|
|
electro-hydraulic and/or electro-pneumatic band saws designed to cut solids and sections up to 330 mm from 45° right to 60° left
|
|
Pinheiro Multiple Rip Saws and Double Edger, AMA series assures, with the great robustness and stability, as well as its unique double V guided feed chain combined with grooved top pressure rolls and its extra long arbor supported by 4 over dimensioned bearings, a perfect straight line cut.
With a motor power capacity up to 75 Kw / 50 Hz (100 HP) or 90 Kw / 60 Hz (120 HP) and a feed speed up to 40m/min - 130 ft/min, assure high levels of both quality and productivity.
An extensive option list makes this particular model a real customised machine.
|
|
XBE HEADRIGS
THE XBE IS A YARDSTICK IN TERMS OF FRAME
SINGLE-CUT or DOUBLE-CUT VERSION
* Diameter of flywheels 1400, 1600, 1800 or 2100mm.
* Hydraulic blade tensioning.
* Electric double blade guide arm.
* Top and bottom pressure blade guide
* Hydraulic braking of the bottom flywheel.
* Hydraulically-controlled blade guard.
* Protective cover.
* Rollers or chain belt integrated in the table (option).
|
|
STANDARD BAND SAW
FIXED STEEL TABLE NOT MACHINED - SOLID STEEL WHEEL
Braking of the blade in less then 10 seconds
More than 20 version available:
fixed or movable
energie 220 V ou 380 V
termical
PTO
mixed : electricitie + mounted
road trailer
|
|
Cut easily every fabrics, PVC, coated matérials, foamed products....
* 2 speed motor équipped with brake for a quick safety stop of the rotating blade
* Safety telescopic protection around the blade
* 2 models 740mm from blade to frame
* 1240mm from blade to frame
|
|
|
|
|
|
manual, semi-automatic to automatic
Pivot-type Machines
Especially suited for use in job shops. Important characteristics are: small foot print, easy and accurate miter adjustment, excellent cutting performance.
Double Column Machines
For higher demands and materials with tensile strengths up to 1400 N/mm2. The double-column design allows a better application of the needed feed force. Today’s state of technology are bevel spur gear drives as drive source in connection with a frequency-controlled saw motor, maintenance-free linear guides
Production Sawing Machines
Modern control technology with stored cutting data of all current materials. After entry of material-grade and number of pieces, cutting speed and feed rate are adjusted automatically. Machines with carbide blades cut high tensile alloys with tensile strengths up to 1900 N/mm2 economically . Due to a higher blade life and reduced cutting times, an amortization of the higher machine costs is achieved.
Large Bandsawing Machines / Block Bandsawing Machines
To cut plates from large size blocks and plates. Small to very large working ranges and table loads up to 40 tons.
Automatic machines and machines designed for notching available as well.
|
|
The working quality does not mean the processing quality only, but it considers also other aspects such as productivity growth, exercise cost reduction and working place hygiene.
The TYROLIT diamond saws for conventional and fast lowering frames offer a precise and long lasting answer to the cutting requirements of all materials, even the hardest and most difficult to be sawn, such as hard colored marble and superabrasive or extra hard sandstone.
|
|
STAR CARRIAGE
NEW MODEL WITH EXTENDING CLAMPS
RESINOUS or HARDWOOD
* Pneumatic or Hydraulic.
* Opening 800 or 1000.
* Clamps opening 800 or 1000mm.
* Movement on round column Ø120.
* Triplex chain drive.
* 4-position extending clamps.
* Double clamping pressure.
* Centralised lubrication.
* Slab FLIPPERS.
* SINGLE OR DOUBLE LOG TURNERS.
* Serrated chain with a 38.1mm pitch.
* Electric motor.
* DRIVE CARRIAGE 37 to 60 HP.
* Drum Ø340 or 565mm.
* Cable Ø16 or 22mm.
* Safety brake.
* Ergonomic control panel.
* Air-conditioned cab.
|
|
Features
3/4 HP TEFC induction motor – quiet, smooth running belt drive delivers power to resaw up to 6 in. thick oak
Heavy duty construction – cast iron table and frame minimize vibration, precision balanced cast aluminum upper and lower wheels, steel wheel covers and heavy gauge leg set
Unique features – micro adjust on upper and lower blade guides for precise tracking, wheel cleaning brushes prevent dust build-up on wheels, built-in dust collection port, on-board additional blade storage
User-friendly controls – high visibility indicators and comfortable Sof-Touch™ on knobs help make adjustments easier. Large paddle switch with safety lock-out
Specifications
Input: 3/4 HP TEFC induction, 10/5 Amps., 120 / 240 V
No Load Speed: 2,700 FPM
Blade Widths: 1/8 in. – 3/4 in.
Blade Length: 93-1/2 in.
Table: 14 in. x 14 in. cast iron
Table Tilt: -10° – 45° right
Frame: cast iron
Throat Width: 13-5/8 in.
Depth-of-Cut: 6 in.
Tool Weight: 178 lb.
Includes
3/8 in. blade and leg set
|
|
SHARK332 SXI evo
One model only to take place of the two leading models of its class: SHARK332 SXI and SX. Taking after the first one the high performances and from the second...the price !!!
Technical features::
Hydraulic unit equipped with high efficiency electro-valves and high pressure (200 bar) hydraulic pump;
Main electronic control of the machine made by new generation of microns and located completely inside the main control box;
Control box positioned on the front side of the steel base with a 180° swivelling which allows the operator to position it wherever needed;
Visualization by digital display of alarms, diagnostic, machine operations (cutting time, piece counter, blade motor amperage, head position, blade speed, blade tensioning);
Predisposed to be connected to SMV3000/3000 PRO;
Manual and semiautomatic-dynamic mode: STANDARD.
|
|
Log Bandsaws
* Hydraulic or pneumatic.
* Opening 1260 to 1660.
* Clamps opening: 1000 to 1400mm.
* Shock absorber.
* With or without "V" log turners.
* Special large timber slides.
|
|
|
With saw wheels from 1200mm to 1600mm diameter.
|
|
ONL
Horizontal sawing machine to two mounting to cycle automatic rifle for cut of bars or to destined package to intense activities where an elevated productivity is demanded; it supplies performances to the vanguard bound together to an extreme precision of cut also in employs more onerous. They are these requirement of a machine that is placed to concerns us of own segment.
This sawing machine to horizontal tape encloses the typical values of the tradition Fries: duration, reliability, high performances joined to a low cost for cut.
|
|
Horizontal sawing machine to cycle automatic rifle for cut of bars or makes destined onerous intense activities where an elevated productivity is demanded. The sturdier sawing machine to horizontal tape is considered and reliable today in its segment, it guarantees functionality and high productivity.
Besides the installation facility it joins a remarkable precision in the cut thanks to the descent velocity of the variable arc based on the section of the material and to the shear stress.
|
|
Vertical bandsaw with moving head and fixed table with inside automatic feeder.
This machine is designed for cutting carbon and stainless steel plates. The inside work gauge guarantees free access to the table making it possible to load material by crane or by fork lift.
This machine is compact and sturdy. It is very reliable, versatile and easy to use.
|
|
Two columns horizontal bandsaw with movable carriage to cut bars and blocks of large sizes.
Suitable use in forges, steel stock holders and where a requirement of heavy duty bandsaw work is needed.
Equipped with two group of vices, one is fixed to clamp the piece in the cutting area and the other positioned at the end of the movable carriage.
The machine configuration ensures great versatility of use and loading possibility with any lifting means.
|
|
Belt-Knife Blade Machine KMA 3055.01
Closed, modern designed machine casing in solid steel construction, pillar execution on the lefthand side, preventing doors, limit
switch protected. Slewable grey cast iron
table, flanged disk wheels vulcanized and
ground rubber coated, dynamicly balanced.
Precision roller guides on top and
bottom, upper guide height adjustable by a
handwheel, vibration absorbed spring suspension with knife blade charge indicator. Compact V-belt drive via three-phase current motor with safety brake, brake gear, motor protection with under-voltage release. Flow promising suction nozzle.
|
|
|
Sawing machine to fixed table and gantry furnishing devised for the cut of heavy pieces much and great dimensions. It allows the vertical, horizontal and oblique cut in order to operate correctly in the cut of lingotti and forged pieces as also large blocks for steel traders.
|
|
Born from technical and engineering ability developed over the past decades.
This machine is a big automatic vertical bandsaw specially designed to cut carbon-steel and stainless steel plates. Thanks to the sophisticated and sturdy blade guide, longitudinal and cross cuts are possible without any repositioning of the material. The vertical clamps on the machine also permit cutting of stacked material.
|
|
The point of force of this vertical sawing machine to flowing arc is the deep one sbraccio of the arc portalama, this allows to the cross-sectional cut of wide plates using a blade of inferior dimensions regarding the horizontal sawing machines since always comes employed in the cut of the smaller side.
The plan is constituted from sturdy rollers that support the material and of it they facilitate the feeding for the positioning to measure. The machine, available in the semi-automatic or equipped version of automatic feeder, is an indispensable sawing machine for the steel traders.
|
|
|
Vertical bandsaw machine with moving head and fixed table. Suitable for cutting large and heavy blocks. The easy loading and large capacity of the table allows the cutting of large pieces on one or more sides. Largely used in steel stock holders, die manufacturers and mould makers.
|
|
The great advantage of this vertical bandsaw with cross-cut head is its wide throat that allows cross cutting of large plates by means of a smaller blade than the one used by traditional horizontal bandsaws. The blade is cutting across the height of material and not the width. The working table comprises sturdy rollers supporting the material and facilitating material positioning to where the cut is required. Indispensable equipment for steel service centers.
The AST is available in Semiautomatic and fully Automatic with shuttle.
|
|
Automatic high performance bandsaw machines with 3000 mm sinfle stroke incremental feed unit
Automatic mitre bandsaw machines with 3000 mm single stroke incremental feed unit
|
|
|
Stainless steel and tool steel. Tempered steel, special alloys and aluminum. In different thicknesses, shapes and diameters. Singly, in bundles of fixed lengths. Whatever you aim to saw, our HBP, HBV and HBM high-performance and automatic bandsaw series offer the solution you are looking for. In every cutting range. Despite their outstanding performance, our machines are all designed to offer maximum operating simplicity and space savings. And like everything from BEHRINGER, they are unbeatable in terms of speed, precision and quality.
|
|
The all-rounders: Top class for high-volume production
Developed for automatic left and right mitre cuts
Angular precision guaranteed
Highly efficient through NC angular adjustment
High degree of positioning accuracy with NC length measurement device
High feed length even with single stroke
Reliable bundle cuts with package clamping unit
|
|
Main Features:
1. Standardized parts can ensure a best efficient & easy maintenance.
2. All steel plates of machine body are cut by laser to achieve a very precise & rigid construction.
3. Feed chain is made with durable cast iron, which can bear a high breaking resistance over 24000KGS.
4. The feed guide is made from alloy steel which is hardened over HRC 60° can offer a maximum durability and wear-resistance.
5. Comprehensive safety guards for the machine.
6. The specially designed lubricator has the lubricating be synchronizing with the speed of chain feed to ensure a superior LUBRICATING EFFECT.
7. C3 Class saw spindle bearing.
8. AN Eccentric designed of spindle elevation not only can ensure a very quiet & vibration-free running but also can effectively isolate wood chips to prevent any sparkle or burning due to high temperature from a long time running of motor.
9. An Easy & quick exchange of saw blade sleeve.
|
|
Log and panel-cutting band saws
Heavy-duty, torsionally rigid design for the reliable and precise division of panels and logs. Short resetting times. Fast, simple saw band changeover.
The secret lies in the traversable saw frame, which takes up only half the space of a traversable table! And permits cutting lengths of up to 8m! Cutting range: 1600 x 1600 x 8000 mm.
|
|
When the going gets tough
Large bandsaws from Behringer
Unadulterated power – our high-powered solutions for large, heavy workpieces. Reliable, precise and extremely hardwearing.
The optimum solution when the going gets tough
Highly stable design
Extreme load-bearing capacity up to 100 tons
Outstanding durability
Unsusceptible to faults
Wide application range
Heavy-duty large forged components
Ships’ crankshafts
Turbine shafts
Large-scale tools
Metal blocks, etc.
Wide range of machine variants
Machines with roller conveyors: Workpieces are transported on heavy-duty roller conveyors
Table variants: Table is pushed with the workpiece through the fixed saw frame
Gantry design: Saw frame travels over the fixed workpiece
|
|
|
|
