|
|
CHIMIE SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
ISO EN20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
HYPALON SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
ISO EN20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
|
Rangeboot BG S3 for oil industry leather full flower with sole: PU2D, textile sole antiperforation, end: Lightspace composite.
|
|
Cut resistant boot aimed at forestry experts working with chain saws.
Class II protection and S3 version against impacts and puncture.
|
|
To cope with unpredictable situations: very uneven and dirty ground, frequent changes of workplace, difficult climatic conditions.
Cross-country walking type safety boot of original design, with a 200J steel toe and a midsole of pierce-resistant steel.
Upper in finest quality leather with brown water-repellent pull-up finish, with an ergonomically designed reinforcement in TPU at the front and back to make it more robust and give longer life
J-ESCAPE Outsole:
- Progressive shock absorber to protect the back and joints from vibration and impact.
- Resists contact heat up to 300°C
- Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
Standard: EN 345-1 S3 HRO.
Sizes: 38 – 47 (5-12)
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
HERCULES
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
Lining
|
|
Responding to the need for comfort and flexibility, together with resistance to hydrocarbons and abrasion, in especially harsh working conditions.
Safety boot that has become the oil industry standard since it was created.
Its natural full grain AP 23 leather is oil and water-repellent. The specific curing process makes it flexible, breathable and long-lasting. It is 10% thicker than most other leathers and its resistance to water vapour is three times greater than the regulations in the EN 344 standard ( 180 mn / 60 mn )
Dual-density SOFTANE walking sole:
- Inert to contact with oils and hydrocarbons
- Antistatic
- Featuring the progressive heel shock absorber to protect your back and joints from shocks and vibrations
Standard: EN 345-1 S3
Sizes: 4 – 13
|
|
D1-9000 D1-9000 S2 / D1 9000 S3
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: leather
Lining: warm fur
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
|
|
Polyurethane boot / S-00 - warm lining green
COD: EN 345-1 SB : XS00-G11-02
EN 347-1 : XS00-G11-00
Homologation: EN 347-1 /EN 345-1 (SB o SBP)
Upper: PU
Lining: warm lining
Sole: TPU rubber
Sizes: 36/47 (347) 40/47 (345)
Weight: Gr 2200
Packing: each pairs in one box// 5 pairs per carton
Characteristic: High protection against cold (CI). Extra large steel toe cap resistant to 200j (SB) steel midsole (SBP) wide last for the best comfort. Shock absorbing in the heel area, resistant to acids and hydrocarbons
Norms: EN 345 (SB SBP) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: For cold stores, agriculture and skiing station
|
|
Upper: Low density PU
Sole: High density PU
Sizes: 37 – 47 (4-12)
Standard: EN 345-1 S5 CI
200 Joule steel toe and midsole
Removable cleanable insole, anti-odour and anti-bacterial.
Sanitized® treated
Antistatic
Plus:
30% lighter than a standard boot
Heat insulated
Exceptionally long life
Absorbs the energy of impact to the heels 25% better than a standard boot
Resistant to industrial oils and hydrocarbons
Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
|
|
S-00 food industry warm lining / White
COD: XS00 W11 02 (EN 345-1 SB )
XS00 W11 00 (EN 347-1)
Homologation: EN 345-1 / EN 347-1
Upper: PU
Lining: Warm lining
Sole: TPU rubber
Sizes: 36/47 (347) / 38/47 (345)
Weight: Gr 2200
Packing: each pairs in polybag // 5 pairs per carton
Characteristic: High protection against cold (CI). “Extra large” steel toe cap resistant to 200j(SB). Wide last for the best comfort. Shock absorbing in the heel area. Resistant to oils, hydrocarbons and animal fats (ISO 6112-92).
Norms: EN 345 (SB) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: cold stores, food industry
|
|
Upper: Antibacterial treated PVC
Sole in two materials: Antibacterial treated PVC and 100% Nitrile
Sizes: 36 – 47 (3-12)
Standard: EN 345-1 SB E
Steel toe 200 Joules
Absorbs the energy of impact to the heel
Plus:
Slip-resistant sole. Adhesion coefficient 53% higher than the requirements set in the standard
Better abrasion resistant Nitrile sole
Boot completely and easily washable
Polyamide lining
Completely smooth upper for easier washing because dirt does not build up
Protects the ankles
|
|
Great for environmental clean ups, concrete plants, poultry and meat packing and other applications requiring heavy duty protection.
- Made with ozone resistant material
- Traction grip soles
- 100% waterproof
- Over the shoe design
- Cotton lining
|
|
Code L 4493/2
Upper Microfiber, white color
Lining white color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes
Steel toe cap 35 to 48
Composite material toe cap 35 to 47
Safety categories S2, S3
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
MIX GUMMI S5 tuttacoscia / Green-Black
COD: EN ISO 20345:2004 : A05 G1 N0 01 21 (S5)
Homologation: EN ISO 20345:2004
Upper: PVC nitrile
Lining: Polyester
Sole: PVC Nitrile
Sizes: 39/48
Weight: Gr 2300
Packing: each pairs in polybag// 6 pairs per carton
Characteristic: “Extra large” steel toe cap resistant to 200j.
Steel midsole. Wide last for the best comfort.
Shock absorbing in the heel area. Antistatic, antislippery.
Resistant to oils and hydrocarbons.
Norms: EN ISO 20345:2004 issued by CIMAC Vigevano (Pv) Italia
Use: industry, building, agriculture and breeding.
|
|
For professionals who work in wet places - fishermen or water-treatment or sewage services.
Upper: High resistance PVC
Sole: PVC / Nitrile
Waders: PVC covered canvas. High frequency heat welded.
Total length 80 cm. Waist straps.
Sizes: 39-48
Standard: EN 345-1 S5
Toecap: 200 J steel. Liner stab-resistant steel
Antistatic
PLUS:
Ankle-bone protection
Heel shock absorbers
Reinforced instep for better protection and longer life
Heel tab
Structured sole to give good grip on greasy or loose ground, built up for better resistance to shock at the front.
Self cleaning treads
Resistance to hydrocarbons
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
ARTEMIS
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
|
|
| ... products without technical information |
| |
|
|
