|
|
Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access in hard-to-reach areas. These durable tools reduce stress and noise, under 67dBa. Suitable for a wide variety of applications at speeds of 25,000rpm to 90,000rpm .
No maintenance or lubrication. Eliminate oil contamination and frequent repairs of vanes, while reducing air consumption. Lower vibration means less fatigue and RSI/MSK related injuries. Click Here for Vibration Stats |
|
ULTRA-PRECISION HIGH TORQUE AIR GRINDER :
- High torque air motor assembled with special vane mechanism.
- Two types of air motors can be selected depending on the application.
- 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. |
|
Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access in hard-to-reach areas. These durable tools reduce stress and noise, under 67dBa. Suitable for a wide variety of applications at speeds of 25,000rpm to 90,000rpm .
No maintenance or lubrication. Eliminate oil contamination and frequent repairs of vanes, while reducing air consumption. Lower vibration means less fatigue and RSI/MSK related injuries. |
|
Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access in hard-to-reach areas. These durable tools reduce stress and noise, under 67dBa. Suitable for a wide variety of applications at speeds of 25,000rpm to 90,000rpm .
No maintenance or lubrication. Eliminate oil contamination and frequent repairs of vanes, while reducing air consumption. Lower vibration means less fatigue and RSI/MSK related injuries. |
|
Industrial/Marine Gas Turbine generator set
Specifications:
-2MW power range
-High Efficiency
-Dual fuel capability (Gas/Diesel)
-Low LHV Gas
-Low Emissions
-High outlet temperature
Benefits:
-Compact
-Long product life
-Low maintenance costs
-Ideal for Oil&Gas and CHP applications |
|
Utilizing the proven PWPS FT8® technology, the SWIFTPAC power plant offers 60 MW of power and is designed for quick & easy installation.
The package design includes a shippable engine enclosure which incorporates the gas generator, power turbine, exhaust collector box, inlet plenum and lube system. This factory assembled module allows the SWIFTPAC power plant to be generating power in less than three weeks after arriving on site. |
|
| PWPS Marine offers a full line of gas-turbine engines for a variety of maritime applications. Covering a range from 400 to 40,000 horsepower, our engines power ships from as large as destroyers and cruisers to as small as hydrofoils and private yachts. All products are derived from engine designs and technologies successfully service-proven in Pratt & Whitney's aircraft engines. |
|
VPS Series Gensets for Cogeneration & Power Generation
Greater power, higher efficiency and availability are key issues for power generation markets. With more than 15 million hours of proven performance, the cornerstones of our VPS Series packages are the compact, rugged, and reliable ASE Series aero-derivative gas turbines. Our aero-derivative based solutions have high power density making them ideal for putting maximum power in a relatively small package. They also can be continuously started and stopped, enabling users to easily meet varying power requirements without compromising performance. In addition, they can operate on natural gas, distillate and oil, as well as various waste gases and bio-fuels.
Our VPS Series packages offer the smallest footprint and lowest installed weight in their power class and can easily be integrated into your existing power plant. Our packages are factory-tested prior to shipment-we deliver a generator set that is ready for rapid installation, easy commissioning and reliable operation. Our highly integrated packages house the gas turbine, generator and auxiliary systems reducing field labor and overall project costs.
Finally, our turnkey solution provides customers with a single source for engineering, construction, installation, start-up and full maintenance programs. OnSitePower Solutions remove all the worry because you'll acquire a custom-tailored cogeneration facility ready to produce power and thermal energy. |
|
| Vericor offers marine power solutions up to 6 MW. Our solutions are based upon our TF Series gas turbines and can be configured in single and twin applications. They are military specification compliant and can be employed for continuous or emergency power uses. And most importantly, they are smaller and lighter than diesel engine based solutions with the same advantages as our marine gas turbine propulsion solutions. |
|
| ... products without technical information |
| |
| Our new and unique acetal bodied turbine vibrator is ideal for clean rooms. The label is etched; no chance for contamination. All exposed parts are 304 stainless steel. It requires no lubrication. The units have more force at lower air consumption and pressure than competitors’ models. They have state-of-the-art CNC machining and improved technology. Turbine are very quiet, below OSHA standards. They have a longer life than ball vibrators. The acetal body is FDA and USDA compliant for food applications. |
|
| Cleveland Vibrator’s turbine vibrators have the same, single-bolt body style as ball vibrators. Some models have more than 4x the force output as competitors’ while using less air. Units are rugged, ductile iron, requiring no lubrication. They are ideal for the most demanding applications. |
|
VT range silencious (- 60 dba)
Anodised aluminium body
Steel flanged
Turbine with special profil
Reduce air consumption
Variation of frequency and amplitude according to air delivery or air pressure. |
|
OT-type External Pneumatic Turbine Vibrators combine high frequencies with high centrifugal forces at large amplitudes. OT Vibrators are operated oil-free with filtered compressed air. They do not require any maintenance and they are successfully used as flow aids on bins, as drives for chutes or screens, and on vibrating tables.
Vibration with the OT-type is generated by a turbine with integrated flyweights which rotates on two oversized ball bearings. OT Turbine Vibrators have a high work moment and develop high vibration frequencies and centrifugal forces. Vibration presents a large amplitude even with low operating pressure.
For operation a 2/2-way-valve and filtered compressed air are required.
- Explosion-proof
- Operating temperature: from -4° F to 250° F
- Oil-free operation possible
- Maintenance-free
- Great acceleration
- High centrifugal force
- Low noise level
- Low air consumption
- Standard ATEX ExII3D certified |
|
Pneumatic turbine vibrator - Model WP:
- Without maintenance.
- Limiting device of noise.
- High Output.
- Minimal Consumption of air.
- Use without lubrication.
- Startup in an aggressive environment.
- Seals with water and dust.
- Use until 120°C. |
|
| ... products without technical information |
| |
The FT8 POWERPAC industrial gas turbine package is a power generation unit that utilizes the SWIFTPAC modular design concept of very efficient electrical power. The FT8 is a derivative of the JT8D, one of the most successful flight engines in aviation history.
The gas turbine, mounted on a steel base, is packaged with its ancillary support systems and directly drives the generator package. |
|
The FT8 POWERPAC industrial gas turbine package is a power generation unit that utilizes the SWIFTPAC modular design concept of very efficient electrical power. The FT8 is a derivative of the JT8D, one of the most successful flight engines in aviation history.
The gas turbine, mounted on a steel base, is packaged with its ancillary support systems and directly drives the generator package. |
|
Ansaldo Energia handles all aspects of plant engineering, helping customers define the features of new plants, complete power stations or individual components and identify the best technical and economic solutions.
Each commission is designed and implemented as a unique project to satisfy all customer needs by developing plant engineering on a turnkey basis, including mechanical, civil, installation and start-up process engineering.
This level of customisation is made possible, with guarantees of maximum reliability, by the development and fine tuning of high quality, flexible solutions. |
|
| ... products without technical information |
| |
...disturbance insensitive and long-lived!
The turbine flow sensors of the product line Turbotron are sensors for flow rate measurement or dosing applications for liquids. Through its especially compact type, its very wide measuring range and its convincing precision of measurement, it has an almost unlimited application.
Function
The liquid flowing into the Turbotron is divided by the guiding blades in four split beams. These hit the rotor from four directions and put it in motion. The uniform loading of bearing from four sides causes the forces to cancel themselves out for the most part and wear is reduced to a minimum.
The extremely hard bearing materials, sapphire and hard metal, ensure in addition an extraordinary life expectancy.
The rotor rotation rate is now converted into an electrical pulse signal (frequency):
VTH and VTP are equipped with rotors which are fitted with magnets. A Hall effect sensor recognizes the rotation of the rotor.
VTI has stainless steel pins in the rotor. An inductive proximity switch detects the rotor rotation.
In both cases, a flow-proportional frequency signal (square wave signal) is available. |
|
Hoffer flow control
Controls turbine flowmeters
Of all the various types of flow transducers available to industry today. None are so universally applicable as turbine flowmeters. They continue to be the most common way to measure flow electronically and have the ability to measure available upon request offering detailed, technical information. |
|
FLOW RANGE (Note 1)
Ranges shown are standard ranges — other ranges are available. Contact Hoffer Flow Controls Applications Group.
BEARING TYPES (Note 2)
—CB Hybrid Ceramic, Self-lubricating shielded ball bearings. Ball bearings must be used on CO2, may be used on H2O and never on H2O/Sand or CS.
—C Hard Carbon Composite sleeve bearings. For use on H2O only.
—T Tungsten Carbide sleeve bearings. Tungsten Carbide must be used on H2O/Sand and CS, may be used on H2O, and never used on CO2. |
|
This machining centre is specially dedicated for the machining of turbine blades. 4 machines sizes are available for 4 maximum blade lengths:
408TB = 60 mm
508TB = 260 mm
518TB = 470 mm
528TB = 650 mm
The quality and accuracy are increased thanks to the tool tip located in the centre line of the B-axis. The B-axis extreme tilting positions are additional advantages and allow to produce a wide type of parts for the aviation industry. |
|
TURBOMILL XL 1400 / 2000 / 2600:
5-axis VMC: Ultra-Dynamic HSC Machining Center for producing Turbine Blades.
- g-accelerated 5-axis machining
- Max. part length 1400-2600 mm (47"/71")
- Max. part dia. 650 mm (26")
- Second synchronously workpiece drive
- 20° slanted C-Frame
- Tailstock CNC controlled
- Spindle 12000, 15000 or 18000 rpm
- Toolmagazine -32 tools
TURBOMILL 7500:
5-axis VMC: Ultra-Dynamic HSC Machining Center for producing long cylindrical parts such as feed- or extruder screws.
- g-accelerated 5-axis machining
- Max. part length 7500 mm (295")
- Max. part dia. 660 mm (26")
- 20° slanted C-Frame
- Tailstock CNC controlled
- Second synchronously workpiece drive
- Steady rest automatic positioning with cutting tool
- Spindle 12000, 15000 or 18000 rpm
- Spindle power 28-44 KW, 57-280 Nm (42-206 ft lb)
- Toolmagazine 20-32 tools |
|
| ... products without technical information |
| |
|
|
see the results for the following category
