|
|
|
For precise industrial and water washdown requirements, there's a Champ Washdown Bench Scale that's just right for your application and budget.
|
|
Used for products with regular or irregular granulometry, like confectionery, pasta, vegetables, cut products, dried fruits, coffe, seeds, dried vegetables, etc.
IN A LINE
ELECTRONIC WEIGHING SYSTEM WITH 1 TO 4 HEADS IN A LINE.
In automatic versions to fit onto a bagging machine, or semiautomatic versions with a stand and working table.
FEATURES
Pneumatically actuated
Number of heads: one, two, three or four
Number of shakers: one, two, or three per lane.
CONTROL: Electronic with microprocessor. Data key-in using bagging machine keypad. Pre-dosage with fine-tuning with independent speeds, for the shakers and belt.
OPERATIONS:
Pre-bowl (accumulation to advance weighing). Automatic tare weight setting. Automatic weighing correction. Chute end management. Fine-tuning repetition. Memory for 20 different settings. Weight display on screen (built-in on Eva-260). Poss. vary discharge per cycle. Production statistics (totals). RS232 Printer output. Fast and tool-less bowl removal for cleaning.
|
|
By choosing the balances and rockers Arpège Master K you have the guarantee of a large manufacturer who has of legal approvals and certifications necessary, his own research departments and means of production in Europe and Asia to remain with the point of the performance and quality at competitive prices
Balance of Tablier table out of stainless
315 mm * 315 mm
400 mm * 500 mm
|
|
Weighing hopper
For the weighing and the storage of various products
INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
BA 4 Receiver of load to 4 sensors painted steel Base and apron
BA 4 Receiving stainless of load to 4 sensors stainless Base and apron
|
|
By choosing the balances and rockers Arpège Master K you have the guarantee of a large manufacturer who has of legal approvals and certifications necessary, his own research departments and means of production in Europe and Asia to remain with the point of the performance and quality at competitive prices.
Balance of Tablier table out of stainless
230 mm * 260 mm
|
|
MASTER Series 410 SRS/SRC
maximum capacity 300 kg
Solid and reliable scales, for rough use year after year
Strain gauge platform SRC (380x500) stainless steel IP 67
Strain gauge platform SRS (400x500) steel platform IP 65
• Rugged Scale with stainless steel platform
• Choice of two terminals
• Practical and user-friendly
• LC display with backlight
• Battery operation
• RS232 interface
• Units kg and lb
• 2 years warranty
Terminal SRD, ABS or stainless steel IP 67
• Large LC display with backlight
• Battery operation
• Units kg and lb
• Check weighing program
Terminal SRM, ABS or stainless steel IP 67
• LC display with backlight
• Battery operation
• Counting, units kg and lb
• Direct: - ID and date settings
- tare entry
- reference weight entry for counting
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
Chatillon crane scales and dynamometers deliver optimum performance for weighing tension, traction and weight. We offer mechanical and digital readout scales that are ideal for industrial applications, warehouses, shipyards, terminals, etc.
|
|
|
|
|
|
Warning: Models HTS with Max >= 3.000 kg only available on pallet
10 tare memory units, 10 unassigned memory units, e.g. for weight increments or identification numbers, summation storage, adds up all individual weighing processes (TOTAL)
Charge condition indicator for rechargeable battery, visual by means of LED
Adjustment program CAL. External test weights available at an additional price
Rechargeable battery pack internal, standard. Operating time approx. 150 h, charging time approx. 15 h. Models until incl. Max = 1.500 kg internal, through mains adapter, For models from Max = 3.000 kg external. Batteries can be reordered at any time
Luminescent LED display. The intensity can be adjusted in 2 stages to preserve the battery. Models with Max until 1.500 kg incl., digit height 25 mm, with Max from 3.000 kg, digit height 30 mm
Infrared remote control standard. Range approx. 15 m. All functions are selectable. Input via numeric key pad, incl. protective case WxDxH 200x80x28 mm, batteries Size AA (2 x 1,5 V) included
Hook with safety catch, revolving
Standby function. Automatic switch-off of the display after 5 min without a change of load. Reactivation of unit with the touch of a key
|
|
Phantom Crane Scale
Phantom crane scale is one and first crane scale with loadcell,indicator,control unit and design , produced in Turkey.Its 1-2 and 5 tones.There are remote control unit and serial printer output as option.It is used for any material weighing on the crane.
Checkweigher
Checkweigher, offers the weigher control of packaged products carried on the conveyor belts. After weighing, the packages wich have less or more weight are removed from the belt manuallty or by means of air. As the measurement is completed, all results are recorded for reporting.
Depending on the application, the system might included one belt or three belts as infeed, weighing and outfeed belt. Checkweigher with three belts are used to separate the products from each other and to organize them at the exit. It is easy to install and use with its user friendly interface and an ideal tool for quality control departments.
|
|
Around the world, cranes are used to load ships, vehicles and containers. Casting and charging cranes handle material flows in foundries and steelworks. These materials must be frequently, reliably and accurately weighed, and without any delay.
Schenck Process supplies the perfect solution: electromechanical crane scale systems for all required classes of accuracy, customised for specific projects and applications, from systematically planned standard solutions through to customised design.
|
|
Lifting accessory in accordance with CE directives N°89/392 - 91/368 - 93/68 and European Standards N° EN 292 - EN 55 022 - EN 50 082.2
Display with red light-emitting diodes (LED)
Height of digits : 25 mm
Ambient temperature range : -10°C to +50°C
Weatherproof and dustproof : IP65
Material : body in aluminium alloy
Finish : painted
Top suspension shackle - Bottom hook with catch
Power supply : 6 V, 12 AH rechargeable battery.
Power consumption : variable, depending on the setting of the functions
Battery life : 15 hours, but variable, with fully charged batteries (alkaline)
Accuracy : +/- 0.2% of capacity, or better.
|
|
|
From 50kg to 400T, these autonomous devices of weighing offer a display of weighing very legible. They have an excellent reliability and allow a large repetitiveness combined with many options which make easier the reading and the functioning (printer, sum of weight, return on PC, deported display…).
|
|
|
|
|
|
Today's metal service centers and similar facilities require more accurate weight data for the products they ship and receive. They also want to move their products faster and less expensively.
Bushman AvonTec combines the two processes, joining our rugged material handling equipment with the most advanced electronic load weighing equipment to give you fast, accurate and repeatable digital weight information.
Incorporating the load weighing equipment directly into the material handling gear results in:
- Eliminating the need for floor scales, thereby increasing usable floor space
- Limiting product handling significantly reduces product damage
- Increasing throughput by reducing material handling time up to 50%
Features Include:
- Accuracy from plus or minus 0.1% to 0.3% of actual load within the resolution of the display
- Proven, commercially available electronic components
- Calibration settings saved in memory even during loss of power
- All Bushman AvonTec products conform to the latest revision of ASME Spec. B30.20 and BTH-1: Design of Below-the-Hook Lifting Devices.
|
|
Axle Weigher
The Yamato Axle Weigher is installed in highway tollbooth approach lanes and automatically checks the individual axle in motion against presettable limits giving both signal and warning of a violation.
The vehicle total gross weight is also calculated and displayed.
|
|
1 apparatus = 3 capacities of lifting.
Conceived for the measurement and the control of loads.
Portable, light, with triple scale of reading, bill-poster LCD of 25 mm to 6 digits, keyboard seals with 4 keys, automatic waking state, precision + 0.03% on the most precise scale, manilles galvanized, Indice of protection IP 54, infra-red remote control .....
Available on request:
Professional range: of 150 kg to 9 tons, version stainless with protection IP 65 and version for crane
Range high capacity: from 12 to 55 tons
Range ATEX: of 600 kg to 35 tons
|
|
- A compact measuring device for weighing loads during lifting.
- Appropriate tackle can be attached to assist in the lifting and weighing.
- The crane weighters have a liquid crystal display(LCD),which can tare as well as show either the gross or net loads.
- It also indicates the load protection at 110% of the gross weight and the status of the battery.
- Conforms to CE safety standard.
|
|
RON Industrial crane scales are used for weighing during lifting and for overload prevention.
The RON 3025 series are compact crane weighers and digital crane scales.
The RON 3025 digital crane scale has a robust extruded aluminum body. Absolutely no castings in the unit.
The digital crane scale's large LCD display can be read at a considerable distance, even in sunlight.
The compact dimensions of the crane weighers ensure minimum headroom loss.
All digital crane scales are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
2000 hour battery life - applicable to all RON crane scale, dynamometer and load cell series and load cells with built-in amplifier:
RON Crane Scales excel in high quality, are based on the latest technologies and comply with the strictest safety standards.
All RON Crane Scales are made of the highest quality, aerospace steel.
|
|
Crane weighers
Measuring range 0 - 12 t
The crane weighers TKA and TWF are compact measuring devices for the weighing of loads.
- with digital display model TKA
Features
- High accuracy
- Lightweight design
- Easy-to-read display
- Easy to use
- Excellent quality
- Robust design
- Housing swivelling 180°
- Retains the peak value to memory
- Rechargeable, with integrated storage battery
|
|
SPECIFICATIONS
Model : Primo 10 Head 2.5L
Weighing range : 5g - 7 lbs
Weight accuracy : 0.3 - 1g
Speed : up to 75 bags per minute
Structure : Stainless steel
Display : Color touch screen
FEATURES
Stainless steel construction
Total digital control logic
Microprocessor operated
Store recipes in memory
Tool-less dis-assembly for quick washdown
Interfaces with any type of packaging machine
|
|
SPECIFICATIONS
Model : Primo 14 Head 1.3L
Weighing range : 5g - 7 lbs
Weight accuracy : 0.3 - 1g
Speed : up to 120 bags per minute
Structure : Stainless steel
Display : Color touch screen
FEATURES
Stainless steel construction
Total digital control logic
Microprocessor operated
Store recipes in memory
Tool-less dis-assembly for quick washdown
Interfaces with any type of packaging machine
|
|
SPECIFICATIONS
Model : Primo 14 Head 2.5L
Weighing range : 5g - 7 lbs
Weight accuracy : 0.3 - 1g
Speed : up to 120 bags per minute
Structure : Stainless steel
Display : Color touch screen
FEATURES
Stainless steel construction
Total digital control logic
Microprocessor operated
Store recipes in memory
Tool-less dis-assembly for quick washdown
Interfaces with any type of packaging machine
|
|
SPECIFICATIONS
Model : CS-14 SB
Weighing range : 5g - 7 lbs
Weight accuracy : 0.3 - 1g
Speed : up to 120 bags per minute
Structure : Stainless steel
Display : Color touch screen
FEATURES
Stainless steel construction
Total digital control logic
Microprocessor operated
Store recipes in memory
Tool-less dis-assembly for quick washdown
Interfaces with any type of packaging machine
|
|
|
|
|
|
HI 4050 Weight Controller
This weight controller / weight indicator acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone for simple control or weight monitoring.
Modularity – Configure the HI 4050 weight controller to suit your applications:
- Specify it with or without a display
- Choose either AC or DC power
- Add some Digital I/O
- Select a communication network: Analog, DeviceNet, EtherNet/IP, Allen-Bradley Remote I/O, Profibus, or Modbus TCP/IP
- Choose between a panel/remote mount and a DIN rail mount. With a display, you choose either to panel mount the entire assembly, or to mount the controller housing assembly remotely.
Ease of Installation: Installation is easy, with no special tools or expertise required. Just drill five to nine standard holes in your panel, and attach the front panel keyboard display. There is no rectangular cutout required. The controller housing can be attached to the rear of the panel or remotely up to 100 feet away to a DIN rail. Need to replace an HI 2151/30WC or HI 2110WI? Just drill four holes and plug the HI 4050 controller in.
|
|
|
The SPC multihead weighers are made with Stiavelli usual care and quality and exploit the wide experience grown in over 20 years of production of weighing and packaging plants for different food industries.
|
|
|
|
|
|
Multi channels weight transmitter type G4-RM
The G4-RM transmitter is a new generation of multiple weighing transmitter / indicator.
It is based around a main frame with:
One LCD screen two lines 16 characters
A 4 keypad pannel
One CPU unit with RS232; RS485 serial communication in Modbus RTU, an one Ethernet communication interface in Modbus TCP for easy connections to PLC & supervision.
The CPU card is also equipped with a USB connector for Back Up and restore or for a printer / key board connection.
The G4-RM can also handle up to 6 weighing channels through the WF-IN1 and WF-IN2 weighing cards with an internal 24 bits A/D converter and can reach a speed reading of 300 readings / sec or up to 1200 reading / sec with the weighing card HSWF-IN1 or 2.
Each weighing channel is equipped with 4 digital Inputs and 2 digital Outputs.
All set up can be done via the 4 push buttons keys panel or a dedicated software running on PC
All set up can be saved and restore on the internal memory or on an external USB memory stick.
Field buses: Profibus DP or Device Net can be installed on the CPU card as an option.
|
|
|
The NEW Series-C² is a combination Multihead weigher designe to weigh, at high speed and with extreme precision, various types of products. The working principle is based on the distribution of the product onto weigh buckets and on the identification of the best discharged combination, which is reached through an algorithm of combinatorial calculation, in order to obtain the best possible speed/precision relation. The Multihead weigher is subject to a mechanical customization based on the specific characteristics of product.
|
|
DOSATORE MULTITESTE
Our company collaborates with producers of Pesatrici Multiteste can therefore integrate our lines based on the requirements and demands for the customers.
|
|
|
|
