|
|
|
|
|
|
The In-Line Automatic Sampler
A Primary Cross-Cut Sampler is most often installed in place of a section of spouting and can be either a 90 or 45 degree model. As material flows through the sampler, a "pelican" type diverter, with an opening in the leading edge, traverses the stream and extracts a representative sample. The "pelican" remains in the rest position, under a seal and OUT OF THE MATERIAL STREAM, until an automatic/manual signal is given to collect another sample. Frequency of travel is controlled by a timer in the control panel.
Sample Divider
A Mechanical Divider receives the "sample" by gravity from the primary sampler. Then it passes through a continuously oscillating swing valve that reduces the "sample" and distributes it into a 1, 2, or 3 sample adapter. Dividers are manufactured in four models--MD 100, MD 200, MD 300, and the MD 1000, and use is determined by the flow rate, installation, and frequency of the samples. Excess sample is returned to the material stream.
Automatic Controls - Sealed and Locked
A Control Panel controls the operation of the primary sampler and mechanical divider. A digital integral timer is used to control the frequency of travel of the "pelican." Panels can be built for individual control or for control of multiple sampling systems.
Collection Systems
Collection cabinets come in a totally enclosed, sealed bagging unit, an enclosed hopper cabinet, or a sealed automatic indexing jar sample collection system.
|
|
The PLATE HANDLER can be used for different applications. The first development is to automate the colony counting with COUNTERMAT FLASH or Flash & Go.
Built-in Bar code reader: The bar code reader stops the rotating movement when has got the information. This information could be used for identification purposes as well as to give orders to the counter.
Compact carrousel: The Petri plates are stacked in a carrousel that contains up to 80 (four columns of 20). The carrousel is taken from the incubator and installed in the unit. The Petri dishes can have a bar code label to be identified. If they do not have a bar code label, the position of the Petri plate in the column and the column itself are used as identification.
Automated counting: The PLATE HANDLER can be used for different applications. The first development is to automate the colony counting with the COUNTERMAT FLASH or Flash and Go.
|
|
Integrated Gel-excision processor
Xcise, is the first instrument developed by Shimadzu Biotech and Proteome Systems Ltd.
Xcise combines the functions of gel acquisition imaging, protein spot cutting and digestion, peptide extraction and deposition onto a MALDI target plate in a single integrated benchtop instrument, Xcise offers a number of unique features.
|
|
|
Bristol ISOLOK® Liquid Slurry Samplers are designed specifically to take representative composite samples from tanks, pipes and other vessels.
|
|
|
Bristol ISOLOK® Powder Samplers are designed specifically to take representative composite samples from tanks, pipes and other vessels.
|
|
The Casella VOC Pro is an ideal tool for rapid VOC detection and monitoring in air, water and soil.
The Casella CEL VOC Pro Photoionization Detector is ideally suited for undertaking rapid surveys for organic vapours for both indoor or outdoor applications for all monitoring and survey applications
|
|
|
|
|
|
TriPlus™ Autosampler
The new TriPlus Autosampler is the most flexible platform conceived for modern analytical labs.
Product Detail
Merging robotic technology for vials and syringe operation, with advanced controls of the three dimensional space movements of the syringe holder (XYZ), the new TriPlusTM Autosampler is providing larger flexibility in sample capacity for high lab productivity, while still delivering unprecedented lab automation.
Now available with Solid Phase Microextraction (SPME)* capability for further laboratory productivity by offering a one-step process for sample preparation without requiring hazardous solvent usage. SPME is a novel solvent-less sample preparation technique, involving extraction, concentration and introduction of analytes in a single step.
Automate two GC or GC/MS systems at once for ultimate productivity. The TriPlus Autosampler is also now compatible with other manufacturer GCs and data systems.
The ability to independently serve multiple GC platforms for higher productivity is just one of the unique values delivered by this new Thermo Scientific premier product.
All TriPlus movements are step-by-step controlled ensuring reliable operations for thousands of samples. The same controls permit automatic alignment procedures and self-recognition of all available accessories (solvent stations, bar code readers, incubation heated oven, vial tray holders and type) making for quick installation of the autosampler and easy start-up.
|
|
Cylinder sampler for accurate samples of gas and two phase liquids.
Flow through design assures representative sample
Self-sealing quick disconnects for easy removal and transport of sample cylinder
Outage tubes or volume reduction vessels for prevention of over pressurization
|
|
Please choose the type of Liquids application you are interested in:
Liquid Samplers for Pipes
Liquid Samplers for Tanks
Liquid Samplers for Mixers
Liquid Samplers for Reactors
Liquid Samplers for Sanitary Applications
Sentry manufactures both automatic samplers ("autosamplers") and manual samplers for all types of liquids and slurries. We have samplers for liquids that are toxic, corrosive, high temperature, and/or high pressure as well as for food-grade liquids such as milk, juice, cream, etc. Water and steam sampling and analysis equipment can be found by clicking here.
|
|
|
|
|
|
HiVol 3000 High VOlume Air Sampler
The HiVol 3000 Particulate Sampler provides a flexible platform for remote unattended sampling of particulate matter and basic meteorological parameters.
The HiVol 3000 incorporates electronic volumetric flow control and advanced programming functionsinclusing optional wind speed and direction attachments to capture other meteorological parameters.
- Sampling at PM2.5, PM10 and TSP is available
- PUF and XAD versions available
- Wind direction conditional sampling such as fence line monitoring
available
- Advanced active volumetric flow control system automatically corrected
to standard reference temperature 0°C, 20°C, and 25°C and 1 bar (STP
conditions)
- RS232 output for data collection and networking
- Internal data logging of WS/WD, temperature, pressure and flow
- Weather-proof marine quality anodised aluminium cabinet
Ecotech MicroVol 1100 Low volume air sampler
The MicroVol 1100 is suitable for both indoor and/or remote/outdoor applications. Particulates are size selected and collected on a sample filter for gravimetric analysis.
- Portable, quiet, low flow particulate monitor
- 12VDC power source allowing it to be powered through mains power, optional battery pack or solar panel
- Ideal for use indoors for both commercial and private use
- Samples at three levels PM10, PM2.5 or TSP
|
|
The AS 100 OEM Autosampler uses a simple and reliable drive mechanism to provide automated sample introduction, enabling you to perform other tasks while the system is operating. The AS 100 autosampler automatically introduces up to 1536 samples when loaded to maximum capacity. It contains a microprocessor that allows sequential or random sampling, providing analytical flexibility.
Standard Features
- One year OEM warranty on parts and labor but lifetime application support from Aurora Instruments Ltd.
- Intelligent XYZ movement for effortless compatibility
- Dispensable reagent volume of up to 1000mL, selectable increments of 1mL
- Sampling capacity of up to 192 sample cup/test tube (0.5 to 10ml) sample racks.
- Compatibility with standard solvent extraction test tubes, ICP test tubes, micro plates and custom made trays
- Compact size - footprint is 558W x 220D x 308H mm
- Aurora integrated manufacturing, service, and support ensure quality, on-time delivery, and quick response
|
|
|
|
|
|
XSIZE™
Automatic Sampler
Takes samples during blending or mixing operation
The XSIZE automatic sampler from Dynamic Air Inc. has been designed to take almost any sample size automatically during a blending or mixing operation. It provides a method to take samples at any point in a process system for verification of dry bulk materials. Fabricated from all 304 or 316 stainless steel construction, it can be programmed to take a sample upon demand at predetermined times as required.
The XSIZE automatic sampler is designed for mounting directly on a mixer, discharge chute or any place in the process desired. Samples are then collected in a standard commercially available clear plastic container. Removal of the plastic container is simple and done manually. Special features include a highly polished, 304 or 316 stainless steel feed screw and a powerful 220/440 volt motor and drive assembly.
Features
- Highly polished stainless steel feed screw
- T.E.F.C. 220/440 volt motor and drive assembly
- Custom feed rates
- Programmable
- Made to fit most standard clear plastic jars
- Air operated isolation valve
- Simple mounting arrangement
|
|
|
Introducing GPCmaxTM, the world’s first integrated pump, autosampler and degasser module specifically designed for GPC/SEC applications. It mates seamlessly with Viscotek's Triple Detector Array, Viscotek's Dual Detector or a simple concentration detector to form a complete GPC/SEC system.
|
|
|
The BioCube System SX is an enclosed platform with a 4‐axis robotic arm that moves around the workspace. The BioCube System SX is compact and perfectly suited for laboratory automation processes that do not require our largest deck configuration.
|
|
Sampling of powdery and pelletized products out of the product stream in gravity pipes or hoppers at normal atmospheric conditions or over/under-pressure range (max. 1 bar).
Design Characteristics
- Compact housing of weld stainless steel construction
- Connection flange according to DIN 2501
- Piston of stainless steel with PTFE slide ring seals. Piston volume approximately 0,05 ltrs. or 0,2 ltrs.
- Electro-pneumatic equipment, complete with pipework
|
|
As far as sampling is concerned ITECA SOCADEI proposes a complete solution of automated sampling. You can automatically take a matter sample directly flow, ensure its homogenisation by the rotating homogenisation hopper, its transport towards to the analysis laboratory and its storage. This technology makes it possible to ensure a representative sample taking entirely automotive in all of your control points. With this technology you will be able to guarantee a better quality of your production and will be more reactive in the flow pollution event. Its use is largely widespread in particular in cement factories, pets foods, free lime factories, carbonate of calcium manufacturers, loading of cereals, PVC...
|
|
The Spin Air is the ultimate instrument for air sampling.
Its special design of the holes combined with slow rotation of the plate allows using 100% of the surface compared with the 5% of the still devices.
|
|
|
|
|
|
Microbial Air Monitoring
Sampl'air® Impactor superior performance yet ISO 14698 validated
Determination of the microbiological quality of air is vital in a number of sites such as areas where pharmaceuticals and medical devices are manufactured, operating theatres and other critical areas in hospitals and food processing facilities.
Sampl'air air samplers (Lite and Pro versions) enable the microbial monitoring of the air through impacting microorganisms onto a standard Petri dish.
The new generation of Sampl’air units offer you superior performance combined with ease of use
High Accuracy and Reproductibility
- Total traceability (Pro version only), CFR 21 part 11 compliant software and direct connection to a printer
- Secured sampling
- Electronic speed and flowrate auto control
- Battery load indicator and secured cycle start not allowed if battery power not sufficient to complete a cycle)
- Individually tested with its grid installed, comes with a control certificate
- ISO 14698-1 compliant and validated: Superior Collecting Performance tested by the Health Protection Agency (UK)"
The new Sampl’air air sampler has been evaluated according to the ISO 14698 standard by the UK Health Protection Agency (HPA) in Porton Down. The Institute said in its conclusion: “The results of the physical testing of the Sampl’air were very consistent and the standard deviations were of a low order for aerobiological studies... ... the Sampl’air should be capable of collecting over 99% of particles occurring in this environment (Whyte et al 2007)”.
|
|
General description:
The battery-operated air sampler works according to the impaction and filtration method. The device detects polluted air. The air sampler is primarily applied in hospitals, for the manufacturing of medical equipment as well as in foodstuff production.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 