|
|
Description
Rotating union for swiveling or slow rotation speed, for low mechanical stress.
Fluid being conveyed
All fluids and vacuum (to be specified on request)
Operating conditions ( temperature, pressure and speed) being interdependant, the application limits indicated in this
figure can not be combined simultaneously
|
|
Rotating union designed for high pressure and slow rotation speed.
Max. pressure (in Bar) From 450 Bar up to 600 Bar according to diameter
Materials
Tube and body in chromium steel, deep treated and coating with zinc
in a dichromate bath
|
|
|
Rotary Systems' entry level 90 degree swivel is designed for the hose reel industry. This economical swivel uses a hardened and ground shaft and impregnated Teflon seals. The 001 series is able to withstand high pressures, moderate speeds and low side loads.
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
|
|
|
|
Connections which give all freedoms of movement, with safety and reliability....
Revolving articulations GANYMED are used for the transport of all types of fluids or gas between a fixed point and a mobile point. By their capacity of rotation, the facility of installation, reliability and the lifespan, these articulations revolving GANYMED are a relevant solution for many applications,
The main features are:
- Rotation: until speeds of 10 turns per minute.
- Diameter of passage: DNN 20 with DNN 700.
- Pressure: vacuum with 700 bar
- Temperature of the fluid: of -50°C with + 225°C
- Sealing: by PTFE joint,
- Construction: with ball bearings integrated
- Connection: male threading, threading female, supports, connection for welding...
- Material of manufacture: Steel (42CrMo4) or stainless steel (1.4571).
Products very neat, manufactured in Germany, available on stock, prices very competitive.
Applications: Chemical process, loading arm, treatment of water, agro-alimentary and pharmaceutical process, energy....
MCPI is the sole distributer in the French-speaking countries of the company HAAG + ZEISSLER
Contact: mcpimail@mcpi.fr
|
|
BALL-SWIVEL PLUG
- The plug swivels for greater manoeuverability!
- Offers a 53° conical range of motion for greater operator comfort
- Allows an airflow of up to 2,095 LPM (74 SCFM)
- Maximum Air Pressure: 6.2 Bar (90 PSIG)
|
|
Developed originally as part of the TODO-MATIC® coupling construction then subsequently as a stand alone product, the TODO® swivel has proved itself in the toughest applications for over 20 years.
Used mainly to allow free hose movement without imparting torque stresses to the assembly (one of the biggest causes of premature hose failure).
# Simple design, low maintenance
# Very compact
# High flow rate / low pressure drop
# Full range of sizes, materials and connections
# Stainless steel bearings and single 'O' ring seal for realibility
|
|
Technical Description
Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. Depending on design, the body is made of brass (TDG) or steel (TKR) and the rotating axis of surface-purified/stainless steel.
Maximum rotation speed: 60 r.p.m.
Advantages
Rotating joints minimise the high wear to the hose, which occurs in hydraulic systems. Solid construction with two plain bearings (TDG) or ball/roller bearings (TKR). Suitable for combining with norm hydraulic components.
Working Temperature*
-20°C up to +100°C (NBR)
depending on the medium.
FKM on request.
|
|
STENFLEX swivel joints are used in applications involving liquid and gaseous media. The swivel joints can be used as flexible pipe connectors under the most demanding conditions and can withstand extreme temperature and pressure.
STENFLEX swivel joints are highly suitable for absorbing oscillations. Swivel motion can be handled as well as complete rotation at low speed.
|
|
Air Logic offers a selection of Swivel Fittings with an O-Ring Seal located above the 10-32 UNF threads. The addition of this bottom seal guarantees a leak-free connection. Three barb configurations are available: Swivel Elbows, Swivel Tees, and Straight Swivels.
The unique design (Patent # 4,496,204) allows the barb to swivel 360° in the threaded base. Nylon or Polypropylene fittings are available with Buna-N, Ethylene Propylene, Silicone, or Viton o-rings.
|
|
|
The Swivel Fittings are ideal for a broad range of medical, industrial, laboratory and instrumentation applications involving pneumatic systems. Swivel Fittings are available with 10-32 UNF, 1/8-27 NPT, or 1/4-18 NPT threads. Three models are available, Straight Swivel, Swivel Elbow and Swivel Tee. The unique design (Patent # 4,496,204) allows the fitting to swivel 360 degrees. The snap type fitting is sealed with a Buna-N, Viton, Silicone, or EPDM o’ring. All models are available with barbs for 1/16”, 3/32” or 1/8” I.D. flexible tubing. The absence of a molded parting line on the first barb guarantees a leak free seal.
|
|
| ... products without technical information |
| |
|
|
