|
|
TK 133 CNC
Semi-automatic single-head cutting machine
Construction Features
Blade dia 500 mm to get very good cutting capabilities
Full protection with complete cover and front automatic lowering closure
Strong cast iron head
Head powered double tilting from -45°/90°/22°30’ by means of a direct current motor managed by a positioner
Oleo-pneumatic blade advancement
Blade motor revolutions 2800 rpm
TK 137 - TK 138
Single-head cutting machine with upwards blade
Blade dia 600 mm to get very good cutting capabilities
Oleo-pneumatic blade upstroke
Spray lubrication
Full protection with complete cover
Chips collection drawer
Optional
RH side tables 801/E, 801/D, 802/M, 802/F
LH loading tables 802/SX, 85400 (only for TK 138)
Pusher (only for TK 138)
TK 137 For all cuts between 20°/90°/-20°
TK 138 It cuts at 90°. If associated to a pusher it can execute in-sequence cuts
|
|
Features of Hydraulic Matellic Disc Saw Machine:
-This series of machine adopts hydraulic drive. It’s especially suitable for thick material.
-Blade moves on perpendicularly slide way which have more stable cutting.
-Adopt two sides and two direction clamp which make workpiece stable.
-The precision is higher than band saw and bow saw with low noise and low pollution. The section is free of burrs and powder without secondary processing.
-The machine head can be adjust to the left and right for beveled cutting and grooving cut.
-Strong water circulation cooling system insures the life-span of saw blade.
-Use pole changing motor with two speeds which can meet the requirement of different metallic material cutting.
|
|
|
|
|
|
FA-110NC
Fullly Hydraulic Circular Sawing Machines
PRODUCTIVE, FLEXIBLE AND HIGH ACCURACY
Tube Cutting Machine Features:
NC Line
+ Touch Screen System for Tube Cutting Settings
+ Multiple Cutting Lengths per Tube
+ Servo Controlled Feeding
+ Vertical sliding saw head ensures stable and precise pipe cutting
+ Backlash eliminating device prolongs the life of saw blade
+ Counter Balance System for maximum stability through the entire cut
+ Patented Floating Feeding Carriage for superior tube cutting length accuracy and smooth material handling
+ Rigid and reliable clamping vise provides secure material holding
+ Automatic lubrication system maintains good work performance
+ Circulating cooling system results in smooth cutting surfaces and longer blade life
+ Electronic Saw blade protection cover for safety operation
+ Built-in chips tray for convenient cleaning and maintenance
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
|
|
TK 145/10 PLUS Exceptional double mitre saw.
New version of the TK 145/10 model completed with 600mm diameter circular blades that increase its cutting capacity. It offers exclusive performances thanks to its ability of working on multiple angles, thus obtaining a high precision level while ensuring robustness and reliability.
Special fabricated and welded steel bed frame with finish machined,
complete with slideways for the mobile head.
Automatic descent of fully safety protections.
Head tilting from 22° 30’ to 90°.
Accuracy: ± 0,1 mm.
Blade motor power: 2 x 3 kW
Blade motor revolutions: 2800 rpm
Blade diameter: 600 mm
|
|
Board divide center Logicut. New screen operating with touch screen.
Type 2000
cutting length on request
|
|
New: Veneer and Panal saw 3 in 1
"Cutting all-rounder"
The motto at this facility. Panel saw and veneer saw in one. Perfect tailored for the small - and medium company.
Standard incl. scoring saw, main saw with automatic saw blade adjustment and jointing unit
|
|
|
|
|
|
SUPER TECHNICS 350 SA
Automatic circular saw, robust, fast and precise cutting of metal profiles and solid materials: for professional use in maintenance workshops and low duty production.
Optional sawdisc Ø 350mm.
One way miter from (0° to 45°).
Three cutting speeds.
Mobile countervice.
Sawdisc breakage protection with safety clutch.
Adjustable cutting head downfeed speed.
SEMI-AUTOMATIC CUTTING CYCLE:
Manual vice adjustment through handwheel - semi-automatic start through pedal switch or control panel switch - the machine carries out a complete cutting cycle including vice locking, cutting head downfeed, cut, cutting head return and vice opening.
AUTOMATIC CUTTING CYCLE:
Bench vice and feeding vice manual adjustment - mechanical adjustment of the cutting length - semi-automatic start through pedal switch or control panel switch - the machine carries out a complete cutting cycle including vice locking, cutting head downfeed, cut, cutting head return and vice opening. Automatic material multi-feeding till the number of cuts programmed on the piece-counter.
|
|
|
|
|
|
COBRA 350 CNCFE, automatic/semi-automatic electropneumatic CNC sawing machine to cut aluminium and light alloys solids and/or sections using blade with electrowelded hard-metal plates.
The machine cuts from 45° right up to 45° left and the head tilts from 0° up to 45° left so as to make inclined cuts.
Machine with controlled double axis multimicroprocessor so as to obtain, on the same bar, 32 different lots, each of different lengths and quantities.
A FEW FEATURES:
Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena
DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- band speed
- number of cuts programmed and carried out
- band thickness - length fed in each stroke
- cutting time - ampermeter
- band tensioning
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
Regulation head stroke according to dimensions of material which has to be cut, is programmed from control panel.
Adaptive shearing stress control system.
Pneumatic vertical vice.
Barfeed is obtained by means of screw/nut with recirculating ballscrews with D.C. motor.
Feeder carriage is mounted, by means of sleeves with recirculating ballscrews, on guided and hardened steel guides.
Flashing indicator light in case machine is stopped.
Predisposed to mount loading table.
Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
Service keys and instructions manual, for maintenance and spare parts list.
|
|
SKL 450 NA - Semi automatic heavy metal circular sawing machine
Semi automatic heavy metal circular sawing machine for high perfomance sawing of profiles from aluminium and aluminium alloys at straight and mitre cuts.
Pneumatic workpiece clamping device. Vertical clamp adjustable in two planes, with short-stroke clamping cylinder and wooden clamping block
Hydro-pneumatic saw blade feed infinitely variable
Polished turn table for mitre cuts. Mitre cutting range 180°
With PLC control
|
|
KKS 401 NA - Fully automatic universal cold sawing machine
KKS 401 NA is ideally suited to the processing of flat, angle and solid materials as well as tubes and special profiles. A turntable for acute mitre angles, automatic calculation of cutting speed and sawblade feed, as well as different drive variants and magazines for preliminary material storage, make this machine a real allrounder.
High performance and efficiency combined with simple handling
Short cutting times and cycles: automatic cutting height adjustment, rapid return stroke of sawblade and synchronised procedures
CNC control for preselection of cutting angle
Graphic display with touch screen monitor
High level of automation by automatic material feed and sorting of trimcuts/end pieces and cut-offs
|
|
CNC vertical sawing machines, with HSS circular blade, to cut steel solids and sections up to 180 mm diameter
|
|
EDGER - OXIA
SIMPLE, COMPACT AND VERSATILE
* 4 variable products.
* Boards and planks.
* Sturdy.
Options :
* Chipper.
* Waste separator.
* Automatic infeed.
* Sawing from above going downline with protective tunnel at exit.
* Effective, safe holding of the wood thanks to 5 pressure rollers and 1 chain belt.
* Very good sawing quality and thinner kerf saw.
* Fast blade changing.
* 1 to 4 movable blades positioned by servo-motors + 1 fixed sleeve.
* Diode lasers.
* max. cutting height: 125 or 150mm
* Pass width: 1000mm
* Speed: 10 to 110 m/min
* Motor 55kW to 160kW
* Weight : 6000Kg.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
|
Twin-blade mitre saw for notching board and panel corners. Equipped with two independent mobile fences for both square- and rectangular-section cuts. A vertical pneumatic clamp assures grip of the panel or the panel stack.
|
|
|
|
|
|
CONDOR 90 CNC HR electropneumatic automatic sawing machine to cut aluminium and light alloys, using a widia blade.
Besides in the automatic mode, it can be used also in semi-automatic cycle.
CNC machine with multimicroprocessor so as to obtain at 0°, on the same bar,32 different lots each of different lengths and quantities. The machine is supplied predisposed to operate together with the loading magazine CB 6000 for high production.
A FEW FEATURES:
2 pole motor at 2800 rev/min with double belt transmission
Widia blade with electrowelded hard metal plates diameter 300x32x3.2mm Z72 positiv rake, balanced and silenced.
Cabinet for electric and electronic fixtures with totally identifiable wiring.
Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena.
DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- number of cuts programmed and carried out
- blade thickness - length fed in each stroke
- cutting time
- ampermeter
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
Feeding system by means of screw/nut with recirculating balls and stepper motor, length 1000mm with feed in up to 9000 mm/min.
Minimum restpiece which cannot be fed in in automatic is 70mm.
Feeder carriage which has a sideways movement so as to feed in also deformed bars.
Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
Automatic device for blade lubrication which operates only while cutting.
Drawer to collect chips.
Chip conveyor is predisposed to mount a chip collector.
The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
Acoustic indicator with flashing light in case cycle is stopped.
Machine predisposed for handling with movement equipment.
Service keys and instructions manual, for maintenance and spare parts list.
|
|
|
|
|
|
Universal combined machine 350 mm
Elite Serie: the Combined Machines for the professional woodworker. Technology, design, innovation and quality: 100% made in Italy. The Universal Combined Machines of the “Elite” Serie represent the TecnoMax solution for the handcrafts who are looking for a compact machine without renouncing a top quality end product. The rapid machining changeover, the possibility to compose the machine according to the one’s requirement, and the same performance of the single-machining models are the main qualities which characterize this new range.
The new saw unit is made of a strong cast-iron structure. It is tightly fixed under the table and can be tilted by means of two side supports (trunnions): these solutions grant sturdiness, rigidity and a perfect cutting result. Furthermore, on request, the unit can be equipped with scoring unit for an optimal cutting even on upgraded panels. The sliding table is made from extruded anodised aluminium with a closed, honeycomb structure. The carriage runs on an exclusive slideway system consisting of guides made from calibrated and hardened F550SX steel. The spindle moulder unit is designed to provide the maximum stability and rigidity under all working conditions. Top performance features include: a large-size, cast-iron moulder spindle; a large distance (230 mm) between the two bearings on the moulder spindle; the possibility to mount tools at a minimum distance (5 mm) from the first bearing.
|
|
DIACUT 21OO / 22OO
Laboratory padsaw for curve and contour cutting
Internal cut-outs and contours:
These machines enable you to produce any imaginable cut-outs and reliefs in fibreglass, laminated paper and aluminium plates quickly and exactly, e.g.: cut-outs in fibreglass plates for the production of test adaptors or solder frames, rectangular, square or circular cut-outs for measuring instruments, displays, code switches in aluminium front plates or plastic housings, etc.
A clean, straigth cutting guide can also be achieved by manual guidance, as no delay is encountered because of the stroke movement of the tool, as is the case with rotating millers, for example.
A drilling table is integrated on the right machine side with which the outlet bore for the following saw cut in internal cut-outs can be produced.
CBN and HSS padsaw blades can be delivered as accessories for almost all materials.
|
|
|
|
|
|
FOR DEMANDING PROFESSIONAL WOODWORKERS AND SMALL TO MEDIUM INDUSTRIES
SC 450, NEW CIRCULAR SAW WITH TILTING BLADE FROM CASADEI
SC 450 is the new circular saw from CASADEI, a well known and long-established company which boasts broad experience in the woodworking machines field.
Simple, fast and precise SC 450 is offered as a solution either for demanding professional woodworkers or for small to medium industries.
The CASADEI SC 450 circular saw mounts a brand new sliding table with a sliding system running on ground and hardened steel guides, fixed through a mechanical bending system where no glue is used. The on-off switches for the blades can be integrated, as option, into the sliding table end: this guarantees a more functional use, especially during the panel loading operations.
The sliding table can be locked in any position along its length.
Furthermore the sliding table mounts a large-size squaring frame supporting work pieces, which is easy to remove in case of smaller size work pieces machining.
The SC 450 is equipped with a new cast iron saw unit, which slides vertically on smooth and precise round bars system.
The saw unit can tilt up to 45° on two solid cast iron trunnions, in the shape of a crescent.
The main blade maximum cutting height is up to 150 mm, even for solid wood machining, and can cut at 3 speeds: 2500-3500-5000 revolutions per minute.
Upon request, this CASADEI machine can be equipped with an electronic programmer controlling all the axis:
- saw blade lifting and tilting
- parallel fence adjusting
- scoring blade lifting and alignment
|
|
Metal circular saw MK 251 B
For cutting reincorcement iron profils, tubes and solid materials.
Strong cast iron table.
Vise with locking handle and de-burring device.
Options
Steel stand for MK 251 B
Adapter to roller conveyers left or right side
|
|
Sawing with maximum efficiency
With automated operation including material transport, higher volumes can be sawn faster and at lower cost. A flexible sawing plant from Behringer reduces throughfeed times by up to 50% and considerably improves part availability, particularly where widely varying parts are being cut.
It operates on a practically unmanned basis - around the clock. The entire functional sequence is automatically monitored and controlled. Cutting range: up to 430 mm.
|
|
Item No. : DET-4SA & DET-4SAT & DET-6P
Product Name : Double End Miter Saw
MODEL: DET-4SA
CAPACITY
CARRIAGE Single rail
MAX. LENGTH OF CUT 48"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
MODEL: DET-4SA-T
CAPACITY
CARRIAGE Single rail
MAX. LENGTH OF CUT 48"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
MODEL: DET-6P
CAPACITY
MAX. LENGTH OF CUT 72"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
|
|
Haffner technology :
- Profile table out of steel.
- Strong cast metal construction of sawhead.
- Big cutting capacity - 2 profiles can be cut simultaneously.
- Eeasy positioning by means of roller supported carriage.
- Double supported tilting device.
- Safe from clamping by 2-pressures sytem.
- Double supported saw feeding device.
- Cutting lengths 3,4 or 5,1 m.
- Hydropneumatic saw feed.
- Correction scale for outside dimensions.
- Left aggregate fixed.
|
|
Sliding Table Saw,Sliding Panel Saw
high precise structure is adopted in guide rail
easy adjustable scoring blade
straight line type guide rail
for kinds of artifical board,solid wood board,PVC board
customize woodworking sliding panel saws with special desire
Technology Parameter
1 Length of sliding table: 2800mm/3000mm/3200mm
2 Power of main saw: 4KW
3 Rotary speed of main saw: 4000-6000r/min
4 Diameter of main saw blade: 300/30mm
5 Power of scoring blade: 0.75KW
6 Rotary speed of scoring blade: 7000r/min
7 Diameter of scoring blade: 120/20mm
8 Max sawing thickness: 75mm
9 Guide rail: straight line type
Sliding Table Saw,Sliding Panel Saw
|
|
Item No. : PS-8 & PS-10 & PS-12
Product Name : Computer Panel Saw
HIGH PERFORMANCE PANEL SAW / MOD.: PS-8 . PS-10. PS-12
PS- 8 (2650MM LENGTH OF CUT)
PS-10 (3250MM LENGTH OF CUT)
PS-12 (3850MM LENGTH OF CUT)
1) HIGH SENSITIVITY OPTICAL FIBER SENSOR FOR SAW RETURN CONTROL.
2) HIGH-PERFORMANCE SAW MOTION CONTROL.
3) TROUBLE – FREE IC CIRCUIT BOARD.
4) EXTREMELY FAST CUTTING SPEED.
|
|
AUTOMATICA E
Single-head, rising blade cutting-off machine with automatic cycle only for 90° cutting, equipped with N/C electric bar feeder with positioning tolerance in cutting down to ± 0.05 mm and automatic separator system for cut pieces.
|
|
|
|
|
|
SA-70NC
Solid Bar Sawing and Tube Cutting Machines
Shortest 25mm Crop Lengths Metal saw
SA-70NC – S ( HSS Saw Blade )
SA-70NC – U ( TCT Saw Blade )
SA-70NC – NF ( Non-Ferrous )
The new SOCO SA-70NC tube sawing machines incorporates the newesttube cutting technology with unparalleled functions. This revolutionary innovation brings you the shortest crop length available in the global market: 25mm (SOCO Global Patent). With capacity up to OD70 mm in solid bar cutting and tube cutting, it is guaranteed to bring you continuous savings and production.
Tube Cutting Machine Features:
• 25mm – The shortest Crop Length of any pipe cutting machine available in the market
• With the shortest crop lengths, the SA-70NC brings maximum material savings and more production
• Using a thinner and smaller TCT saw blade, there is lower initial investment in blade and long term savings in material
• HSS Saw blades may also be used, with standard built-in settings and cooling system, for even more savings on tube cutting
• TCT Saw Blade for maximum speed and performance in tube sawing and bar cutting
• Superior Speed : O.D.40mm Copper solid bar, L = 56.5mm,cycle time is 3.7sec
• Floating Feeding Carriage to ensure precise feeding and cutting lengths
• 6.5 Meters Tube and Bar Loading Magazine
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
|
|
TWIN ELECTRA SUN
Twin-head cutting-off machine with 3 controlled axes, automatic traverse of the moving cutting head and electronic control of every angular setting from 45° (internal) to 22°30’ (external) with accuracy of 240 places on each degree.
|
|
|
|
|
|
TK 145/20 CNC gold Exceptional double mitre saw.
Full protection with complete cover and front automatic lowering closure.
Special fabricated and welded steel bed frame with finish machined,
complete with slideways for the mobile head.
Double head tilting from 22°30’ / 90° / -45° operated by direct current
motors controlled by NC.
Noise deadening guaranteed by the complete enclosure and also
by acoustic insulation panels
Mobile head operated by direct current motors and controlled by NC.
Travelling speed: 24m/1’
Conveyor belt for chips removal
STANDARD PROGRAMS
- Single cuts
- Sequence of cuts
- Profile codes and profile heights stored in memory for automatically calculating cuts at 45°
- Loading of cutting lists originated from ABACUS/TEKNA program
- Wings cut
- Blade motor timeout: blade motor automatically turns off after an inactivity period of the machine
- Sequence of cuttings on bar: bar manual progress, variable cutting length, possibility to vary the cutting angle on any degree.
- Automatic motor start in manual cuts
- Possibility to work with inches
OPTIONAL PROGRAMS
- Extra-short cut - Extra-long cut
- Automatic in-sequence cuts
- Trimming
|
|
Bewo's automatic saws are built for strength and stability to guarantee high levels of production and durability over many years. Bewo offers 4 models: the SCF Quatro for high quantities and speed, the FCH, the ECH for heavy profiles and large dimensions, and the DCH, with its unparalleled speed.
|
|
|
|
|
|
SA-76NC ln-line
Extreme Speed Tube Cutting and Chamfering machine
HIGH PRODUCTION, FLEXIBLE and I2® SYSTEM
SA-76NC
The new SOCO SA-76NC tube cutting machine brings you the latest technology in tube cutting systems. This metal saw machine equipped with a 6.5/8.5/12.5 meters BTM ( Bundle Loading Magazine ) and a 2 / 3 / 4.5 meters output gate, the SA-76NC tube cutter offers unparalleled tube sawing output for tubes and pipes.
Together with SOCO control system, Touch Screen and i2® ( Intelligent Interface ) system, the SA-76NC tube cutting line offers precision and versatility, while allowing for quick setup times between different tube dimensions lengths.
SA-76NC in-line
Besides the standard tube cutting functions of SA-76NC, and the SA-76NC In-line may also be a part of complete Automation Cells for tubing. The working process is from Loading, Feeding, Pipe Cutting, Chamfering, Deburring , Air Clearing and Tube Collecting. It brings time saving as well as higher throughput and performance.
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
|
|
|
|
