|
|
|
The BCM is the ideal solution for its line of production, if making responsible for the weight and doser of the most varied types of products, as: snacks, candies, biscuits, dry masses, fruits, bullets, and etc. The innovative system of weight with digital processor of signals "DSP" guarantees greater productivity and precision in its process. Constructed in robust, dumps-cart set in motion for engines the step and different sizes and forms of the linear vibratory gutters and rotating structure, becomes it versatile for the majority of the products.
|
|
- 10 head weigher,
- vibro feeding system,
- easy disassembly feed buckets,
- stepper motor drive mechanism,
- output up to 70 cycles per minute,
- accuracy below 1 gram,
- weighing range: 20g - 1000g,
- stainless steel construction.
|
|
Sartorius is more than just a supplier of products.
Working together with you, we will engineer a solution for integration of a weighing sensor (or a force sensor) into your equipment or machine.
Put us to the test – just contact us!
The overview of our range of weigh and load cells will help you narrow down your selection and give you an impression of the capabilities we can offer you.
|
|
Integration of MULTIRAIL concrete weighing sleepers without foundation and gaps,
for fully automatic dynamic weight acquisition.
Railway authorities use MULTIRAIL to monitor traffic, as prerequisite for effective track management: wheel loads, wagon weights, defective wheels, and uneven loads are checked at normal track speeds. Intelligent evaluation of measured data with on-line remote diagnosis offers high rates of reproducibility at maximum availability.
Wheel load test stands where new vehicles are manufactured and in maintenance shops
complete the range of RailTec.
|
|
|
Sartorius offers powerful process and system controllers for scales used in applications involving incoming goods and loading, filling and discharging processes, average weight control of prepackages, material acceptance and distribution as well as recipe management and batching processes.
|
|
|
|
|
|
Optimal solutions for tank weighing, level measurement and batching processes.
HBM tank weighing modules, electronics, and software meet the most stringent requirements for precision and reliability in all types of tank and batch weighing applications.
Our tank weighing modules help maximise machine reliability, product quality and repeatability in the following industries:
Chemical Industry
Almost limitless range of solutions, especially for potentially explosive atmospheres
Cosmetic Industry
Batch weighing of lifestyle, health, and beauty products
Pharmaceutical Industry
Maintaining the high quality of medicinal products
Animal Feed Industry
Ensuring the delivery of exact quantities of fodder to farm animals
Synthetic Material Processing
Weighing and batching of goods in the synthetic materials processing industry
Food Industry
Our hermetically-encapsulated load cells made of stainless steel provide a long service life with absolute weighing precision, even in damp, corrosion-prone environments
Steel Industry
Reliable results even at high temperatures
Building Materials Industry
Weighing and batching of heavy building material in silos e.g. additives for different types of concrete.
|
|
Whether storage tank or outdoor silo, batching tank, mixer or reactor – Sartorius offers tailor-made equipment for almost every process vessel scale.
In addition to rugged and particularly reliable load cells, this also includes a complete range of accessories: from GL-certified mounting kits to state-of-the-art process transmitters. Everything fits together.
• From a few kilograms to well over a thousand tons: the complete range for almost every process situation and accuracy specification
• 100% maintenance-free and highly reliable for the most accurate measurement values that you can trust
• Unique safety provided by mounting kits and constrainers certified by Germanischer Lloyd
• Complete range of instrumentation including digital process transmitters, process indicators and batch and system controllers
|
|
An extensive range of products for the use in the process industry, covering all accuracy levels, various automation needs and communication demands.
The applications range from level control by weight, flow by weight, bulk weighing of silos, standard batching, weighing and batching of agitated vessels and batching control in parallel including recipe handling in larger systems.
|
|
Combics - Weighing Platforms
…from 0.1 g to 3,000 kg, these are a whole new generation of rugged and flexible industrial scales.
• Accuracy 3,000e, 2 x 3,000e, class III; 15,000d, 30,000d
• 13 different sizes
• IP65 | IP68 | IP69K protection
• Finish: painted or various stainless steel grades
• Accessories include drive-on ramps, pit frames
• Stainless steel models can optionally be operated in Zones 2 and 22
|
|
|
Weight Indicator TAD 3 is intended for converting signals from strain gauge based load cells and force transducers into suitable indication or for PC or PLC based systems. As options, flow measurement and recipe controlled batching facilities are available. The high accuracy and very fast transmission rates make TAD 3 perfectly suited to advanced process control. TAD 3 is panel mounted.
|
|
|
|
|
|
HGX-1000 Weighing Indicator
With its privileged aluminium frame and included 3 digital inputs / 2 relay outputs feature,ability to communicate with PC and PLC systems HGX-1000 is a high precision digital indicator,which can be utilized in packing,dosing,tank weighing,silo weighing, etc.
Technical specifications
• Easy to read with 20 mm 5 digit 7 segment display
• High accuracy ,high speed
• 3 internal relay outputs
• 3 internal digital inputs
• Automatic or manual zeroing
• Counter option
• 20 Recipes / 6 processes
• Full, Empty and I/O indication LEDs
• Calibration via keypad
• RS232 serial output
• Power down data protection
• Adjustable digital signal filtering
• Full scale zeroing
FSM-2 Weighing Indicator
With its privileged aluminium frame,FSM-2 is commonly used in various weighing applications such as bench scales,silo and tank weighing weighing platforms.
HGX-2000 Weighing Indicator
HGX-2000 Digital weight indicator/control terminal is designed to perform complete automated solition for various weighing application. 2x20LCD character & 6-digit LED Display facilitate utilization of the product. Due to its modular infrastructure, it compensa tes requirements for PLC, PC and Operation Panel applications.
FSM-2 Exproof Weighing Indicator
Ex proof certified packaging box provided for the protection of product in chemical & petroleum industred , encompassing explosion risk.Technical specifications are similar to FSM/2.
FSM-2 S Weighing Indicator
With its privileged stainless steel box to be protected fromdust and water, FSM-2 is commonly used in various weighingappliances such as platform scales,silo and tank weighing etc.
|
|
Range of indicators powerful and versatile weighing:
- Approved 3000d or 3x3000d
- Panel mounting or box versions
- Comprehensive built-in functions covering a wide range of industrial applications: process control, filling, weighbridges, floor scales or on board weighing
|
|
|
Sartorius carries a wide range of control units, indicators and terminals for applications in production processes in the biopharmaceutical, chemical and food industries. This equipment extends from scales for simple weighing all the way to level cells for fill-by-weight level control and entire weighing networks for average weight control of prepackages.
|
|
|
|
|
|
Multi channels weight indicator type G4-PM
The G4-PM indicator is a new generation of multiple weighing indicators.
It is based around a main frame with:
One color LCD touch screen working under Windows CE
A 34 keypad pannel
One CPU unit with RS232; RS485 serial communication in Modbus RTU, an one Ethernet communication interface in Modbus TCP for easy connections to PLC & supervision.
The CPU card is also equipped with a USB connector for Back Up and restore or for a printer / key board connection.
The G4-PM can also handle up to 8 weighing channels through the WF-IN1 and WF-IN2 weighing cards with an internal 24 bits A/D converter and can reach a speed reading of 300 readings / sec or up to 1200 reading / sec with the weighing card HSWF-IN1 or 2.
Each weighing channel is equipped with 4 digital Inputs and 2 digital Outputs.
All set up can be done either on the touch screen or via the 34 push buttons keys pannel.
All set up can be saved and restore on the internal memory via the touch screen working under Widows CE.
Field buses: Profibus DP or Device Net can be installed on the CPU card as an option.
|
|
Setra's SuperViewtm weight indicator includes the SuperII's feature set and familiar, intuitive menu structure. Designed to interface to strain gauge load cell bases, SuperView will drive up to twelve 350ohm load cells and has checkweighing and counting functions built in, with no programming required to use them. 2MB of internal memory provides space for storing APWs, tares, etc, as well as an internal transaction log.
The SuperView features a new and unique touch-capacitance-sensing keypad, which has no moving parts therefore cannot wear out mechanically and is protected by a polycarbonate bezel to prevent physical damage. Additionally, the NEMA 4X washdown stainless steel enclosure makes the SuperView a great, low cost solution for wet and/or industrial environments.
|
|
|
The transmitters 1045 and indicating 1050 are particularly adapted to the most current applications of weighing with an excellent quality ratio/Prix. Out of standard: Galvanically isolated analogical exit, port serial RS485 MODBUS RTU, left RS232/RS422 codes ASCII, Fonctions Tares Car, GROSS/NET, Fonction Memo peak, detection of stability of the weighing. In option, Exit drunk of ground PROFIBUS DP or DEVICE NET. Assembly rail DIN for 1045 and table for 1050 with food 24 Vcc.
|
|
The LCIC-WIM allows to connect most load cells and scales to a PC via the popular USB or RS232/485 ports.
The LCIC-WIM was designed to fit all real-time weighing and force measurement applications, like:Checkweigher, Weighing In Motion (trucks and rails),Batching and filling systems, Testing machines etc. this product helps our customers to easily design their controllers saving them engineering time and money.
|
|
|
Weighing amplifiers and transmitters are available, for example, for networking platforms in control and automation systems. A choice of versions is supplied for the diverse hazardous area zone classifications and approvals.
|
|
AST 3P / AST 3IS
Analogue output ±10 VDC, 0-20 or 4-20 mA. Digital output RS-485, MODBUS and via GATE 3 fieldbus communication.
WST 3
Analogue output ± 10 VDC, 0–20 or 4–20 mA. Serial communications: RS-485, MODBUS RTU protocol. Fieldbus interface: Profibus DP.
|
|
Continous weighing system BEM type.
The weighing scales in continous are devices whose function is to control que quantity of production of any material in bulk on conveyor belt.
They are composed by two cells of weighing, a meter of speed and a microprocessor that indicates the data of instantaneous weigh, accumulated weight, speed of the belt, etc.
|
|
For many years PRECIA-MOLEN have been specialists in providing bulk weighing solutions. The key to this success is tailored solutions to meet process requirements concerning product flow, weight recording, control, traceability and communication with other data handling systems.
Dynamic bulk weighing
Dynamic bulk dosing
ABS hopper scales
Bulk scales for weighing of bulk goods
These scales incorporate all the features PRECIA-MOLEN has developed during its years of experience in the field of bulk weighing. The proven concept of one basic design for multi-purpose applications in intake weighing, transshipment weighing and out loading has been maintained in the ABS hopper scales.
|
|
The high performance counting machine Multicount combines all technical relevant opportunities of counting tablets, capsules, dragées etc. without changing product-specific change parts.
The feed system consists of 2 x 3 in series placed vibratory feeder each with 6 tracks.
Options:
- automatic container delivery
- vibrating funnels
- skipping funnels
- Tare-gross application
- Twin version
- IQ/OQ documentation
- reject with confirmation sensor
- Complete production lines with unscrambling table, bottle unscrambler, bottle air cleaner, capping machine etc.
|
|
Counting & Weighing Machine ZWA :
Compact, combined counting and weighing machine for small parts of all kinds.
With closed and mobile rack.
Microprocessor steering, individually programmable.
Counting and weihging devices.
Adjustments for 200 products can be stored.
Speed: approx. 5 meters/min.
|
|
|
The Ramsey DE10 and DE20 Impact Weighers are unique devices designed to measure the mass flow rate and total mass of free-flowing particulate materials. They provide a low cost, yet highly accurate, method of measuring the mass flow of dry solids and powders for inventory process control and can help you save thousands of dollars by reducing waste and improving product quality.
|
|
|
|
|
|
The LW 01 incorporates all the advantages of a field proven MULTIPOND combination weigher, with a mobile lift system. It can be used at various positions of a packaging line, as required.
The motor driven elevation adjustment with programmable positions, allows for the LW 01 to be easily adapted to varying transfer heights. When moved to the lower end position, all product leading parts are comfortably accessible, making cleaning very easy. The entire system is mounted on caster wheels and can be wheeled to a cleaning area as needed.
Standard features of the LW 01 Series
- Compact, dust and water-repellent design, for use in wash down environments
- Feeding tray drives integrated into machine body, therefore well protected against environmental influences
- Dehumidifier in weigher housing drains condensation moisture
- Frequency adjusted drives ensure ideal product conveying characteristics
- Temperature compensated strain gauge weigh cells, with integrated calibration weight for automated calibration, ensure high precision and controlled availability
- Automated, programmable zeroing sequence allows to account for product residuals in the weigh buckets
- Compact, modular control system including:
– 32-bit-technologie
– self diagnostic system
– extensive help text
- Various, self optimizing trending routines
- Programs can be saved locally and/or on memory cards
- Statistical reports according to European Weights & Measures legislation
- Operator interface – 12" TFT colour display with touch screen
|
|
|
Ishida has an extensive range of multihead weighers suited to many food and non-food applications. From entry-level to high-specification models, all Ishida's multihead weighers combine high-speed operation with unparalleled accuracy and reliability. They are pivotal to the improvement of efficiency and consistency on the production line. Our multihead weighers can be installed as part of an integrated weighing and packing line or interfaced with existing packing equipment.
|
|
|
|
|
|
12/14-S5 Series
Characteristics
Weigh pan volume: 2.55 litre
Portion weight: 1 g - 12 kg
Portion volume: max. 10 litre (10000 ccm)
Speed: up to 300 weighings/min.
Measuring range of weigh cell: up to 480 g / 2400 g
Increment: 1 g / 2 g
powerful + flexible
With speeds up to 300 weighings/min. depending on product and target weight, the MULTIPOND 12/14-S5 series of combination weighers are designed for the most diverse applications.
They have proved their efficiency both in high-speed as well as in mixing applications.
The prefeed, weighing and memory hoppers work with the twin flap opening system, which guarantees a complete discharge even of sticky products. The stainless steel hoppers have a volume of 2.55 litres.
By means of a specially designed pivoting unit each of the weigh hoppers feed product into two memory hoppers mounted underneath, where the weighed partial quantities are stored before being taken into combination. Mixing of up to 6 components of various products is possible.
|
|
|
|
|
|
01 Series
characteristics:
- Weigh pan volume: 1 litre
- Portion weight: 0.5 g - 1600 g
- Portion volume: max. 3.2 litre (3200 ccm)
- Speed: up to 450 weighings/min.
- Measuring range of weigh cell: 320 g
- Increment: 0.5 g
powerful + flexible
With up to 450 weighings/min depending on product and portion weight MULTIPOND combination weighers of the 01 series are suitable for a wide range of applications.
Preweigh and weigh hoppers have a volume of 1 l. The special plastic hoppers, an identification mark of MULTIPOND weighing technology, allow a particularly hygienic and gentle function of the weigher.
The twin flap opening system guarantees a complete discharge even of difficult, sticky product.
robust + accurate
The strain gauge weigh cells are automatically calibrated during operation at predetermined intervals by using internal precise calibration weights, thereby guaranteeing the highest accuracy and availability.
Drifting due to variation of temperature or humidity are thus eliminated.
|
|
01-BC Series, for gentle handling of delicate and fragile products
Characteristics
Weigh pan volume: 1 litre
Portion weight: up to 1200 g
Portion volume: max. 3 litre (3000 ccm)
Speed: up to 80 weighings/min.
Measuring range of weigh cell: 320 g
Increment: 0.5 g
new + unique
The MP 1401-F-BC is an absolute world´s first. It has been specially designed for delicate and fragile products and those of which the coating comes off easily. Conventional Multihead weighers are not able to handle these products with the required care.
By eliminating prefeed buckets and avoiding the use of chutes and outlet funnel the number of product dumps and the impact has been reduced to a minimum.
|
|
34 Series
Characteristics
Weigh pan volume: 6.5 litre
Portion weight: up to 12 kg
Portion volume: max. 26 litre (26000 ccm)
Speed: up to 140 weighings/min.
Measuring range of weigh cell: up to 2400 g
Increment: 2 g
powerful + flexible
The MULTIPOND 34 series of combination weighers are designed for weighing products of larger piece size and volume. The series includes weighers with 10, 14, 16 and 20 weigh heads.
The stainless steel prefeed and weigh hoppers have a volume of 6.5 litres and work with the known twin flap opening system.
|
|
|
|
