around. The optionally available "collection trough" also permits the convenient disposal of refuse sacks.
Weighing only 13 t, the SIDEPRESS offers high payload potential.
|
|
|
|
|
|
Rapid single man operation
The SIDEPRESS X is the logical solution, especially for areas of relatively low bin density, that quickly makes financial sense. The SIDEPRESS X can be used to collect household wastes of all types in MGB or DU bins ranging from 60 to 1,100 litres in size. Optionally, four-wheeled bins of up to 1.1 m³ can be presented for collection by hand. And the SIDEPRESS X does not hang around either. Up to 1,100 bins can be emptied per day on a regular basis.
Flexible transportation logistics
It often makes sense to separate refuse collection and transportation operations. This allows the collection vehicle to stay out on its round, giving it more time to do the job it was designed for, collecting waste. This is a good idea not only when large distances or congested traffic conditions have to be overcome. It often represents an intelligent solution in multi-shift systems, too. The FAUN demountable container systems offers customers a variety of options. On level paved surfaces, containers can be transferred onto trailers or railway trucks without the need for extra equipment. And they can also be emptied straight from the collection vehicle, on completion of its last collection without any additional equipment being required.
|
|
|
|
see the results for the following category : 
