|
|
This type of machine is particularly suitable for shotblasting small parts loaded in bulk. A special anti-abrasive rubber mat arranged as a cradle receives the articles to be treated and with its movement maintains them in a constant tumble.
The articles are hit by the jet of abrasive generated by the turbine, and by continuously changing position, they receive the shotblasting treatment extremely uniformly on all the surfaces. A steel belt is recommended for all earth fusion materials and for all parts with weight exceeding 15 kg each
|
|
Tumble blast shotblasting machines are used for deburring, shot peening, surface cleaning of materials like aluminium, steel, stainless steel, brass and bronze. Available volume capacity of our standard models from 100 to 100 liters with loading charge till 3000 kg.
Our standard models are devided in TBG (version with rubber belt conveyor) and TBA (version with steel belt conveyour).
The machine can be equipped with automatic loading device with hydraulic operating skip.
|
|
These shot-blasting machines make it possible to treat the parts in bulk.
The movement of the apron retournor makes it possible to brew the parts under the jet of the turbine and thus to make sure that all the faces of the parts are exposed and treated.
The weak loads and the fragile parts are treated within an apron rubber (T-R), while the very heavy, aggressive parts with sharp or hot edges are treated in a steel steel deck (T-S).
The loading of the machine can be made by a skip and unloading by inversion of the direction of walk of the apron, on a vibrating conveyer or with band. The cycles are most of the time automatic.
Our standard range of apron shot-blasting machines retournor rubber includes capacities from 50 to 300 liters for loads going from 100 to 800 kg.
|
|
|
|
|
|
International Surface Preparation offers a wide variety of wheel blast equipment in several configurations. One of the more popular models of wheel blast equipment is a tumble blast unit.
Tumble blast machines are comprised of either a rubber or steel flighted belt that is driven within a mill, or cabinet, as the parts tumble beneath the blast wheel. Parts are batch processed in the tumble blast.
These units can are best suited for manual loading and unloading however loaders and conveyors can sometimes be utilized to provide for a semi-automated process.
Continuous tumble blast machines are available as well. These in-line units tumble parts through a tunnel by means of a rolling belt beneath a series of blast wheels.
Standard tumble blast machines range in size from 1 ½ cubic feet up to 12 cubic feet of operating capacity. Tumble blast models bigger than 12 cubic feet are available should your production require a larger machine.
International Surface Preparation can assist you with the proper selection of wheel blast equipment that best fits your processing and production requirements.
|
|
THM 300 – 700
The THM troughed belt shot blast machine is a universal machine which offers perfect processing results for bulk material als well as for complex, delicate individual work pieces.
GENTLE PARTS TRANSPORT
The patented transport system guarantees a gentle an uniform moving of the parts through the machine without impingement. Perfect blast results. The continuous rotation of the work pieces combined with a thorough blasting produces a uniform blast process with surfaces of highest quality. The THM also permits the blasting of thin work pieces.
|
|
|
Suitable for shotblasting of passing flat or single cross-section pieces without any limits of length. The pieces are treated on the upper part at 180°.
|
|
The tunnel type machine “NTOR” is a continuous shot-blasting unit with a special wear-proof steel wire conveyor.
The layout of the machine consists of a tunnel having the blasting room in the middle section. The 4 or 8 turbines are mounted above and below the belt conveyor, and are orientated in a way to ensure the perfect surface covering even for the most complex parts.
The final section of the tunnel is provided with a blowing system to remove the shots possibly remaining on the parts.
The machine does not require a pit, and is supplied complete with a self-cleaning dry cartridges dust collector.
|
|
For blasting different workpieces.
Equipped with pistol movement, number of nozzles.
Been suitable for pipes, plates, disks, etc..
|
|
ST 2500 B4500
Pass through sandblast facilities for large production capacities. With our conveyor belt blasting machines you are able to blast very quickly lots of your work pieces.
|
|
| ... products without technical information |
| |
|
|
|
|
The Textile Belt Analyser (TBA) uses high frequency radio waves to determine the integrity of fabric and solid woven belting and their splices. Discontinuity in belting can be such things as carcass rot, folds (created during manufacture), cuts and tears to the conveyor covers, as well as areas of delamination including at the splices. This minimises the possibility of an unpredictable belt breakage resulting in lost production byincreasing the reliability of the conveyor system.
The TBA Scanning system entails a trained technician to travel on-site and perform a full longitudinal TBA scan, condition inspection, cover profiles and life predictions of the conveyor belt.
After the inspection has been made a fully detailed report is generated and sent to the client. The report will include rEscan's recommendations in order of priority, detailed belt map, splice condition and a table of anomalies within the belt that are considered notable.
In the event that some of the anomalies need to be looked at closer, rEscan's portable X-Ray system can perform highly detailed digital images of these events.
|
|
|
|
|
|
CBS
The CBS is a mechanical switch which detects and prevents belt misalignment on conveyors. It reacts to the tilt caused by the misaligned belt. The CBS comes with 2 outputs - 15° and 30° - which trigger a first step alarm and a stop. The sensors are connected to a central monitoring unit, CB2V0A, which can control four sensors and triggers an alarm or stop signal and also provides a time delay.
The cylinders in contact with the belt are available in different options:
Mounted on a stainless steel bearing
-- stainless steel 304 or nylon cylinder
Mounted on shaft
-- nylon cylinder
The adjustable support is in stainless steel and allows a simple installation and adjustment of the sensors.
The advantage of this system lies in the fact that the force of contact between the cylinder and the belt is limited to the weight of the cylinder itself. This means that the cylinder is not damaged / cut by the belt even if they are in contact for a certain length of time.
The sensors are usually installed in pairs on each side of the machine.
ATEX certified zone 20 Ex II 1D Ex tD A20 IP 66 T125°C
|
|
|
|
|
|
Ramsey Conveyor Protection Switches
Protect your equipment, prevent accidents and reduce unscheduled shutdowns with Thermo Scientific Ramsey conveyor protection switches. Our switches are used for position information, for control signals, and to identify potentially hazardous situations with your process equipment. They utilize a rugged, heavy-duty design and are built to last.
Product Detail
The Ramsey Belt Misalignment Switch is used to monitor the position and tracking of conveyor belts. It is mounted on the conveyor structure and adjusted so the roller arm is the proper distance and angle from the outside edge of the belt. When a belt drifts out of alignment it contacts the roller actuator arm which rotates the actuation shaft, causing the belt misalignment switch to send an alarm signal.
The Ramsey Safety Cable Pull Switch is used as an emergency shutdown device for conveyors or other equipment. They meet OSHA and MSHA requirements for safety shutdown devices.
Safety pull cables are attached to the actuating arm of the switch. When force is applied to the pull cable it rotates the actuating arm and actuating shaft. At a 20° rotation the switch enters a tripped and locked position. The actuating shaft has two cams inside the housing. Each cam simultaneously actuates an independent SPDT micro-switch for shutdown and alarm signals.
The Ramsey Tripper Position Switch is a heavy duty limit switch. It is often used to indicate the position of a tripper on a conveyor with multiple discharge points. However, it can be used anywhere you need an extremely heavy duty limit switch with physical activation.
|
|
The Splice Monitoring System allows the remote measurement of splice elongation. The SMS monitors all types of splices in fabric conveyor belting by imbedding small targets into the belting at a set distance on either side of each vulcanised splice. No such targets are imbedded for mechanical clips.
The rEscan SMS system monitors these distances each time a splice passes its 'sense' transducer. This distance can be accurately measured and, should any splice fall outside set limits, rEscan can alert on-site personnel, who can then inspect the offending splice/s.
In addition, the system can be used to help identify if a clip has suffered severe damage and must be replaced.
|
|
rEscan's technology is the answer to the early detection of cord breaks, corrosion and splice failure.
The rEscan system works through magnetic flux leakage; steel cords are magnetized within the belting then measured for the amount of magnetic flux leakage seen in the belt. The key to this system is twin conditioning heads, which aligns all the magnetic domains thus giving a clean strong signal. The system is comprised of a set of two 'conditioning transducers (permanent magnets), one'sense transducer 'and one Tachometer.
As the belt passes by the transducer a signal is sent directly to a rEscan computer system then all data is reviewed on the belt in the Left, Center and Right orientation. Once the data has been analyzed, the rEscan Technician can accurately tell you where the damage is in your belt down to the closest millimeter in precision. "
|
|
|
|
|
|
Modular in design, ASGCO Weigh Belt Scale performs in a wide variety of conveyor styles and structures in English or metric. Versatile ASGCO Weigh Belt Scale installs in series to create a 2 or 3 idler weigh bridge - minimum of 2 load cells.
- Easy to Install - ASGCO Weigh Belt Scale which typically takes less than 2 hours for complete installation and start up!
- Virtually Maintenance Free - because its low profile minimizes build-up areas where dust and dirt accumulate.
- User Friendly Software Powers the ASGCO Totalizer - requiring input of only 5 field parameters before initial calibration.
- The Totalizer is Automated - because belt length and speed are automatically calculated and entered.
- Totalizer Provides a Wide Variety of Outputs - to drive printers, chart recorders, PLC devices and controllers.
- ASGCO Weigh Belt Scale is Simple - consisting of a speed sensor standard encoder - no expensive housings or assemblies
- A wide selection of Options are Available: wheel mount kit for speed sensor, cross tube kit for heavy duty / high belt loading applications, low capacity load cells for light duty applications and field wiring installation kits.
|
|
Conveyor beltweighers weigh and control continuous flows of bulk materials accurately and without inconvenient interruption.
Careful adaptation to the respective product characteristics is the basis for repeatable results.
• Flexible product range for almost all common belt widths; designs for use in legal metrology also available
• Adjustment, batching and loading control extend the field of application and provide optimized product flow and handling
|
|
|
|
|
|
The scale operates while the conveyor is in motion and is intended for the weighing of individual boxes, cartons, cans or -unpackaged products such as large cuts of meat. It is ideally suited to checkweighing, straight weighing and weight accumulation operations.
Fully automatic - Dual photo electric cell arrangement allows maximum accuracy in weighing randomly sized products. Excellent for feeding meat production lines or for checkweighing boxes, cans, cartons etc. Detect weight problems in-line.
Self-contained - Freestanding, self-powered design operates independently of existing belt conveyor. Unaffected by idler friction or belt tension and requires no damping device. Installs easily in new or existing facilities.
Stainless or carbon steel construction - Provides a cost effective choice based on material handling requirements. Stainless steel scales are matched with a stainless steel indicator to meet NEMA 4X standards for washdown and corrosion resistance.
Belting - USDA approved acetal flush grid with 31% open area for easy maintenance. Special belting available.
Weigh Bar accuracy and reliability - Weigh-Tronix patented weighbar design cancels out side, end and torsional forces to provide a true downward load. Fully electronic design eliminates moving parts that may be affected by wear or misadjustments.
|
|
Model S4a :
The belt conveyor scale of "S" line is a microprocessor based equipment specifically designed for industrial plant applications. Typical applications may be: Stock pile plant handling, belt feeder flow control, blending and batching systems.
MAIN FEATURES :
- No modifications to the conveyor structure
- Weighing area spans from 1 to 4 idler stations
- Pulse generating speed transmitter
- Optoisolated RS485 serial ports
- Optoisolated 4-20 mA flow rate output
- Failure alarm hardware output
- Optoisolation of all digital inputs/outputs
- Periodic self corrections of thermal drift
|
|
|
|
|
|
Ramsey Series 14 Belt Scale System
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System is specifically designed for high accuracy or basis-of-payment applications requiring certification by government and regulatory agencies. It is extremely accurate to within 0.125% and is the most widely certified belt scale in the world. It lets you monitor production output and inventory, or regulate product loadout, while providing vital information for the effective management and efficient operation of your business.
Product Detail
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System from Thermo Fisher Scientific is specifically designed for high-accuracy or basis-of-payment applications requiring certification by government and regulatory agencies.
The Thermo Scientific Ramsey Series 14 incorporates the Ramsey 10-14 low-deflection, full-floating unitized weighbridge and the Ramsey 61-12C Belt Speed Sensor. Both are well-proven on hundreds of precision belt weighing installations.
It also utilizes the Ramsey Micro-Tech 2301 or Ramsey Micro-Tech 3301 Electronic Integrator and the Ramsey 2301-D Load Cell Exciter/Digitizer, which are the products of 50 years of design and application experience with high-accuracy belt scales.
Applications
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System represents the world standard of accuracy and performance for loadout, inventory monitoring and fee-holder type applications requiring certification.
Certification
As the most widely certified electronic belt scale in the world, the Thermo Scientific Ramsey Series 14 has received its Certificate of Conformance in the United States as issued under the National Type Evaluation Program (NTEP) of the National Conference on Weights and Measures. Outside of the US, it is certified by OIML and EEC Class I standards.
Performance Guarantee
On factory-approved installations, we guarantee that the Thermo Scientific Ramsey Series 14 Precision Belt Scale System will weigh and totalize to a value within ±0.125% of the test load at flow rates between 25% and 100% of the scale system's calibrated capacity when calibrated against an actual weighed material test. Furthermore, we warrant that the scale system will repeat to within 0.1% of consecutively run, simulated calibration tests.
|
|
| ... products without technical information |
| |
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
|
Our brushing machine type BM 1138 has been constructed previously for heavy-duty conveyor belt cleaning in coal mines and foundries. Today we supply it for almost all kinds of industry where conveyor belts have to be cleaned.
|
|
|
|
|
|
MARTIN® Brush Belt Cleaners are specially suited for the removal of fines and residue from ribbed, flighted, grooved, or chevron belts. Versions are available to suit your conditions and your budget.
Motor-Driven Cleaning Action
One or two-horsepower motor (depending on belt width) turns brush against belt motion.
Match Cleaner To Requirements
Specify the cleaning system to suit your conditions and your budget.
MARTIN® Standard Brush Cleaner
MARTIN® Standard (Spiral) Brush Cleaner is value-priced answer to belt cleaning problems.
MARTIN® Strip Brush Cleaner
Uses 12 brush strips to form cleaner that sheds even moist material that would plug other brushes.
Brushes To Fit Need
MARTIN® Standard (Spiral) Brush Cleaner uses 0.38 inch (0.96 mm) polypropylene bristles wrapped in spiral around the hub. MARTIN® Strip Brush Cleaner forms brush from strips with 0.40 inch (1 mm) polypropylene bristles. Other materials and bristle diameters are available.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
Mink Vee-belt brushes (BKR) – Moderate prices and prompt delivery
Mink Vee-belt brushes are resistant to dust, dirt, moisture, oil, grease and common chemicals. Moreover, they’re ideal for use in small spaces. They can be supplied in both open-ended and endless versions. And because we know that you never like to wait, we keep the most important types in stock. They’re inexpensive and can be delivered promptly.
Advantages:
• Practical solutions for immediate use
• Extremely rugged
• Working temperatures: -15°C to +80°C
• Belt speeds up to: 20 m/sec.
|
|
|
|
see the results for the following category : 
