|
|
| ... products without technical information |
| |
... see all the products in the category
Labware
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully industrial temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
B&B Thermo-Technik is specialized in the production of gas analysis probes. Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Manufacturer of humidity sensors
- Thermocouple manufacturers Connectors suppliers
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Professional transmitters |
|
Bühler Unheated sample gas probe with shut off cock and in-situ filter
For dust concentration up to 200g/m³, no condensate containing gases
For hazardous areas, no internal ignition point
Technical Data:
Material: 1.4571, industrial ball valve 1.4408
Professional seals: PTFE/graphite/1.4404 and see filter element
Operating temperature: max. 200°C
Max. working pressure: 6 bar
Order information: Base unit:
GAS 222.30 p/n 4622230
Options:
To customize the base unit to meet the needs of any application, please refer to data sheet DE461099 "Accessories for Gas Sample Probes”.
Unheated extensions
Professional filters
Calibration gas port
ANSI flange 3"
Manufacturer of pneumatic actuator
Blowback
Blowback control unit |
|
The gas sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes for the gas analysis.
Unheated, heated, explosion proof and portable versions are available.
Due to its modular design the gas sample probes can be adapted to nearly all process conditions.
. |
|
Bühler Heated sample gas probe with downstream filter and weather protection shield
Filter can be replaced without tools
Effective insulation and protection shield
Self-regulating up to 80°C
Dust concentration up to 2g/m³
This probe is approved for use in Zone 1, 21 and for gas sampling from Zone 0, 20 (hazardous areas)*.
Technical Data:
Material: 1.4571
Professional seals: Graphite/1.4404 and see filter elements
Max. working pressure: 6 bar
Max. flow 1000 l/h
Max. inlet temperature process media 135°C
Voltage: 230 V, 50/60Hz
or 115 V, 50/60Hz
External circuit-breaker Type C:
2A for 230 V, 50/60Hz
3A for 115 V, 50/60Hz
Ambient temperature -20 to +50°C
Temperature: self-regulating approx. +80°C
Ex-marking of the basic unit *:
1GD / 2GD T4 T130°C
Order information: Baise units:
GAS 222.20 Atex 230V p/n 4622220X2
GAS 222.20 Atex 115V p/n 4622220X1
Options:
To customize the base unit to meet the needs of any application, please refer to data sheet DE461099 "Accessories for Gas Sample Probes”.
Various probe tubes
Unheated extensions
Industrial filters
Calibration gas port
ANSI flange 3"
* Please note that installed accessories may change the approved category of the probe. (Regard type plate and operating instructions) |
|
| The Clif Mock sample probe was the first truly isokinetic sampler available for crude oil sampling and is still the most accurate and reliable method for extracting a sample from a pipeline for BS & W analysis. Designed to be used with C-22 Isokinetic Professional samplers, the CD20 drive units are available in four configurations and are capable of pulse counting, timing, pacing from computer and sending out a "loss-of-signal" alarm. In the last few years, there has been increasing demand for much more elaborate systems. These CLIF MOCK True Cut™ systems commonly have multiple receptacles for separate products or batching operations and have controllers, which interface with central computer systems. |
|
| Automatic measuring and control systems ensure the right water quality in modern professional water treatment. All required functional elements are mounted on the sampling stations ready for connection. Due to the great variety of our products we are able to supply the appropriate sampling station for each application. |
|
Milk, yogurt, jam, syrup, ketchup...when it comes to food production, you can’t be too careful with your samples.
Our unique steamable design makes it impossible for residues to hide and survive.
In combination with our aseptic system you can even protect your sample against airborne contamination – all the way – while taking the sample and while moving on transporting the sample to the laboratory.
Important: All Keofitt® cocks complies with EHEDG and A3 requirements.
|
|
| ... products without technical information |
| |
| Sampling tap type PA/F, PN 16, body material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), glandless with bellows and safety packing, bellows and plug made of PTFE, cock industrial seat EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693) with PFA lining, epoxy coating, spring bonnet, pressure spring and nut and manufacturer of bolts made of stainless steel, valve actuation (lockable) with self-resetting lever, PTFE adapter for flange connection with thread to DIN 168 GL 45x4, face to face: DIN EN 558-1 basic series 1, ISO 5752 series 1 (DIN 3202F1), flange connecting dimensions: DIN EN 1092-2 type B, ISO 7005-2 type B (DIN 2533). |
|
SchuF produces one of the broadest ranges of sampling cocks available to the Refinery, Pharmaceutical, Fine Chemicals, Biochemical, Plastics and Polymer industries.
The cocks are most commonly used to simplify the extraction of samples from or the injection into tanks, reactors, or pipelines and allow for trouble free service over long periods of time.
The SchuF range includes: Type 30 (line sampling and injection valves), Type 31/33 (wafer sampling valves), Type 32 (screw in sampling valves), and Type 35 (submersed sampling valves).
|
|
| Sentry Equipment makes a variety of in-line, tank and closed loop sampling taps designed for safe, simple and accurate sampling. Needle or tube stub sample interfaces. Custom configurations to meet any process sampling need. |
|
| Top-Flo® sample cocks are specially engineered to be the finest in the industry and incorporate many features and benefits not found on other sampling taps. Top-Floreg; sampling valves come standard with minimal internal deadleg area designed into each valve, keeping hold up volume to a minimum for accurate samples every time. Right Angle or In-Line models can be supplied as main components (special bored cap and main body) to allow the user to fabricate their own size configurations on an as needed basis. Right Angle or In-Line models available from stock in sizes 1/2" to 4" clamp manufacturers end x professional hose barb. |
|
| ... products without technical information |
| |
Bühler Heated Sample Gas filter AHF - 22
The traditional design of heated particulate professional filters requires considerable maintenance and down time due to the work required to change the filter media.
Buhler’s AHF-22 incorporates a new advanced design that eliminates much of this work and sets new standards for ease and speed of maintenance. A spent filter can be changed in seconds and does not require dismantling the unit. Simply turn the handle 90 ° and the filter element slides out for replacement.
Depending on the application, the filter can be heated by self-regulating or controller-regulated cartridges.
Filter media are available in sintered stainless steel, ceramic or pleated stainless steel.
Robust and reliable design
Easy installation
Change filter element without tools or disassembly
Regulated or self-regulating heating
Optional calibration gas port
No cold spots |
|
ALMATEC pneumatic industrial diaphragm pumps of type AD 6 are a special development for laboratory applications and for sampling water from wells for continuous monitoring of the groundwater under landfills.
They have a maximum delivery volume of 250 l/h which can be infinitely varied by adjusting the air flow. AD 6 pumps are equipped with spring-loaded cocks and can therefore be installed in any position.
The housing is made of solid PTFE conductive. This material is resistant to corrosion by virtually all media. Its conductivity permits use of the pump in explosion-hazard areas and for inflammable liquids.
AD 6 pumps meet the ATEX requirements of the directive 94/9/EG.
|
|
Temperature-resistant and heated Diaphragm Manufacturer of vacuum pumps and Compressors supplier
Uncontaminated transfer of air and neutral, slightly aggressive gases and vapours at temperatures of 240 °C. Heating prevents condensation of gas. Versions with electronic temperature control.
|
|
The Compact pumps are used frequently in the fields of analysis and medicine.
CONCEPT
The Micro Diaphragm Gas Sampling Pumps from KNF
are based on a simple principal - an elastic diaphragm,
fixed on its edge, moves up and down its central point
by means of an eccentric. In this way the medium is
transferred using automatic cocks.
The range of KNF Micro Pumps is for the equipped with the patented stress-optimised structured diaphragm, resulting in a high pneumatic performance, a durable product and compact size. New, very efficient
valves and sealing systems as well as the precise placement of the pump head are some of the other technical features we can offer.
For pump drive we provide a selection of industrial dc motors with
various levels of performance, durability and price.
AREAS OF USE
KNF Micro Industrial diaphragm pumps are used frequently in the
fields of analysis and medicine.
For instance as pumps for gas measurement, for
example for sampling environmental conditions in the
workplace, or for exhaust gas and smoke analysis or
built into machines for measuring blood pressure.
As they are dc driven, the micro diaphragm pumps are
suited for use in portable and stand-alone equipment |
|
Ideal for:
-Air Sampling
-Gas analysis
-Liquid Agitation
-Medical Nebulizers
-Aerobic Industrial wastewater treatment
-Ozone Professional generators
-Sequential Compression Devices (Circulation Therapy)
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Custom OEM Models
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
The new Rapidox 3100 incorporates a powerful and silent linear piston pump manufacturers for remote sampling of gas. Connections are made using 6/4mm flexible tubing to the front panel input and output unions. The front panel includes a flow gauge allowing the user to control the rate of gas flow into the analyser from 0 to 4 litres per minute.
From the display to the outputs, all features are fully user-programmable using the keypad on the front panel. Easy to use and simple to calibrate using your choice of gases, the Rapidox 3100 offers exceptional performance and flexibility using a rugged, long-life zirconia o2 sensor. The Rapidox now comes with powerful Windows software for easy data-logging and graphing. Just switch on and start measuring...
-Bench mounted zirconia oxygen analyser with internal sensor & sample pump
-Rapid response long-life sensor
-Sample flow rate adjustable from 0 to 4 litres per minute
-Suitable for applications where the gas must be sampled remotely
-Gas is sampled through flexible tubing connected to the front of the analyser
-Perfect for analysis of room air or difficult to access locations
-Perfect for static gas applications
-Not suitable for hot gas analysis (i.e. >150°C at point of entry into analyser) |
|
The AVSPro automatic professional sampler is a fully automated measuring instrument for determining the viscosity of Newtonian fluids with capillary viscometers.
In spite of the high sample throughput, the AVSPro provides maximum accuracy and reproducibility and even allows unsupervised 24-hour operation.
The AVSPro automatic sampler works with the capillary method, which is the most precise method for determining the viscosity of Newtonian liquids in terms of physical chemistry. The great versatility offered by viscometers with optical and TC sensing systems opens up an extremely wide range of applications. This includes measurements of clear liquids as well as opaque petroleum products.
The main feature of the automatic unit is the three-axis positioning mechanism of the sample dosing system. The new X-Y-Z positioning mechanism allows parallel operation of up to eight viscometers in two thermostatic baths, which can be set at two different measurement temperatures.
Because of its large throughput capacity and its functional reliability, which it has demonstrated in the course of continuous practical operations, the AVSPro has proven itself to be an indispensable instrument for day-today utilization, particularly in the petroleum and plastics industries. |
|
|
|
