|
|
Grinders
Baldor's industrial quality, single and three phase, bench and pedestal grinders are available having wheel diameters of from 6 to 14 inches. This well known line also includes diamond wheel and carbide tool grinders and abrasive belt grinders. Some designs of the abrasive belt grinders are supplied with a three position tiltable belt. All these grinder products are backed by a three-year warranty.
|
|
|
|
|
|
Automatic Recessing Machine
Field of Application
The automatic CMU is designed for the precise and efficient grinding/polishing of concave and convex shaped parts (watch-jewels, industrial-jewels, lenses for watch glasses and wearing parts made out of hard materials such as sapphire, ruby, ceramics, tungsten carbide, etc.
Machine Description
The machine has up to three independent production units mounted on the same base. Each of these units is separately driven and controlled. They are centrally lubricated and supplied with coolant as well as vacuum required to automatically handle the parts. Each unit’s handling system uses two vacuum nozzles, one for loading and one for unloading.
An automatic parts measuring system and a tool-setting device checks each individual parts after machining and if required, adjusts the diamond tools wear (compensation). The diamond tool is a diamond grinding “pin” or “tube”.
The units operate automatically controlled by a cam shaft mechanism. It is a fully automatic process, including a parts counter – so to speak.
|
|
It is composed by 2 MANIPULATORS our mod.MINIROBOT:
- Self-teaching programming .
- 5 Axes with simple interpolation; the fifth axis has a continuos rotation.
- In front of the MINIROBOT MANIPULATORS are positioned two working units that can be GRINDING or POLISHING units.
|
|
Acme offers a wide range of traditional machinery for buffing and polishing applications:
- Universal Straight Line Conveyors
- Tangent and wide wheel buffing heads
- Conveyors up to 130' long
- High volume part production
Indexing and Continuous Rotary Machines
- Indexing machines from 2 to 16 stations
Standard Buffing and Polishing Heads
All conventional Acme equipment includes:
- Smart screen operator consoles
- PLC electrical panels
- Remote troubleshooting via modem connection
- Automatic wheel wear compensation
- Liquid and bar compound systems
- Acme's rigid machinery designs for reliability, maintainability & durability
|
|
|
|
|
|
Precision carbide tool grinding and lapping machine
The BG-2 offers an ideal solution for the requirements of producing a large variety of carbide single point turning tools, as well as their maintenance by resharpening.
- Diamond-double-side rough and finish grinding and lapping wheels eliminate re-clamping of tools.
- Direct and accurate reading of angular setting facilitates extremely precise adjustment of tool holder to cutting angle.
- Micrometer infeed, combined with a sensitive reciprocating motion of the tool procedure perfect cutting faces and edges, while providing for long life of grinding and lapping wheels.
- Small Cutter Griding Attachment Free angular adjustment of the attachment permits round-shank tools including half round drills, flat drills, single and double tooth milling cutters, etc., to be ground round with the crank handle or flat with a reciprocating motion.
List of specifications
Spindle speed:
- 60Hz 3,200min-1
- 50Hz 2,660min-1
Wheel size:
- o.d 175mm
- i.d 36mm
Swivelling angle of tool holder:
- Horizontal plane 90º(Right & Left)
- Vertical plane 25º(Right & Left)
- Front & Back 45º
Shank size of tools 20 × 20mm
Power of motors:
- Main motor 0.4kw
- Coolant pump 0.06kw
Floor space 700 × 700mm
Spindle height 1,025mm
Net weight 300kg
Standard accessories and functions
- Oiler
- Three Handling Tool - Hexagonal Wrench (4,5,6/each)
- Work Light
- Pin - Spanner
- Diamond wheel / 1 set (#200, #1500/each)
|
|
STO for high volumes
The most advanced machine for gridning and polishing with big production, modular system and automated in all its functions.
Due the high capacity and the extremely easy use, this machine is suitable for big polishing center and tubes manufactrures, steel maker and bars polishing.
Available for belt grinding and mirror polishing units, floating type with independet set up and adjustable and controlled pressure, to achieve a perfect grade of surface finishing even on not straight and round product.
Advanced controll panel with full set up of the machine obtained the simple input of the diameter.
Heavy payload trsnposrt systems on and off board and large capacity loading and unloading devices.
Possibility to install in line packing mahchine and bundle forming systems.
|
|
ENESKA 3-1 - The classic all-rounder
The classic from JOKE®. Developed for light to medium jobs in tool
and mould building. During development, this system was really put
to the test and continually perfected in countless practical tests.
That’s why it can take hard use in a professional environment.
|
|
Flexible Shaft Machines supply new-found freedoms: By seperating the motor from the tool with a shaft, it is no longer necessary to bring a bulky tool to your workpiece. Instead, the motor can rest on the floor or hang from a nearby hook. As a result, it is no longer necessary to support the weight of the power tool while grinding. The handpieces are extremely small, and can reach into areas that are simply not accessible by any hand-held straight grinder. By placing the power source away from the application and out of view, users experience freedom from heat, noise and vibration from the power source.
Industrial flexible shaft tools are offered in several styles, from a small 500 watt machine with 120 volt right up to our high end Mammoth machine, which is 3-phase, 480 volt, 1 horsepower.
|
|
| ... products without technical information |
| |
|
|
|
|
Centerless grinding and polishing maschine typ RP S 376
A new technical development for high speed grinding has now been successfully proven at Company Thyssen Krupp Elevator.
Stock removal grinding and finishing in one pass to final tolerance on DOM Tube. Heavy removal rates which eliminate the pre-turning on large cylinders over 6” ( 150 mm ). Stock removal of 1,4 mm with high speeds of 4m/min on tubes over 200 mm diameter possible
LOESER centerless grinding machines made with single- and multistation grinding heads (swivel joint technology) are used in the tube, pipe and bar industry, automotive industry, hydraulic industry and many others. surface improvement up to ra = 0,01 micron can be achieved easily. diameter starting with 1.3 mm up to 500 mm can be finished with through feed speed up to 30 m/min. depending on the workpiece. various workpiece length of 20 mm up to 20 m can be surface improved by grinding, brushing, polishing or deburring. automatic operation of the machines combined with magazines or in automatic production lines reduce the handling costs of parts. easy operation and quick belt change systems reduce the downtime. pneumatic grinding pressure control insure consistant quality.
|
|
High performance grinding and polishing machine for tubes, with high versatily, working with abrasives belt. Used in the tubes, pipe and bars production to improve the cosmetic or surface carchteristics.
Workable dimensions length from 1MT up to 12MT and diameters 10mm up to 150 mm,220 mm and 300 mm. Are also avaiable special version for smaller diameters.
For greater diametercould be interesting check the STO machine.
The machine can be completely automated and controlled by PLC software.
Grinding pressure is constantly monitored to keep an high quality level
This machine is perfect to be installed in line with the mirror polishing machine model PT 150 If you need a really superfinishing solution please discover our STL model for longitudinal polishing.
For small shops and and fabricators the most perfect solutions is our combo unit model STP with possibility of making on the same unit both satin finishing and stock removal and polishing and buffing.
|
|
|
|
|
|
High Speed Cutting and Jig Grinding with very high precision in one machine
Simple programming of the machining cycles for jig grinding
Grinding technology fully integrated (contact measurement of the abrasive pin, dressing spindle, grinding oil, CO2 extinguishing system etc.)
High precision of machine due to combined use of linear motors and absolutely friction-free hydrostatic guides in all axes
Maximum feed rate and acceleration limited to achieve highest possible precision
Outstanding damping characteristics due to hydrostatic system oil film in all axes
Friction-free counterbalance in the Z-axis
Extremely rigid machine construction, 11 t weight
Three-point support, damping machine feet
Precise control of all temperatures in the machine, including the cooling water, the oil for the hydrostatics and the oil for the machining, cooling of motors and secondary magnetic elements, extra cooling housing for spindle
Cabin completely closed, includes noise reduction and large windows with security glass, loading with crane possible
Infrared touch probe for work piece set up and 3D measurement of the contour
Chip disposal via 2 spiral conveyors into chip box behind the machine
|
|
| ... products without technical information |
| |
|
|
|
|
FEATURES
LIFETIME Guarantee:
HFT offer a lifetime guarantee on the MOTOR of the TEG-3
Repeatable points every time:
The use of the 'TEG - 3 Tungsten Electrode Grinder' will give exactly the same tungsten points every time, enabling consistent repeatable arc performance and welding results.
Axial grinding:
By grinding the points longitudinally, the 'TEG - 3 Tungsten Electrode Grinder' eliminates arc flicker or wander.
Sizes:
Sizes from 1.6mm to 4mm can be ground as standard. Any other sizes can be catered for on request.
The TEG-3 Grinder is so powerful that it will grind tungsten electrodes up to 6 mm diameter, without stalling or burning out the motor. Remember, our lifetime guarantee and it has no limits. With the aid of a special collet accessory, short tungsten electrode lengths can be held, thus increasing the life of each electrode.
Low cost:
The TEG-3 Tungsten Electrode Grinder, has been designed and manufactured specifically for grinding Tungsten Welding Electrodes up to 6 mm diameter.
Prolonged tungsten life:
A tungsten electrode tip ground with the TEG-3 machine, will have a much greater life than a tip that has be hand ground on a workshop wheel or belt machine.
Arc Stability
Tungsten Electrode Tips ground with the TEG-3 Grinder, will be smooth and free from ridges, thus preventing erratic arc behaviour, arc flickering and arc instability.
|
|
|
|
see the results for the following category : 
