|
|
Sanders
The sanders are available in various models, suitable for metal finishing and woodworking applications.
Belt sanders
The Red Rooster belt sanders are suitable for nearly all materials, e.g. steel, aluminium, plastics and wood and for use as a de-burring method
in difficult access fettling applications. All belt sanders are executed with safety handle and adjustable silencer.
|
|
2FSM 2" Sander Multi-position vertical or horizontal
2" x 48" belt, Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5" contact wheel
Tilt work table, removeable platen
Full hinged OSHA guard for quick belt change.
Pre-set belt tension, one knob belt tracking.
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
Other products available:
|
|
S6MS, 6" belt sander
Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6" x 60" belt!
6" x 48" belt, variable positons, direct drive, 1 lever quick belt release !!!
Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
Reversible platen 6 1/2" x 14"
Cast iron work table 6" x 10" with 1/2" x 1/8" slot
Option: JIC controls
Model: S6 sander head only, less motor
Model: S6M-1 3hp, 1 phase, 220, LESS stand.
Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
Model: S6MS-1 , 3 hp, 1 phase, 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3, 3 hp, 3 phase, 220/440 volt, w/Stand
Model: S6MS-5 5 HP, 3 PH other features same as above.
Model: S660MS 6" x 60", 3 hp, other features same as above.
Other products available:
|
|
S612 & S612V Combination Sander With Vacuum !! 3 HP !!! Made in USA!!! 6" x 48" belt, 12" Disc, Vacuum Base
Available with OR without dust collector. 3HP 1PH 220 OR 3HP 3PH 220/440 volt. ( Specify voltage) Manual switch with overload protection.
Built in 100 CFM dust colletor base with cartridge filter.
Quick change belt, pre-tensioned one lever belt change...FAST !!
Models:
- S612-1 No vacuum, 1 phase/220 volt
- S612-3 No vacuum, 3 phase 220 or 440 volt
- S612V-1 Vacuum base, 1 phase/220 volt
- S612V-3 Vacuum base, 3 phase 220 /440 volt
Dimensions: L12" x W14" x H60", Weight: 500 lbs.
Specifications:
Belt Sander
Work Table- Cast iron 6" x 10" with 1/2" x 1/8" slot
Platen- Steel 6-1/2" x 14"
Belt- 6" x 48" - 2800 SFPM
Disc Sander
Work table- Cast Iron 8" x 14"
Disc- 12" aluminum disc, 5/8" arbor Speed- 2500 RPM
Other products available:
|
|
S14HW, 14" Wet Horizontal Belt Sander
Also available DRY !
Great for getting parts FLAT !!
14" x 103" belt
3400 SFPM
Steel platen 14-1/2" x 36"
Work surface 14" x 32"
Air tension on belt, 0-55 PSI reqd.
20 HP, 3 PH TEFC
Mag controls with jog, 24 volts at pushbutton
L 64" x W 31" x H 35"
Wt: 1900 lbs
Model: S14HW, 14"x 103", 20 hp.,220/440/60hz 3 ph. 24 volt at switch.
10 gal. coolant tank & pump.
Model: S14HD, as above, less coolant tank & pump.
Other products available:
|
|
|
|
|
|
Pneumatic Belt Grinders:
BSR 10 A
Technical Data:
Output: 185 Watt
Belt speed: 17 m/s
Band width: 10 mm
Band length: 330 mm
BSR 20 A
Technical Data:
Output: 295 Watt
Belt speed: 25 m/s
Band width: 20 mm
Band length: 330 mm
BS 6 N
Technical Data:
Output: 185 Watt
Belt speed: 18 m/s
Band width: 6 mm
Band length: 330 mm
BS 10 N
Technical Data:
Output: 185 Watt
Belt speed: 18 m/s
Band width: 10 mm
Band length: 330 mm
BS 20 N
Technical Data:
Output: 295 Watt
Belt speed: 42 m/s
Band width: 20 mm
Band length: 520 mm
BS 30 N
Technical Data:
Output: 515 Watt
Belt speed: 36 m/s
Band width: 30 mm
Band length: 540 mm
Benefits:
- Reversible (clockwise / counter-clockwise operation)
- Slight heat development and excellent grinding performance because the grinding belt is cooled during rotation
- High removal rate in a short period of time
- Fast and easy change of grinding belts without additional tools
- 3-point grinding belt support
- The grinding arm rotate through 360°
- Ergonomic design
- High grinding performance since the abrasive belt is cooled during rotation
- Abrasive belt can be exchanged within seconds
Areas of Application
For grinding and deburring jobs in mould making, container and machine building, foundries, metal and plastics processing industry, etc.
|
|
Model: HBS 1000 E
• Powerful 1010 watt motor
• Electronic speed for control and optimum results
• Clamping lever for easy, tool free changing of sanding belt
• Externally accessible brushes for easy replacement
• Control wheel for precise adjustment of sanding belt
• Compact design, ideal for sanding close to edges
• Die-cast construction for high strength and durability
• Dust extraction, with dust bag or absorption system
|
|
Dynfile® II Abrasive Belt Machine
- Grind, deburr, blend and polish
- Work on metal, plastic, fiberglass, composites, rubber, glass and stone
- Lightweight, 7° offset design. Grinding head pivots 360°
- Grind off contact wheel or platen pad. Finish & polish using slack of belt
- Also available in a Versatility Kit
|
|
Dynafile® Abrasive Belt Machine
- Grind, deburr, blend and polish
- Work on metal, plastic, fibreglass, composites, rubber, glass and stone
- Work in areas as small as 3/8" diametre
- Also existing in a Versatility Kit
|
|
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 5~70
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (KW) 37+30
6 Speed of Abrasive Belt (m/s) 20¡¢12
7 Abrasive Belt Size L¡ÁD (mm) 2620¡Á1330
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation ) (m/min) 6~20
11 Motor for Auto-feeding System (KW) 7.5
12 Elevator System for Work-table (KW) 1.5
|
|
| ... products without technical information |
| |
|
The BHS-Belt Filter can be used for separating sedimenting and abrasive solids from suspensions with little wear. The various filtrates are separated exactly and without intermixing. If required, the filter cake can undergo further treatment in the form of multiple reverseflow washing, suction drying or pressing.
|
|
Dual Belt Filters
These are sludge dewatering devices that apply mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned belts, by passing those belts through a serpentine of decreasing diameter rolls. The machine can actually be divided into three zones: gravity zone, where free draining water is drained by gravity through a porous belt; wedge zone, where the solids are prepared for pressure application; and pressure zone, where medium, then high pressure is applied to the conditioned solids.
Typically, a belt filter press receives a slurry ranging from 1 - 4 % feed solids and produces a final product of 12 - 35 % cake solids. Performance depends on the nature of the solids being processed.
Typical Applications:
- Food processing wastes
- Pulp & Paper wastes
- Chemical sludges
- Pharmaceutical wastes
- Industrial waste processing sludges
- Petrochemical wastes
|
|
Continuous belt filters Vacuum belt filters
Continuous belt filters are filters without auxiliary filter materials. Various filter fabrics are available for selection depending on the application.
|
|
PACT WGM have been engaged in the research and manufacturing of seperation equipment for 30 years and have supplied more than 3000 filter press units for more than 30 industries, including, chemical, metallurgy , and environmental protection industries. .PACT WGM makes and produces the frame, box , belt , and concentrating dewatering filter press. We can supply singular and entire equipment systems to customers.
CDYA and CDYC are advanced separating systems, which can operate continuously. They include, a driving system, a gravity dewatering system, belts, a washing belts system, guide rollers, an automatic protection system, a filter cake removal system, a pneumatic control tank, and an electric control panel
|
|
Working:
Dirty fluid is fed under pressure in to inlet manifold. It is distributed equally in 4 different plates. Filter papers clamped & supported between plates separate the dirt & form a layer (cake). This effects finer filtration. The same filter with pre-coating can add further to fineness of filtration.
Applications:
Suitable as centralized fine coolant filtration for finish grinding, filtration of high viscosity grinding fluids & filtration of honing oil with pre-coat arrangement.
Features:
Very large filtration area is accommodated relatively small dimensions. The unit shown is having 10 m2 filtration area.
Totally automatic pneumatically actuated operation.
Dirt is purged with compressed air to recover fluid.
Low initial & operational costs.
|
|
General description
HOFFMANN belt filters operate on the gravity filtration principle. Depending on the level of filtering required, filter paper with differing degrees of porosity are used.
These filters cleanse emulsions and low-viscosity oils used in machining of steel, castings, aluminum and other nonferrous metals. We recommend using stainless steel models when handling aggressive fluids, such as wastewater and chemicals.
|
|
|
We manufacture vacuum filters which use consumable filter paper for filtration. These vacuum filters can effectively handle viscous fluids up to 40 Cst. They require lesser space as dirty fluid tank and filter are together. They can easily be designed to handle much larger flows & dirt quantities. They use pump suction vacuum for filtration in addition to gravity head available. Pressure drop used is about 4 m of fluid column. Hence gathers more dirt layer to perform much better than all types of gravity filters.
|
|
| ... products without technical information |
| |
|
|