|
|
Die grinders of the brands Yokota are used for most light dressing / fettling
applications on fabrications and die setting sets.
|
|
Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access in hard-to-reach areas. These durable tools reduce stress and noise, under 67dBa. Suitable for a wide variety of applications at speeds of 25,000rpm to 90,000rpm .
No maintenance or lubrication. Eliminate oil contamination and frequent repairs of vanes, while reducing air consumption. Lower vibration means less fatigue and RSI/MSK related injuries.
|
|
50 Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access in hard-to-reach areas. These durable tools reduce stress and noise, under 67dBa. Suitable for a wide variety of applications at speeds of 25,000rpm to 90,000rpm up to 1.HP. Effective, Comfortable & Reliable
No maintenance or lubrication. Eliminate oil contamination and frequent repairs of vanes, while reducing air consumption. Lower vibration means less fatigue and RSI/MSK related injuries. Click Here for Vibration Statistics. Patented automatic Brake Option.
|
|
G Series grinders are available in a choice of 0.3kW, 0.6kW and 1.0kW motors offering the right performance for every application. Configurations available include straight, extended straight and angle with a variety of attachments.
The G1 series (0.3kW) is ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds and other finishing tasks.
The G2 (0.6kW) series is perfect for big jobs having a high torque motor with high stall.
The G3 (1.0kW) series has a superior power to weight ratio with one of the highest stall torques on the market today. With its contamination free speed controller and one nut access for servicing it is the tool of choice for maximising material removal rates.
The G3A120PP95AV angle wheel grinder (125mm) has one of the lowest vibration levels available today with autobalancer and unique anti-vibration side handle fitted as standard.
|
|
WRH 6-20/3Z
- This small but powerful angle grinder has a flat head and a robust gear mechanism.
- Thanks to the double gear bearing set, it is perfectly suited for the transfer of extreme torque.
- Two versions are available:
- with grinding wheel 6 mm
- with chop spindle M10.
|
|
Central Vacuum Pencil Grinders
- For precision deburring and finishing on aluminium, bronze, etc.
- Ideal for removing parting lines in casting houses, cast parts
- Ergonomic, low sound level and lightweight for greater operator comfort
- Turbine-driven air motor has no wearable gears or vanes
- Oil-free operation minimises maintenance time and repair costs
- Includes high quality flexible air (1.65 m) and vacuum (1.8 m) hoses
- NEW Urethane shrouds - non-marring and customisable - for greater dust extraction
- Available in three speed offerings: 35,000 RPM (red), 50,000 RPM (gold) or 60,000 RPM (teal)
|
|
LIGHTWEIGHT DYNINGER®
- Air-Powered Abrasive finishing tool to use with Spindle-Mount, Arbor-Mount and Eyelet Sanding Stars.
- Excellent for use on wooden parts, moldings, raised panels and intricate profiles.
- Tool includes 94407 Air-Flow Control Dynaswivel® fitting for maximum tool maneuverability and control.
|
|
|
|
|
|
Pneumatic straight grinder
Maintenance/ Automotive
- Our air die grinders are economical, long-life tools with throttle levers designed to prevent accidental starting and to give you excellent speed control. All Ingersoll Rand air grinders are compact, lightweight, easy to handle and include all bearing construction for the utmost durability.
Industrial Production:
- G-Series are designed for material removal using a carbide burr, mounted wheel, mounted cone, or Type 1 wheels. For consistent and quality performance, Straight Grinders are great for removing parting lines, fins and small risers from castings, smoothing and blending welded areas, and cutting through and removing material as required.
- The Pro-Series heavy duty models are designed for production and maintenance applications involving heavy material removal and large workpieces delivering superior power and feature significant operator advantages. When unusual light applications create the need for easy to handle, small grinder solutions, the ARO pencil grinders can be used to scribe glass for cutting or to mark welds and other surface for identification.
|
|
TSD 385
Due to the lamella motor, the lubricant-free drive of this grinder is thoroughly unique and patented. Similar to the turbo drive, this machine is lubricant-free yet still slim and easy to handle. The life cycle can be compared to lubricated lamella motors. A double bearing set allows the grinder to also be used for extreme applications.
|
|
Atlas Copco has manufactured industrial grinders since 1918. Through the years many Atlas Copco innovation has set the standard for industrial grinders.
We hold the world record when it comes to power to weight in grinders.
Our GTG 40 develops 6,1 hp (4,5 kW) thanks to it’s turbine motor, an Atlas Copco innovation.
If you want the ultimate in Power, Ergonomics and Durability you only have one choice – Atlas Copco.
|
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product.
|
|
CP Industrial grinders:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower grinders:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production.
|
|
|
|
|
|
Pneumatic Angle Grinder DW 104, 105,107
Benefits
DW 104
- High output class because of its extremely stable bearing;
- The safe switch-on element (valve lever) adapted to special handling requirements allows the user to operate it even with heavy-duty gloves;
- The centrifugal governor ensures that energy consumption corresponds to contact pressure while output remains steady.
DW 105
- High performance at low air consumption and low tool weight;
- Constant circumferential speed even at high removal rates;
- Long tool life thanks to durable transmission;
- Insulated handle;
- Encapsulated and low-vibration motor;
- Flexible handling thanks to the optional use of a second handle;
DW 107
- High performance at low air consumption and low tool weight;
- Long-lasting tool thanks to durable transmission;
- Encapsulated and low-vibration motor;
- Flexible handling thanks to the optional use of a second handle;
- Variable handling due to optional use of a second handle bar;
- Spindle and chuck build a safety-link;
- Valves with safety-lock;
- Standardised chucks for Grinding-, Cutting-, Fibre-Disks and Brushes;
Areas of Application
For smoothening welds, grinding, roughing, and deburring edges and cast materials, steel, VA, aluminum or wood; for removing rust / abrading / polishing a variety of surfaces.
Technical Data:
DW 104
Speed: 13,000 min -1
Wattage: 530 Watt
Air consumption : 11.5 l/sec
Wheel diameter: 100 mm
Chuck: 16 mmn
DW 105
Speed: 12,000 min -1
Wattage: 700 Watt
Air consumption: 14.5 l/sec
Wheel diameter: 115/125 mm
Chuck: 22 mm
DW 107
Wattage: 1,100 Watt
Speed: 7,100 min -1
Air consumption: 11.5 - 19.2 l/sec
Wheel diameter: 180 mm
Chuck: 22 mm
|
|
surfacing, dipping , polishing... for body work and sheet metal applications.
hand-hold.
delivered with a black Bakelite plate of 180 mm
supplied in metal box
disc or millstone diameter to fit(mm): 180
no-load speed (rev): 4500
air consumption (l/minute): 400
advised using pressure (bar): 6.2
inlet: 1/4"
|
|
Model GR60 Cup Stone Grinder
Features:
- 6 inch diameter wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model HG60 Bull Nose Grinder
Features:
- 2.5 inch cone wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model HG80 Grinder
Features:
- 8 inch wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model FG10 Frog Grinder
Features:
- Grind Frogs, rail ends or mis-matched rail
- 6 inch wheel
- 5/8 inch - 11 arbor
- 3-position pivot allows for 3 separate grinding operations
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
Model PG10 Profile Grinder
Features:
- Grind rail from 90# to 140#
- 6 inch wheel
- 5/8 inch - 11 arbor
- Adjustable flange wheels
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
|
|
For a peripheral speed of 80 m/s (16000 ft/min)
Our robust high-performance angle grinders, equipped with scrubber-wheels, can be used for the scrubbing, grinding and grading of cast-iron, steel, ridge-seams, non-ferrous metals of all type, as well as stones, i.e. in the steel- and container-construction, manufacturing, foundries, the plastix- and stone-processing, and in the reinforced concrete-construction, etc.
The smallest grinder model DBU 115... is an efficient handheld grinder, requiring only a single hand for an easy operation.
The build-in speed-regulator keeps the speed under load virtually constant, and furthermore reduces the air-consumption at idle speed.
The ON switch is integrated into the larger grinders and executed as lever-valves, already correspond to the future demands of the EN 792, because of the additionally integrated start-protection.
Futhermore an automatic out-of-balance compensation is integrated into the grinders which reduces their vibration to a minimum.
|
|
Angle grinder 6 mm collet
V.252
Technical caracteristics
- Angle grinder for grinding wheels with shank.
- For cutting and cleaning.
- Compact motor with sturdy blades.
- Compact angled head for difficult-to-reach places.
- Exhaust air duct with integral air supply pipe.
- Supplied with 6 mm collet and 2 open-end wrenches.
- Air connection (female thread) : 1/4".
- Recommended air hose ( int.) : 8 mm.
- Recommended fitting (thread - int.) : 1/4"-6.
- Pressure : 6.3 bar.
- Speed of rotation : 18,000 rpm.
- Average air consumption : 300 l/min.
- Noise level (dB(A)) : 83.
- Vibration level : < 2.5 m/s.
- Collet : 6 mm.
|
|
12,000 – 40,000 RPM
0.2 – 0.9 hp (0.15 – 0.67 kW)
■ Great for die and mold work,
deburring
■ Aluminum, composite or rugged
steel housings
■ Complete selection of rpm
speeds available
■ Front, side, and rear exhaust
models available
|
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product.
|
|
Pneumatic Straight Grinder GG5/700, GG30/150, GG30/220, GG40/150
Benefits:
- Adapts to several applications due to different power classes and speed ranges;
- Different grinding and milling heads permit a wide range of uses;
- Ergonomic tool shape and low tool weight ensure easy handling;
- Standard collet chuck for high true running accurancy;
- The G30/150's centrifugal governor guarantees constant speeds.
Areas of Application
For milling, grinding and deburring in modul making, machine building, container building, in foundries and in the plastics industry.
Technical Data
Power: 50/300/400 Watt
Speed: 15.000/22.000/70.000 min -1
Collet chuck: 1 - 6 mm
Constrution:
GG .../...K short type
GG.../ ...L long type
|
|
Type Surface grinder
Grinding wheel dimensions Lap.200*40*20 / Meule 200*25*20
Type of wheel 36 / 60
Power (W) -
1 ph motor 230 V
3 ph motor 400V 1100
Speed (rd/min) 3000
Dimensions 680*430*360
Weight (kg) 27
|
|
Highly versatile compact angle grinder with M 14 spindle for grinding and sanding.
For all grinding, sanding, cutting and brushing applications.
HIGH-POWER-MOTOR with enormous torque for high grinding capacity.
Self-start lock prevents uncontrolled reactivation following power supply interruption.
Gentle start for recoil-free and safe starting.
Spindle brake for quick tool changes.
|
|
- 18,000 RPM Extension Vacuum cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) center hole
- 1 hp motor delivers cutting speed power
- Vacuum shroud effectively captures source dust
|
|
- 20,000 RPM cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) mandrel
- An attached, non-marring plastic flange protects surfaces during cutting
- .7 hp motor delivers cutting speed power
- Tool is equipped with 94300 Dynaswivel®
- A 3" (76 mm ) diamond wheel with integrated mandrel is required (sold separately)
- Unique shroud and flange design add to existing cut-off family
- Ideal for trimming fibreglass/composite parts
|
|
G Series grinders are available in a choice of 0.3kW, 0.6kW and 1.0kW motors offering the right performance for every application. Configurations available include straight, extended straight and angle with a variety of attachments.
The G1 series (0.3kW) is ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds and other finishing tasks.
The G2 (0.6kW) series is perfect for big jobs having a high torque motor with high stall.
The G3 (1.0kW) series has a superior power to weight ratio with one of the highest stall torques on the market today. With its contamination free speed controller and one nut access for servicing it is the tool of choice for maximising material removal rates.
The G3A120PP95AV angle wheel grinder (125mm) has one of the lowest vibration levels available today with autobalancer and unique anti-vibration side handle fitted as standard.
|
|
|
The quality of a welded tube construction depend largely upon the right preparation. With the ZOPF pipe grinder this is realizable on an easy way. Just place a pipe in the rotable clamp, which is mounted on a compound rest / carriage, and grind a diameter and / or any shape of pipe accurately and efficiently to the desired angle.
|
|
1400 WSE 125
Product features
- Full wave electronics for consistent power and speed
- Soft start-up and start current limitation
- Aluminium die-cast gear casing
- Spindle lock for quick grinding disk change
- Electronic overload protection prevents the motor from overheating
- Carbon cut-off brushes for motor protection
- Restart protection to prevent tool starting automatically following a power failure
- Up to 300º protective cover adjustment
- Gear with special spiral toothing and low-vibration gearbox mount for quiet running
- Easy-to-change carbon brushes
- Protective cover can be pivoted without a tool
- Ergonomic, two-component soft handle for fatigue-free, low-vibration work
- 4 m rubber mains cable with patented quick-lock system
- 4 m and 6 m cables can be delivered as accessories
|
|
VIBRATION BELOW 5 m/s²
People who use angle grinders every day are only too familiar with equipment vibration and in many aspects aware of its effect on health. EU directive 2002/44/EC, June 25, 2002, specifi cally addresses workers exposure to hand-arm vibration. It sets exposure limits to help protect workers and aids employers to take measures to help reduce workers exposure. In addition to the Metabo VibraTech system Metabo now uses autobalancing technology to help reduce the level of vibration users can be exposed to. From compact models up to 150 mm, we now have the widest range of lowvibration angle grinders on the market
|
|
|
|
|
|
Features
Die Cast Construction – for increased durability
Spindle Lock – allows for quick and easy accessory changes
3 Position Side Handle – for added convenience
Compact Gear Case – for less weight and increased versatility
Powerful 13 Amp Motor – features precision cut gears and sealed bearings for increased durability
Multi-Position Twist Handle – can be locked in one of three positions
Overmold Primary Grip – reduces vibration and provides a more sure grip
Two Finger Trigger Switch – for comfort, ease of operation, and reduced user fatigue
Auto-Stop Brushes – automatically shut down once the end of their usable life is reached protecting the tool from damage
Tool-Free Wheel Guard Adjustment – makes changing guard positions fast
Lighted Plug – to easily identify live tools
Specifications
Input: 120 V AC, 13 Amps
No Load Speed: 8,000 r/min. (RPM)
Spindle Thread Size: 5/8 in-11U
Tool Weight: 8.0 lbs.
Cord Length: 12 ft.
Includes
R1020 Angle grinder, side handle, wheel guard, grinding wheel, flange, clamp nut, spanner wrench, and operator’s manual
|
|
180mm(7") Disc Grinder (2,400W/2,600W)
- Vibration-absorbing main Handle and side Handle:
- Low gear sound
- Powerful 2,400W/2,600W Hitachi Motor
- Excellent overload durability:
- Stator coil cooling technology for class-top overload durability
- Prolonged service life of the Carbon Brush
- Dust- proof ball bearing thanks to the labyrinth construction
- Soft grip handle
- Construction to protect grease leakage
- wheel guard angle-adjustable without using a tool
- Spindle Lock and 3-position side handle design
- Soft Start Control for G 18UAY
|
|
|
|
