The Frick® SGC, SGCH & SGCB screw compressors are designed to compress a variety of ...
The Frick® RWF II Compressor Package line includes 13 models ranging in capacity from 592 CFM through 6,394 CFM, designed for use with ammonia, halocarbon, and hydrocarbon refrigerants.
Standard ...
The Frick® RXF Compressor Package line includes 11 models ranging in capacity from 71 CFM through 569 CFM, designed for use with ammonia, halocarbon, and hydrocarbon refrigerants.
Standard ...
MSC 30 - 45, MSD 55 - 75, RMC 30 - 45, RMD 55 - 75, RME 75 - 90 compressors are compact, easy to ...
The MSM Maxi 5,5 - 15kW range needs no more than 1m² to provide compressed air on your workspace. The CSM Floor mounted compressor can be used as an extension of your existing ...
The MSM Mini 2,2 - 5,5kW range needs no more than 1m² to provide compressed air on your workspace. The MSM Mini Floor-mounted compressor can ...
Hepta 100
Dry screw pumps with a pumping speed of 110 m3/h at 50 Hz and 130 m3/h at 60 ...
Hepta 200
Dry screw pumps with a pumping speed of 220 m3/h at 50 Hz and 265 m3/h at ...
Hepta 300
Dry screw pumps with a pumping speed of 320 m3/h at 50 Hz and 410 m3/h at 60 Hz:
Product ...
Low-pressure compressor unit (up to 2500 mbar g) with the following features:
- Silent operation
The high compression efficiency guarantees a low-noise generation, that, with the special silencers and the noise enclosure, allows a ROBOX screw low sound pressure levels: <70 dB(A) in every operation conditions.
- Maximum energy ...
Low-pressure compressor unit (up to 2500 mbar g) with the following features:
- Silent operation
The high compression efficiency guarantees a low-noise generation, that, with the special silencers and the noise enclosure, allows a ROBOX screw low sound pressure levels: <70 dB(A) in every operation conditions.
- Maximum energy ...
RSW is the oil free screw compressor, designed and developed by Robuschi: from the definition of the rotors' profile to the complete development of the compressor, which was expressly optimised to reach pressures of 2.5 bar (g).
Efficient: The profile was designed by Robuschi engineers in order to obtain the maximum capacity at a lower energy consumption. Moreover, ...
The B3S Series of rodless electric linear actuators is capable of accommodating heavy loads and handleing high moment loads with consistent, smooth operation. ...
TruTrack screw drive linear actuators offer straighter, truer, linear motion (within 0.0002 inches per inch) than any other Tolomatic linear actuator. The TruTack actuator guidance system uses ground linear rails and ...
The BCS Series electric cylinder guidance system uses a patented adjustable carrier bracket that transmits the load to the cylinder body instead of the screw for good tracking, superior ...
STAINLESS STEEL SCREW JACKS AND BEVEL GEAR BOXES
The use of stainless steel has had an exponential growth in the last years. New market demands, hygienic requirements in food industry and the applications ...
The use of stainless steel has had an exponential growth in the last years. New market demands, hygienic requirements in food industry and the applications in oxidizing environments require an higher ...
POLYMER TRAPEZOIDAL SCREW JACKS
New market demands, the growth of light applications and a spirit of innovation and research have pushed UNIMEC to realize a new trapezoidal screw jack series with an high price-quality ...
Available in versions from 180 up to ...
The construction consisting completely of stainless steel ...
• Ideal for the transport of powder, ...
Cincinnati Milacron's TC Series of Conical Twin Screw Extruders brings you technology to profitably manufacture a wide range of plastic products including wood and ...
The co-rotating twin screw extruder line is proven for the efficient, reliable and economic mixing, devolatilization and direct extrusion of Wood and Natural Fiber Plastic Composites. Applications ...
Cincinnati Milacron TP Series of Parallel Twin Screw Extruders combines space-saving compact design with the long proven advantages of Cincinnati Milacron extrusion technology for all your extrusion applications ...
The hydraulic fluid flows to the axial direction smoothly and extremely quietly because of no sharp pressure ...
The hydraulic fluid flows to the axial direction smoothly and extremely quietly because of no sharp pressure ...
The hydraulic fluid flows to the axial direction smoothly and extremely quietly because of no sharp pressure ...
Shafted Screw Conveyors
* Efficiently conveys dry to semi-fluid materials - free-flowing to sluggish
* Ideal for abrasive, corrosive or hazardous materials
* Construction available in carbon steel, abrasion-resistant steels, stainless steel ...
Shaftless Screw Conveyors Shaftless Screw Conveyor
* Efficiently conveys dry, semi fluid or sticky materials.
* Alloy steel spirals are available in hardness up to 300 BHN.
* Can be equipped with metallic or non-metallic liners and/or wear bars.
* No central shaft or hanger/bearing to snag material or decrease conveyor capacity.
KWS ...
Vertical Screw Conveyors
* Efficiently elevates dry to semi-fluid materials - free-flowing to sluggish
* Ideal for capacities up to 6,000 cubic feet per hour and elevations up to 40-feet
* Available in both shafted and shaftless designs
* Construction available in carbon steel, abrasion-resistant steels, stainless ...
The compact, lightweight, mobile continuous mixer for mixing ready-mix dry mortar. The CM528 can be used ...
If you want to process mineral, cement-based dry material, the Stromixer D 1000 is the ideal supplement to our Strobot 401 S and Strobot 406 S without ...
The SP11 Beliso range of worm pumps offers an impressive, sophisticated design and simple operation. The machines are suitable for site mixes or bagged interior and external rendering, coloured ...
Bandera range of co-rotating twin-screw extruders has recently been included into pipe extrusion lines. Its application proved to be extremely advantageous when production needs allow for material direct extrusion in any shape, thus becoming the winning solution in applications ...
Bandera range of counter-rotating twin-screw extruders has recently been reviewed to improve performance not only in terms of hourly outputs, but also of better component ...
Bandera single-screw extruders exemplify the company ongoing development aimed at foreseeing future market needs. The "home made" screws and barrels allow for dedicated solutions of:
Screw design
...
