|
|
|
|
|
|
Heavy duty process horizontal pumps, radial split, centerline supported, single entry overhung impeller.
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability.
Back pull-out construction for easy maintenance procedures.
Choice of multiple impellers for optimum efficiency over a wide operating range. Coverage consists of more than 100 different hydraulics.
Twin volute configuration to minimise radial loads and shaft deflections (over 2" discharge nozzle size).
Centerline feet mounting for high temperature stability.
Bearing bracket geometry optimised in order to definitely eliminate water cooling system, even for high temperature applications (400°C).
Casing, bearing frame and baseplate enough stiff to assure minimum shaft deflections under heavy nozzle load conditions (extended life for seal and bearing).
Wear rings and balance holes optimised for an extended life under the most adverse suction conditions (duplex angular contact or roller thrust bearings applicable).
Bearing housing intrinsically contamination free, even in case of mechanical seal failure.
A wide range of sizes and material combinations complete the variety of the offered product.
Main design features
Designed in a back pull-out configuration according to latest edition of API 610 std.
Fan cooling and/or finned bearing bracket.
Seals and sealing systems in accordance with API 682 std.
Baseplate overall dimensions according to API 610 recommendations.
|
|
Model: 50 T and 150T
running speed from: Max. 1800 L/min. Min. 900 L/min.
Max. Pressure from 70 to 105 kgf/cm2
Delivery flow at no load pressure: from 9 to 139.6 L/min.
Application: special for surface grounding machine and
rubber machines.
For detail dimensions, performance characterisics please
visit our web site: www.kcl.com.tw
|
|
DVQ-20 low noise, excellent performance high pressure pump
The maximum pressure can reach 270 bar
Displacements: 17, 23, 26, 32, 38,44
Apply to:hydraulic press brake, shear, bending and steel sheet forming machine.
* Installation dimensions compatable with Atols pump
|
|
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Series 610-One Stage Sewage Pump
- 3" to 6" sphere capacity
- All iron fitted pump
- Regreaseable bearings
- 100,000 hour average bearing life
- External impeller clearance
- Taper shaft at impeller
- Capacities to 20000 G.P.M (4542 M3/HR)
- Heads to 250 feet (76 Meters)
- Temperatures to 250°F (121°C)
- Discharge Sizes 6" (15.2 cm) thru 20" (50.8 cm)
Applications:
- Horizontal and Vertical
- Non-Clog Sewage Treatment
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting pressure/vacuum generators compressors with low maintenance and running costs. These pressure/vacuum generators operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filter and control valve, these pressure/vacuum generators can be fitted with other accessories without a problem. The blast air cooler, which is also integrated, guarantees a very low blast air temperature. The compact cover ensures low noise and heat emission. The combined pressure/vacuum generators are additionally equipped with a second intake. This provides the capability of making minor adjustments to the suction and pressure side as well as to high blast air volumes. By way of option, the second intake can also be used as a second low-vacuum suction air supply. Optional corrosion protection also makes these vacuum pumps suitable for extracting moist air.
|
|
Overview
- High Pressure; Low noise; highly efficient
- Single, double, triple, and thru-drive pumps
- Industrial and Mobile pumps
- Design allows for cold start-ups
- Speeds to 3000 RPM
- MPS's for Different Displacements are available
|
|
The P2000 rotary pump is specifically designed for space constrained installations, or where a simpler belt-driven design is preferred. The P2000 rotary pump is available in two different designs :
Inboard roller bearing configuration with single mechanical sealing for duties involving lubricating liquids, such as Fuel Oils, Vegetable Oils, Lube Oils, and Additives.
Inboard plain bearing configuration with gland packing for duties involving non-lubricating liquids, such as Molasses, Resins, and Polymers.
|
|
|
|
|
|
Viking Pump presents its innovative LVP Series stainless steel Vane Pump. With 14 Bar (200 PSI) thin liquid capability, and capacities up to 36 M3/Hr (160 GPM), the new LVP pumps are designed for corrosive, thin liquids at higher pressures than other positive displacement pumps. Exceptional performance, advanced durability, application flexibility, ease of installation, and ease of maintenance helps users realize enhanced productivity, and a lower total cost of ownership.
The LVP Series is a true, industrial-duty product with exceptional performance for corrosive, low viscosity liquids. Designed to minimize life-cycle costs, its 62 Rockwell C surface-hardened stainless steel casing reduces casing and vane wear. Its standard chrome oxide coated shaft and silicon carbide bushings are extremely hard and long lasting. Its PEEK® vanes offer high strength, low friction for less wear, and broad chemical compatibility. Its maintenance-friendly design allows complete draining and easy vane or seal replacement without removing the pump from its system.
The LVP series is available in a metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, or with ANSI flange ports, NEMA motor mount, and inch-standard seals, and can be foot mounted.
|
|
JABSCO Hy∼Line Rotary Lobe pumps are robust, durable machines designed for long life in demanding applications. Modular construction, using interchangeable parts, enables pumps with a wide range of seal, port and rotor configurations to be built and motorised on short lead times.
Features::
• Flow rates up to 108m³/hr (30 litres/second)
• Pressures up to Up to 15bar (220 psi)
• Temperature range: -40ºC to +140ºC
• Liquid viscosity range: 1 to 1,000,000 centipoise
• Hygienic - approved to American 3A standard
• Gentle pumping action suits viscous, delicate and particle-laden liquids
• Easy to clean, easy to maintain
• AISI316 stainless steel construction
|
|
Flow rate: 7.9 USgallons/min (29.9 Litres/min)
Self-priming from dry up to 1m (3ft)
Features:
• Meets USCG 183.410 & ISO8846 Marine (Ignition Protection)
Specifications:
Body Bronze
Rotor Vectra
Vanes Ryton
Seal Nitrile Lip Seal
Shaft Stainless steel
Port Type 1/2" NPT Female or 1" (25mm) Hose barb
Voltage 12 Vdc
Amp Draw 8 amp
Fuse Size 15 amp
Motor Intermittant duty permanent magnet type with reversing switch
Duty Cycle 30 minutes at 10ft (3m) at 86°F (30°C)
Weight 5 1/2 lb 2.5 kg
|
|
Rotary vane vacuum pumps, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
Rotary vane pumps, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
|
|
Advantages:
- high water vapour tolerance
- high reliability
- low weight
- small dimensions
- quiet running
- high pumping speed
- optimal ultimate pressure
- easy to service
- low maintenance
Ranges of application:
- ideally suited for use in the laboratory
- freeze drying
- process engineering
- backing pump for turbomolecular pumps, root pumps, etc.
|
|
DRY
Tough, compact construction
Minimum maintenance
Excellent heat dissipation
Capacity from 2 to 25 m3/h
Maximum vacuum level 700 mmHg (92% vacuum)
DRIP-FEED LUBRICATION
Minimum oil dispersion
Low noise and vibration free
Capacity from 2 to 150 m3/h
Maximum vacuum level 720 mmHg (95% vacuum)
Available with total loss lubrication, for all applications in which the intake air contains a high percentage of harmful liquids or gasses
OIL BATH LUBRICATION
Oil bath lubrication combined with a new design release reservoir that ensures silent operation and the complete removal of oil spray
Capacity from 20 to 300 m3/h
Maximum vacuum level 759 mmHg (99% vacuum)
|
|
DIESEL SELF PRIMING PUMPS MA-A SERIES
Rapid priming, good solid passage and medium/high flow rate are the most important features that distinguish our diesel self priming pumps.
|
|
Features
- Four cover orientations, two choices of tank ports
- Less leakage points
- Durable cast-iron structure
- Space saving - only 2.8 inch longer than standard pump
- Popular standard cartridge valves
- Modular pump design
Benefits
- Quiet, reliable, long life and consistent high performance overlife
- Cost savings
- Installation labor savings
- No need for sub-plate for valve mount
- Eliminate hose/pipe connection between pump and valves
- Easy maintenance/repair
- Flexible installation
|
|
PUMPS
We offer all types of hydraulic pumps - gear, vane and piston pumps, applied in stationary and mobile machines.
Pumps of the following types may come as one- and multi-section pumps. To supplement the pumps we sell, we also offer a wide range of connectors and couplings.
We also offer repairs of the pumps we produce.
Primary performance data:
Operating pressure:
gear pumps - up to 25 MPa
vane pumps - up to 16 MPa
piston pumps - up to 28 MPa
Capacity:
gear pumps - up to60 cm3/rev.
vane pumps - up to 100 cm3/rev.
piston pumps - up to 100 cm3/rev.
|
|
Single Pumps
These pumps are of high pressure and high performance, which have been developed especially for low noise operation. To comply with a variety of applications including injection moulding machines, PV2R series single
pumps provide the output flow of such a wide range as from 5.8 to 237 cm3 /rev (.354 to 14.46 cu.in./rev).
The intergral driving parts of the pumps are combined into a kit form and available for supply as a cartridge kit.
Therefore, the replacement of the driving parts can be done easily.
Double Pumps
These double pumps consist of two PV2R series single pumps combined in tandem within a single housing anddriven by a common shaft. A Single suction port and two discharge ports are provided so that the output flow can be supplied to separate circuits.
|
|
|
The U2000 rotary pump is specifically designed for systems or processes where infinitely variable flow from 0-100% of the rated pumps capacity is required. The U2000 achieves this with a variety of Control Types,without the need for speed variation devices, bypass lines/loops or control valves. Our patented Constant Pressure Control (CPC) pump will operate against a closed valve.
|
|
|
|
|
|
The various designs and ultimate pressures of R 5 type pumps allow the pump to be easily and optimally adapted for any process. R 5 type vacuum pumps are designed for continuous operation in industry and have been successfully used for many years in various applications.
Compact design, air cooling and easy access allows rapid and simple servicing with long periods between service. 0.1 mbar to 20 mbar covers every rough vacuum application. No preventative maintenance apart from routine oil and filter change is required.
Features
* Ultimate end pressure of 0.1mbar (previously 0.5 mbar)
* Increased suction capacity at low pressures
* Reduced model variants
* Same price as old model
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in various industries such as Packaging, Chemical & Pharmaceutical Industry, Plastic, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy, Remediation and many more.
|
|
The R 5 Compact range of pumps shares the same design features as the R 5 standard range, but they are optimised for use in applications and machines where space is limited.
They also inherit the wide operating range, easy adaption, continuous operation and excellent operating record of the R 5 range and their compact design makes them easy to service.
No preventative maintenance apart from routine oil changes is required.
Features
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in Packaging, Chemical & Pharmaceutical Industry, Plastics, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy and many more.
|
|
The cutter pumps of the series SFC are capable of cutting aluminum chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction.
Axial / semi-open impellers
Large chips
25 ... 1800 l/min
4 ... 35 m
|
|
MultiStream Pumps with adjustible single-channel impeller
MultiStream-pumps are suitable for handling effluent or sewage in municipal and industrial pumping stations as well as in surface water drainage applications. The smaller types are also used very successfully as portable units to deal with emergency situations. The sewage pumps UAK are suitable for handling water without faeces. In hazardous locations or in case the pumps are connected to the public sewerage we recommend our explosionproof sewage pumps UFK
Recommended for:
- effluent which contains fibrous matter
- mixed water
- effluent which contains solids
- rainwater
- raw effluent
- raw sludge
|
|
DOUBLE VANE PUMPS
FOR PRESSURES UPTO 320 BAR (4650 psi) AND
SPEEDS UPTO 3600 RPM
DISPLACEMENTS- 12.5 TO 540 CC (0.75 TO 32.80 cu.in)
|
|
For industrial & mobile applications
- From 18+18 c.c./rev to 195+118 c.c./rev
- Very high pressure up to 275 bar
- With flow regulating and pressure limiting valves
|
|
Pfeiffer Vacuum is committed to innovation. It was in this spirit that we developed the new PentaLine™ rotary vane pumps for your applications
in the low- and medium-vacuum range of down to 10-3 mbar.
The optimized drive system that is used in these pumps affords you
cost-effectiveness that is convincing and environmentally friendly. The approximate 50 %
Space-saving and hermetically sealed – the innovative PentaLine™ is super clean and requires only little maintenance. Both man and machine benefit equally from these New Generation rotary vane pumps. As a
further innovation, they incorporate a motor concept that makes them easy to deploy anywhere in the world. The PentaLine™ pumps run extremely quiet and with a minimum of vibration.
|
|
Hypro's turbine pump is a high-capacity, low-pressure spray pump that is designed specifically for tractors with a 1000 rpm PTO. The 9600C is built using a heavy-duty cast iron body and glass-filled Valox impeller for wear resistance. The shaft is stainless steel and the lip seals are Viton® for corrosion protection.
The 9600C is a direct drive pump for high-volume spraying or liquid transfer applications. The pump features include large 1-1/2" ports, a 15/16" shaft with 1/4" keyway. Heavy-duty sealed bearings are used for longer life in agricultural spraying applications.
|
|
Features :
- Self priming to 7 1/2 vertical feet (2.3m)
- Maximum head of 23 feet (10 PSI) (.7 bar)
- Liquid temps from 40ºF (5ºC) to 185ºF (85ºC)
- Thermal overload protection
- Stainless steel shaft
- BUNA-N impeller and lip seal
- Built-in reverse switch and 8 foot cable with battery clips (3000-350 only)
A variety of uses for these pumps has been made possible by the use of a Buna impeller for applications in pumping water to changing oil in cars, trucks, farm equipment and machinery. Pumps incorporate thermal overload protection. The premium model includes a built-in 3 position switch to simplify flow reversal. Dual ports, 3/4" male garden hose and 3/8" NPT (F).
|
|
Hale Floating Pumps
Hale's Fyr Flote and Super Chief pumps are designed especially for the fire services to be highly portable and easy to use. Able to draft in as little as four inches of water, they can be easily used with alternative water sources such as streams, lakes, or pools. They are designed for easy maintenance with a tough long lasting outer shell.
|
|
Goulds Model 3640 API 610 (BB2) between bearings radially split double suction two-stage process pumps are designed for smooth, reliable operation, and meet the toughest specification requirements of API-610 to assure extended service life.
Specifications:
Capacities to 1500 GPM (340 m3/h)
Heads to 1400 feet (425 m)
Temperatures to 850° F (455° C)
Pressures to 750 PSIG (5170 kPa)
Design Features:
Opposed Impeller Design - Balances axial loading
Large Shaft Diameter - For low shaft deflection and stable rotordynamic performance
Radially Split Design - Dependable casing sealing for high temperature process pump applications
Rugged Mounting Flanges - Designed to meet API-610 nozzle load requirements
Between Bearings Design - Improved rotor stability at high speeds and heads
Centerline Mounted - For high temperature services
|
|
|
|
