|
|
Controlling of Zero-Pressure Systems
Rollex Drive-System makes the use of Zero-Pressure Systems easier. By simple combining of the single components with the Control-Board (Modular Principle) complex systems can be used very fast and cost effective.
The Zero-Pressure Switch has an integrated logic. It is able to communicate with other sections and so to regulate the flow of materials. The drive will only be switched on, if a load passes the Light Barrier of the Section, after leaving the Drive is automatically switched off.
The sectional switchs of the Electro Magnetic Clutch System Type 526E allows the additional mounting of a break. So the loads stop fast and smooth in case of stopping the section.
The Zero-Pressure Switch can be used without complicated controls and operates with all Rollex 24V Drive Systems perfectly. |
|
Superior Construction
¼" thick side rails
All rollers driven
Maintenance free cast iron housing sealed bearings
Adjustable structural steel leg assemblies
Interchangeable feet to allow pass height changes
Fully enclosed, guarded chains, top and bottom
Adjustable drive system
Easy to adjust without guard removal
Access from top of conveyor
Synthetic gearbox lubrication
All quick connect wiring for easy maintenance
Robust roller features
3/16" wall tubing
1 piece stub shafts machined from solid steel bar
Hardened sprocket teeth
1" diameter bearing shaft
Full weld around circumference of tube
Tubing machined at both ends to ensure concentricity
Chain Guarding
Full guarding top and underneath the conveyor
No chain pinch points |
|
Logistex GR200 Gravity Coi For simple and economical prouct transportation
Features:
- Available in light- and medium-duty frames
- Available in straights, curves, junctions, and gates
- Roller and skate wheel options
- Various pitches to suit all types of loads
Benefits:
- Quietly conveys a wide range of product types
- Can be installed either pitched or level
- Skate wheel design minimizes spare parts and provides layout flexibility
- Low maintenance costs with easy-to-replace pop-out rollers |
|
Pallet Handling
Pallet handling, pallet conveying, quick exchange of pallets and pallet stacking are only some of the processes that SOCO SYSTEM's pallet modules make very efficient.
The system is supplied in a variety of lengths, widths and heights.
Examples of modules are: non-driven and driven pallet roller conveyors, chain conveyors, pallet magazines, transfer trucks and rotary tables.
There is also a wide range of auxiliary equipment.
Pallet roller conveyors height 90
Pallet roller conveyors height 190
Accessories for pallet roller conveyors
Chain conveyors
Accessories for chain conveyors
Pallet rotary tables
Pallet transfer units
Pallet transfer trolleys
Pallet exchangers
Pallet magazines |
|
Pallet handling forms a vital part of all kinds of production and distribution processes. It extends right through the business process, from receiving of goods and materials up to shipping of finished products or sorted deliveries. That means fast, smooth and efficient handling of pallets is essential for the performance and reliability of those processes with pallet conveyors.
|
|
The pallet i-Veyor® is a product range of modular pallet conveyors. As a result of the mechatronic design and the integrated modular software it is easy to configure into any pallet transport system. The standard electrical control system shortens delivery and commissioning times and increases the system reliability and availability.
By making use of high quality materials and frequency controlled drives, smooth operations will be guaranteed and operational costs are kept to minimum. Also with the standardisation the components are easy and quick to replace and maintain when necessary.
The pallet i-Veyor® concept is a cost effective execution of modules that guarantee maximum system availability while maintaining the highest safety standards. |
|
We supply a wide range of conveyor equipment characterized by high quality, flexibility and reliability.
Application:
Designed for easy and reliable transport of single objects
Handles boards and packs
Can be integrated in both belt and roller conveyor systems
Below you will see a selection of our products such as the Belt Curve (BK 100-A 95) and the SPZ Roller Conveyor.
* Belt Curve (BK 100-A 95)
Features:
- Patented design for operation in heavy, industrial environments during continuous production
- Small drum design ensures easy transfer to and from other conveyors
- Low noise design - less than 60 dB(A)
- Easy and quick change of belt
- Robust, low-maintenance design
* SPZ Roller Conveyor :
Features:
- Robust design for frequent activation of conveyor
- A minimum of moving parts
- Easy and quick maintenance |
|
| Final packaging covers a very wide range especially in terms of dimensions, volume and external appearance along with film wrapped trays, cartons and cases ranging from light to heavy packaging materials. Combine these with the logistical and handling processes and you're talking about a complex situation. Our installations reduce problems due to poor pack control, high line pressures and badly designed merge points to give a system that can be installed and left to run unattended. Using pre-engineered standard modules as a basis, CSi can offer you solutions that are ideally suited to your requirements. Our special zero pressure accumulating conveyors feed some of the most demanding high speed palletising systems in Europe. |
|
Logistex VB200 V-Belt Driven Live Roller Conveyor Efficient transportation with maximum system layout flexibility
Features:
Pre-engineered for several standard module configurations
Options for roller centers, roller coatings, and operating environments
Patented, non-backbending take-up design extends belt life
Benefits:
Designed to extend belt life and simplify maintenance
True-taper curves maintain carton orientation through all product configurations
Direct drives maximize efficiency and reduce maintenance requirements |
|
The Metso Minerals Roller Conveyors are used as a method of separation for green iron ore pellets by rejecting undersize and oversize pellets.
Specific attention to roll spacing allows fines to sift through, leaving uniform pellets to continue through the process. Gentle handling by the roller conveyor maintains the integrity of the soft green pellets.
Both individual roll drives and synchronous chain drives are available. |
|
| According to your specification, the roller conveyors are tailor-made. The roller conveyor module in our MiniTec CADmenue construction software designs your roller conveyor automatically according to your requirements. Furthermore it calculates the deflection, suggests the number of supports and generates the parts list - within a few minutes. Assembly can be carried out quickly and easily as a result of our proven components. |
|
TRANSLIGNE is the distributer on France of the chain conveyer with accumulation SPANGLED.
This conveyer is used in all the industrial sectors including that very demanding of the car.
There exists in 4 widths standards: 250mm, 350mm, 450mm and 600mm being able to transport loads up to 200 kg per pallet.
The objective of SPANGLED is always to find a solution with the customer requirement, even if should be carried out special components.
Its potential of manufacture enables him to hold of the very short delivery periods at very competitive prices.
You can consult the heading description to obtain detailed informations on our conveyer, its implementation or the various possibilities of configuration.
|
|
The OAI clean room compatible conveyor is available in several styles suitable for a variety of material handling applications. The C2000 roller style intelligent conveyor offers certified Class 1 clean room compatibility for those critical applications in process areas that demand the lowest level of particulate contamination. The length of conveyor is segmented into nine-inch long zones Each zone is independently controlled by a control card which is networked to adjacent control cards and higher level system hosts.
|
|
UNEX Gravity Conveyor with treated ends brings superior flow and "drop-in" ease to applications that go beyond the capacities of standard carton flow. Now even heavy products (over 50 lbs/ft.), long unsupported spans (over 7 ft.) and difficult to convey items can achieve the benefits of live storage.
Conveyor provides a greater handling capacity than standard flow track and the steel rollers can withstand abusive conditions. The conveyor end treatments, designed for adding to rack, make installation and relocation easy, fast, and flexible.
- Rugged, Conveyor Based
- Steel Rollers and Channel
- Easy to Install and Relocate
- Add to any Pallet Rack
- Framework Available for Complete Track and Rack Units
- Superior Flow - Even for Hard to Convey Items
Applications :
- Add to UNEX Framework or Pallet Rack to Create Carton Flow
- Add to any Pallet Rack - New or Old!
- Add to UNEX Framework
- Cut Lengths to Fit Existing Footprint
- Product Always at the Pick Point
- Fifo/First In, First Out
- Dense, Organized Product Layout |
|
The Roller Loader has a telescopic boom which is unsupported from the vehicle floor and can be extended or retracted by a manual or powered system. It utilises a gravity roller bed to load packages into the vehicle.
For high throughput multi-unit applications the rollerloader provides a cost effective alternative to the MTC machine.
|
|
The roller drive conveyor is a very fast and solid conveyor supporting (great) loads. Appropriate for the assembly lines.
Examples of applications: agroalimentary industries. |
|
Pallet Rails for Light- and Heavy Weights
If for commissioning, transport or for guiding material, if made from metal or plasics, if for easy going or Heavy-Weight, here you will find the solution.
Pallet Rails are mostly used for
Pallet-transport (even across)
Transport of Cases
Transport of Parcels
Material transport to machines
The goods can be ordered in meters and Rollex even has lot of accessoires as Guide Flange Rollers, End-Stop, Connector and so on |
|
Roller conveyor for pallets :
It is designed to transport empty or full kegs. The rollers are driven by means of a chain wheel.
Application: For all usual types of pallets.
Speed: Up to 400 mm/s. |
|
Our most cost effective standard conveyors are flat belt, twin belt, chain, flat top chain and roller types.
From these standards we can normally find a modular solution to a special requirement. |
|
- Very quiet System
- Weak Maintenance
- Common Motorization to some extent right and curve
- Accumulation weak push
Conveyers with rollers ordered by countershaft and round belts
- Frame made out of flanged sheet 25/10ème, Gray completion Epoxy RAL 7035 or blue 5002
- Rollers steel zinc coated Ø50, hexagonal pin 11 mm on dish, 2 throats
- Motor reducers under the apparatus, supply voltage: 220 - 380V. Speed fixes 10,15,20,25m/minute
ON REQUEST
Transfer, push rods, obstinate pneumatic, brake of zone, other dimensions,
shifting of speed
Accessories (foot, guidance, thrusts, etc) are to be ordered separately. |
|
| Accumulation conveyors are used to control the flow of unit-loads. They can be controlled mechanically or electrically, can be contacting or non-contacting, and can provide low-pressure or zero-pressure accumulation. Typical applications are to create/manage material buffers before downstream handling or prepare loads on multiple conveyors prior to metering or inducting into a sortation system. The application of the conveyor equipment best suited to the task ensures it is used to its peak capabilities. |
|
- Connection on STANDARD element of conveyer TRL
- Curve with double lines of cylindrical rollers
- Rollers zinc coated steel or PVC Ø50mm, Axis 8mm
- Frame 50/10ème, gray completion Epoxy RAL 7035 or blue 5002.
- Interior Ray: 800mm
- Not of the rollers on average radius: 75mm with 86mm
Accessories (foot, guidance, thrusts, etc)
are to be ordered separately. |
|
Pallet Transport Devices :
REO PACK offers a complete range of equipment for pallet transportation, all produced in the REO PACK factory and tailor made for a specific application.
The control system can be within a stretchwrapper control system or separate.
The range includes: roller, chain, slat and belt conveyors, turn and lift tables, pallet lifts and chain crosses and transfer shuttle cars. |
|
Connection on standard element TRL and TRC
Folded sheet metal chassis 20/10ème
- Rollers zinc coated steel or PVC Ø50mm,
center 8mm at spring
- Assistance with lifting by compass gas and handles
- 1 articulated adjustable foot
- Useful Passage 800mm
On request other dimensions
mechanized length, width, rollers |
|
General
A proven and tested modular system for individual pallet changer designs, manufacturing cells and F.M.S. Systems. Equally suitable for new machines as well as the upgrading of existing installations.
Application
Suitable for all machines on the market including vertical turning machines, measuring machines, as well as individual solutions for pallet changers and manufacturing cells.
Construction
All units in this modular system are produced from high quality materials and workmanship. The drive, switch and control elements are quality-approved articles for performance confidence. Installations incorporate a self-contained hydraulic system where required.
Pallets
Can be furnished according to DIN, ISO or Factory Standard. Other manufacturers pallets can also be transported.
Control
Systems are provided with basic controls to facilitate pallet changes. Cell scheduler and cell controllers are also available. Systems are supplied to customer requirements or with suitable interface to suit existing system and OEM requirements.
Installation/Commissioning
Systems are supplied with necessary foundation hardware. Our skilled personnel will commission the installation or provide turnkey solutions if required. |
|
In partnership with Accalon of Sweden, we offer a full range of pallet conveyor systems. Conveyor systems are the highways of warehouses and distribution centers, allowing continuous material flow and a universal interface to all kinds of material handling equipment and manual operations. If designed to peak requirements, variations in the flow can be handled easily and efficienty.
Our range of pallet conveyor products is based on a modular design, securing the benefits of economy in manufacturing and simplicity in installation. We can fulfill all the conveying and handling requirements of your system - a full range of powered roller and chain conveyors is available, along with other conveyor products such as shuttle cars, pallet dispensers, turntables, profile guages and vertical conveyors.
Complete range of pallet conveyor:
Chain conveyors, straight linked duplex chains for minimal wear of load carrier
Chain conveyors with 2 strands or multiple strands to suit the load
Roller conveyors, pitch, width and rollers to suit load requirement and throughput
Gravity conveyors, including stop and separation units
Transfer units, chain/roller, roller/chain, or chain/chain
Turntables with roller or chain conveyor
Pallet/salve board dispenser
Vertical conveyors, single or multiple loads
Shuttle cars, single or multiple loads - high speed version
Roller conveyor, chain converyor or fork shuttle
Profile gauges - high throughput version
Intelligent pallet control - checks the pallet and, if unsatisfactory, automatically dispenses and places a slave pallet/board under the bad pallet |
|
|
|
