|
|
Viking Pump presents its innovative LVP Series stainless steel Vane Pump. With 14 Bar (200 PSI) thin liquid capability, and capacities up to 36 M3/Hr (160 GPM), the new LVP pumps are designed for corrosive, thin liquids at higher pressures than other positive displacement pumps. Exceptional performance, advanced durability, application flexibility, ease of installation, and ease of maintenance helps users realize enhanced productivity, and a lower total cost of ownership.
The LVP Series is a true, industrial-duty product with exceptional performance for corrosive, low viscosity liquids. Designed to minimize life-cycle costs, its 62 Rockwell C surface-hardened stainless steel casing reduces casing and vane wear. Its standard chrome oxide coated shaft and silicon carbide bushings are extremely hard and long lasting. Its PEEK® vanes offer high strength, low friction for less wear, and broad chemical compatibility. Its maintenance-friendly design allows complete draining and easy vane or seal replacement without removing the pump from its system.
The LVP series is available in a metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, or with ANSI flange ports, NEMA motor mount, and inch-standard seals, and can be foot mounted. |
|
KT6C SELECTED highest pressure and utmost RPM vane pump
Intensive pressure:350bar
Continuous pressure:275 bar
Maximum RPM:3000RPM
Displacement:21.3/26.4/34.1/37.1/46/58.3/63.8/70.3/79.3/88.8/100
Application:
Ocean going and Marine equipment, construction equipmnet
Scrap balers equipment, Construciton equipment, oil explortion
machine, Oil exploration equipment, presses and shearing machines
* Installation dimensions compatable with Dension pump
|
|
DVQ-20 low noise, excellent performance high pressure pump
The maximum pressure can reach 270 bar
Displacements: 17, 23, 26, 32, 38,44
Apply to:hydraulic press brake, shear, bending and steel sheet forming machine.
* Installation dimensions compatable with Atols pump |
|
| Two-stage electric and petrol pumps for mobile industrial tools. Very lightweight (25 kg) high pressure (720 bar) pump. |
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors, joined with hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control valve for single acting cylinder, pressure gauge remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor cabinet with shut-off valves, hose extentions and other accessories available on request.
|
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump make up one jack SET with two or four machine jacks. |
|
¡ oil-free
¡ up to 150 bar
¡ absolutely gas-tight
¡ compressed air and gas
¡ ATEX-conformity
¡ air- or water-cooled |
|
| ... products without technical information |
| |
| Larox Flowsys Oy is manufacturing reliable and functional pinch valves to process industries worldwide. Larox valves are well suited for shut-off and control applications involving abrasive or corrosive slurries, powders or any other types of materials that can lead to packing and hardening at the valve. Various sleeve, actuator and valve body materials are available to handle a wide range of fluids and materials. The standard range of Larox Valve solutions is for diameters 25 mm - 1000 mm, temperatures -50 C - +160 C, and pressures 0 - 100 bar. |
|
Application
- as cartridge
- as modular valve
Shut-off valves are used for manually
opening and closing a channel. They
can also be used as drainage valves
against the tank line.
Shut-off valves are suitable for bidirectional
flow. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Faucet with floating sphere 2 parts
DNN (Nominal Diameter): 4-200 (other diameters and pressures on requests)
PN (Pressure rating): 6-160
TECHNICAL MAIN FEATURES
- Execution: A105, ISO, ANSI 515 or AISI 316
- Can be gone up with all types of actuators
- Connection of the actuators Iso 5211
- Anti-static
- Direction of the fluid in the two directions
Technology: Forged
Principle: 2 parts
Markets:
Chemistry
Hydroelectric
Oil/gas
Connection: With flanges
Type of connection:
- THUS
- PN/ISO
Passage:
- Integral
- Reduced |
|
Faucet with shaft sphere
DNN (Nominal Diameter): 25-800 (other diameters and pressures on requests)
PN (Pressure rating): 6-420
TECHNICAL MAIN FEATURES
Execution: A105 or 316L
Double floating seats
Gaskets anti-blow of ram and replaceable
Triple seals
Anti-static
Fire-resistant according to API standard 6 FA/API 607/BS6755
Circulation of the fluid in the two directions
Technology: Moulded or Forged
Principle: Shaft sphere |
|
Valve doubles beating between flanges
DNN (Nominal Diameter): 50-1200
PN (Pressure rating): 10-420
Protector of circuit industrial Generals, hydrocarbons and of process
TECHNICAL MAIN FEATURES
Assembly between-flanges
Excel hydraulic output
Compactness
Sealing ensured by an excellent distribution of the force of spring on the leaves guaranteeing a good support on the seal of the seat
Weak pressure losses
Progressive opening controlled by spring at double dot of support
Leaves stainless or bronzes
Vulcanized Joints NBR gorges some on the seat
Horizontal and vertical operation ascending
Technology: Moulded
Principle: Double leaf |
|
Valve valve
- DNN (Nominal Diameter): 15-300 (other diameters and pressures on requests)
- PN (Pressure rating): 10-420
Technology: Moulded or Forged
Principle: Valve
Markets:
- Chemistry
- Hydroelectric
- Oil/gas
Connection:
- Has flanges
- To weld
- Tapped
Type of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO |
|
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
NV 50 is an isolator for integration into platforms with attachment options on one side wall or at the bottom. The is fixed with the centrical load rod. In consequence of the prismatic basic shape these isolators can be integrated in substructures of vibration-sensitive instruments and are ideal to use as OEM-elements.
If an installation in the inside of the instrument is not possible the dampers can be masked with an optional available blind made of polished stainless steel. The NV 50 hold brilliant isolation features in the lower frequency range despite the low contruction volume of about one liter.
The resonance frequency lies horizontal under 2 Hz and vertical at 2 Hz. The levelling range is +/- 3mm and can be set up with the height controllers HR2. A permanent supply of compressed-air is necessary. |
|
The NV150 air-springs are the pneumatic isolators for the cplusw damping tables and are inserted into their base frame.
But as an OEM-product the NV150 can be used in many ways. Because of an upper stopper of the piston the design offers a maximum safety against an accidentally compression overload.
A permanent supply of compressed air is necessary for operation as well as a compression or rather a height controller for setting up the working height in between the levelling range of +/- 4mm The resonance frequency is about 1,7 Hz in horizontal directions and in vertical direction under 2,5 Hz.
CplusW offers support for system integration into customer products or special applications. Sets composed of three, four or even more NV150 air-springs will be delivered with the necessary number of height controllers HR2.
NV150 systems do not need any special maintanance after the initial setup. |
|
| LPP peristaltic hose pump is a new innovation in the world of peristaltic pumps. It is capable of handling the heaviest, most abrasive and aggressive slurries in mining and process industries as well as high viscosity fluids in hygienic and foodstuff applications. The completely new operating principle and the advanced adjustment mechanism give LPP extremely long hose life. The clever operating principle also allows LPP to operate continuously at high speeds and flows without overheating. The unique hose fixing system with reliable flanges at both ends of the hose enables secure and fast replacement of the hose. LPP can be easily installed in-line, because of its smart construction. The high flow capacity LPP makes a smaller pump size possible and the pump requires less space compared to the conventional peristaltic pumps. LPP saves energy and produces economic value in production and cost efficiency by reducing maintenance and upkeep costs. Currently LPP pump family consists of three sizes DN 25, DN 40 and DN 65 for working pressure max. 10 bar with flow capacities up to 20 m³/h. LPP can also be equipped with a sophisticated control unit. Taylor made solutions are available outside the standard product range. |
|
Larox Peristaltic Pumps for Dosing
The innovative Larox Peristaltic Pumps for Dosing (LPP-D) set a new industry standard for peristaltic pump technology. Designed and manufactured for the industrial marketplace, they are ideal for pumping diverse slurries and dosing a wide range of media. |
|
| The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar). |
|
| Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available. |
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and
servicing hydraulic systems up to 420 bar, 6000 psi. The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination. |
|
The RFIK mechanical hydraulic tester provides the ideal solution for servicing and commissioning
hydraulic circuits on agricultural and other mobile machinery.
The kit comprises of a direct acting flow indicator with built in thermometer, a loading valve and a pressure gauge all built into a strong steel case with a removable lid.
The unit is self contained and requires no electrical power. The dials are clear and easy to read.
Installation is extremely simple and the test kit can be connected into either the pressure or return lines. The loading valve and pressure gauge allow a progressive build up of system pressure in complete safety.
The test kit provides the service engineer with quick, accurate and simple performance testing of pumps, motors, valves, cylinders and complete hydraulic
circuits.
Note: This unit is not designed for permanent installation. |
|
|
