|
|
APPLICATIONS
* FOR DOMESTIC SYSTEMS AND SMALL IRRIGATION SYSTEM
PRESSURISATION.
* HANDLING OF NON AGGRESSIVE CIVIL AND INDUSTRIAL LIQUIDS.
* FOR WASHING SYSTEMS AND FOR INSERTION INTO COMPLEX
INDUSTRIAL MACHINERY AND LINES.
* FOR ANY APPLICATION REQUIRING A SELF PRIMING SYSTEM.
DESIGN ENGINEERING
* SEALED MOTOR WITH EXTERNAL VENTILATION AND FINNED ALUMINIUM
ALLOY CASING
* IP 44 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX PUMP LIQUID TEMPERATURE: 50°
|
|
|
Selfpriming monoblock water pumps with open impeller. The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean or slightly dirty water and in flood irrigation systems.
|
|
Features:
* Self priming to 7 1/2 vertical feet (2.3m)
* Maximum head of 23 feet (10 PSI) (.7 bar)
* Liquid temps from 40ºF (5ºC) to 185ºF (85ºC)
* Thermal overload protection
* Stainless steel shaft
* BUNA-N impeller and lip seal
* Built-in reverse switch and 8 foot cable with battery clips (3000-350 only)
A variety of uses for these pumps has been made possible by the use of a Buna impeller for applications in pumping water to changing oil in cars, trucks, farm equipment and machinery. Pumps incorporate thermal overload protection. The premium model includes a built-in 3 position switch to simplify flow reversal. Dual ports, 3/4" male garden hose and 3/8" NPT (F).
|
|
TRIPLE VANE PUMPS
FOR PRESSURES UPTO 300 BAR (4350 psi) AND
SPEEDS UPTO 2500 RPM
DISPLACEMENTS-24 TO 560 CC (1.45 TO 35 cu.in)
|
|
Parker CK cartridge kits are used in the PFVI and PFVH series fixed displacement vane pumps for application on mobile and industrial hydraulic equipment. These cartridge kits are completely assembled and tested for quick and cost effective service of the pump in the field.
The CK**PFVH (mobile) is a 10 vane cartridge designed to meet the higher operating pressures and shaft speeds of mobile equipment and the CK**PFHI (industrial) is a 12 vane cartridge designed for use in the quieter in-plant environment. Flows from 5 to 60 GPM @ 1200 RPM with operating pressures to 3000 PSI can be achieved.
|
|
|
|
|
|
Self-controlling vane pumps type PSV
Special features: Long service life due to hydrodynamic, spherically located friction bearings
Low tolerance between adjustment and spacer ring = minimal oil leakage
Almost constant oil leakage over the compete pressure range due to hydraulic play compensation
Technical specifications:
Installation position: Unrestricted. The pump drive shaft must not be subjected to radial loads.
Operating temperature: To prevent corrosion, the oil temperature in the tank should not exceed 55°C.
Suction: 152 mm HG
76 mm with aqueous fluids
Operating pressure: Max. 140 bar
Pressure limits: A pressure control valve should b e used with pressures in excess of 100 bar, as this would guarantee higher service life of the pump with high pressure peaks.
Direction of rotation: The SV pumps are available with clockwise and counter-clockwise rotation. The respective direction of rotation is marked by arrows located on the side of the pump housing. The direction of rotation is seen from the end of the shaft.
Pressure fluids: HLP - Mineral oil i.a.w. DIN 51525
Filtering: to ensure long service life of the pump, a return line filter with a mesh of at least 1 my is recommended. Suction filters should not be used.
|
|
Vane pumps, fixed displacement
Types PVV, PVQ:
- Sizes 18 to 193
- Low operating noise
- Low flow pulsation
- Suitable for wide speed and viscosity ranges
- Combination of several pumps possible
- Can be combined with axial piston pumps and internal gear pumps
Vane pumps, direct operated
Type PV7...A:
- Sizes 10 to 25
- Very short control times
- Low operating noise
- Lower zero stroke power
- Mounting and connection dimensions according to VDMA 24 560/1 and ISO 3019/2
- Good efficiency
- Pump combination possible
Vane pumps, pilot operated
Type PV7:
- Sizes 14 to 150
- Variable displacement
- Low operating noise
- Pressure and flow can be controlled
- Controller actuator can optionally be locked
- Low hysteresis
- Very short control times
- Pump combination possible with standard pumps
- Mounting and connection dimensions according to VDMA 24 560/1 and ISO 3019/2
|
|
Corken CD-Series Coro-Vane® pumps produce a maximum differential pressure of 125 psig (8.6bar g). Corken manufactures four sizes of Coro-Vane pumps, ranging from 20 to 400 gpm (4.5–90.9m3/hr). These pumps can handle discharge pressures up to 400 psig (27.6 bar g). They are designed for light liquids with viscosities below 10,000 SSU.
Product Features
* Compact size
* Exceptional in light liquid & liquefied gas transer
* High pumping efficiencies throughout life of pump
* Can handle small amounts of vapor
* Suction lift
* Vanes are self adjusting
* Modularity throughout pump line
* Years of service
|
|
|
|
|
|
R 5 special products are designed for use in the following special situations:
* high water vapour - Aqua
* high oxygen concentration - Oxygen
* explosion risk - Enivac
R 5 Aqua
These pumps are designed for use in humid applications and processes that contain a high percentage of water vapour. Aqua type vacuum pumps are characterised by reliability and minimum maintenance. The standard version of the Aqua type vacuum pump is equipped with a recirculation oil lubrication system, which results in considerably lower oil consumption compared to with once – through lubricated vacuum pumps. No water is needed for operating.
R 5 - Oxygen
Used in all industrial processes with increased oxygen concentration such as modified atmosphere packaging of red meat or chicken. Injection of higher oxygen concentration is a common and frequent process in packaging of meat products. This ensures a controlled maturity and sterilisation of the meat.
The R 5 rotary vane vacuum pumps in oxygen execution have been specially designed for pumping gases or gas mixtures with more than 21% oxygen content, thereby ensuring highest process reliability.
R 5 Enivac
Enivac pumps are explosion – proof rotary vane vacuum pumps. They can be used in industrial applications to pump explosive gas/air and vapour/ air mixtures. They are suitable for pumping almost all group IIB3 gases as well as fuel vapours. Enivac vacuum pumps are certified in accordance with directive 94/9/EC (ATEX 95) FOR USE IN Ex II 1/ 2 G IIB3 T4, Category 1 inside and outside the pump
|
|
|
The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application.
|
|
|
|
|
|
C.R.I. Peripheral pumps are one among the unique products from the home of C.R.I., the pumps people having an unsurpassed engineering expertise of over 4 decades. C.R.I. products are engineered to perfection with utmost care and stringent quality control at all stages to ensure longevity and trouble free service.
Volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellows mechanical seal made of carbon and ceramic is fitted over the shaft, which is ground to close tolerances. Self priming models have built in check valve on the suction side which requires no foot valve. The brass inserts provided inside the pump casing reduces wear & tear and this give longer life and prevent the pump from seizing if it is kept idle for long period. Pumps are powered by a totally enclosed fan cooled, A.C. Induction two pole motors suitable for continuous duty. Motor stator is made of low watt loss steel laminations. The windings are of high grade enameled copper wire and are varnish impregnated. Dynamically balanced rotor ensure vibration and noise free operations. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal protector (motor protector) is incorporated in all single phase motors. These pumps require an adequate motor protection control panel.
|
|
|
|
|
|
|
C.R.I. peripheral pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellows mechanical seal made of carbon and ceramic is fitted over the shaft, which is ground to close tolerances. Self priming models have built in check valve on the suction side which requires no foot valve. The brass inserts provided inside the pump casing educes wear & tear and this give longer life and prevent the pump from seizing if it is kept idle for long period. Pumps are powered by a totally enclosed fan cooled, A.C. induction two pole motors suitable for continuous duty. Motor stator is made of low watt loss steel laminations. The windings are of high grade enameled copper wire and are varnish impregnated. Dynamically balanced rotor ensures vibration and noise free operations. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal over load protector (motor protector) is incorporated in all single phase motors. These pumps require an adequate motor protection control panel.
|
|
* Doubled walled stator design eliminates need for a universal joints or coupling rod.
* Available in Cost effective, portable-closed coupled (Motorised) design or Bare shaft design for flexibility of use of drives e.g. Mechanical speed variators, Diesel engine etc.
* Can be adopted for solar power motors.
* Suitable for metering, dosing with 90 to 95 % accuracy.
* Ideal Pump for the European Market, especially U.K.
Fluids Handled / Applications
Domestic – Cellar Drainage, Septic tank cess pit emptying, Garden sprinkler systems irrigation, Water supply sampling from wells, streams and rivers.
Industrial – General purpose pump for Diesel, Lubricating Oil, Water Based Inks, Vegetable Oils, Plating Solutions, Other Non-Aggressive Chemicals. . Non corrosive liquids with medium viscosity e.g. Fuel oil , Thin Molasses, Fluids with suspended solids e.g. Dirty water from cesspools, Domestic water transfer, Hot water circulation.
|
|
|
|
|
|
The rotator pump calls colloid pump , trefoil pump , sole pump etc., which are widely used in food and beverages, chemicals, pharmaceutical industries. Due to the unique shape of the pump rotor and high accuracy requirements, it has few successfully produced domestic manufacturers. Many users only have to buy imported equipment. To change this negative situation, Secretary technical research staff in our company. Use C language to have worked out rotator curve layout procedure and have input which into the processing center to make precision process. The key components of the pump to ensure the consistency of the high-precision requirements and strict requirements.
Model TRA Cam rotor pump is designed by Boao based on traditional TR pump, to make which superior performance more beautiful ,higher efficiency . Structure : it adopts integral coupling assembly ,which can make the machine more compact(length can be shortened 100-250 mm) and save occupying area .It is covered with stainless steel, mirror polishing, good appearance, high grade ,no occurrence of dropping.
Brief application of a pump rotor:
-Beverage categories : dairy foods, latex, chocolate syrup, cheese wort, beer, soft drinks
-Fruit concentrates : pudding, jam, jelly, tomato sauce
-Paste products : fats and oils, etc.
-Facial cosmetics, detergents, hair gel, aromatic oils, etc.
-Drug categories : Extract, emulsion, pills pulp
-Chemical Industry : dye, fat solvents, and polymer resin
|
|
|
|
|
|
General description
HINDHIVAC "FD" Series Rotary Pumps are designed to address the needs of all the major requirements like research as well as industrial applications.
Raw Materials are chosen keeping in view of continuous pumping requirements. Pressure tight, special grade, fine grain castings & high carbon steel for internal parts are hardened and ground to close tolerances. These ensure noise and vibration at negligible minimum levels. Compactness and minimum oil charge are the highlights of the design feature.
These Rotary Pumps have a gas ballast facility to pump most condensable vapors without any notable oil contamination. An anti-suck-back facility prevents oil entering the system in the event of pump being switched off due to power failure. An integral Oil pump ensures lubrication and sealing to build high vacuum.
These Rotary Pumps find application in the area like Impregnation, Nuclear particle study, Electronic Tube evacuation, Lamp manufacturing Industries, Air conditioning and Refrigeration, Freeze Drying, Gas circulation, vacuum forming, Filtration, Metalizing, Distillation, Vacuum Metallurgy, etc.
|
|
The BOZP model self priming pump is used to pump liquid whose level is below the inlet of the pump and deliver the fluid matters containing gas. Its pump shell , cover and vane are made of high-grade stainless steel 304 or 316L; the motor is equipped with stainless steel shield, the inner surface adopts mirror polishing, coarseness Ra: 0.28um, outer casing adopts wiredrawing treatment, completely according to GMP standard .
Application
Mainly used to deliver the liquid containing of gas in fields such as pharmaceutical, alcohol, food, chemicals, beverages etc. and also used as a return pump in on-the u2013 spot CIP cleaning system, and used for liquid delivery that need high pressure filter.
|
|
| ... products without technical information |
| |
|
|
