|
|
|
|
|
|
S compact range
Clear layout in three sections: easy access to all components
Acoustic atenuator in the air inlet fitted as standard: very pleasant sound pressure level as standard with simple upgrade options to ultra silenced or cooling air exhaust ducting
Nylon laminated, sound insulated fibre mat lining: reduces sound pressure values. Dirt repellent and washable
Modular design using the standard component assembly system
Switch cabinet to DIN and VDE; IP 55 enclosure protection: clearly laid out and protected against dirt
State-of-the-art screw profile: small specific power requirement, excellent economy
High efficiency, class F,
IP 55 motor with PTC-resistor protection: long reliable service life enhanced by design location in cool area of package
ARS control and monitoring system: customised, convenient, economical, reliable
Patented GM belt drive system with constant belt tension: virtually maintenance free belt drive system
Horizontal oil reservoir and pre-separation vessel, removes more than 99% of oil, minimizes oil foam effect with zero pressure drop: ensures consistent residual oilcontent of only 1-3 mg/m³ in every operating phase
Valveless oil circulation system with no oil stop valve or check valve: high operational reliability
Vibration damping between compressor and base frame: no transmission of structure borne sound
Torsionally rigid, base frame for problem free transport fork-lift truck or pallet truck: easy positioning
|
|
We are manufacturers of screw compressors from 3 to 90 kW. Output 14,5 m3/min
(512 cfm) and pressures up to 15 bar (215 psig).
Our compressors are robust with simple and low-cost maintenance features.
With their energy saving asymmetric profile they are designed and proved for rigorous industrial use.
|
|
With ES 3000 energy safer.
This control system performs all operations related to
use of the compressor:
* It performs function checks.
* It provides information about any defects and
irregularities.
* It stops the machine in emergencies.
* It provides the most effective tuning to adjust the
clearance time as efficiently as possible.
Also equipped with:
MultiControl: This system has 3 switch settings:
* On/Off intelligence. Switches when there is little air use
* Modulating. Provides constant pressure with a constant air
use.
* Automatic. This setting combines bothe above settigs.Screw block type Airpress FS 1.5
Motor capacity (HP/kW) 75.0/55.0
Sound level (dB(A)) 71
Dimensions (l x w x h, cm) 110 x 164 x 180.5
Weight (kg) 810
Air connection ('') 1 1/2
Electric tension (Volt/Hz/Ph) 400/50/3
Fuse (A, slow) 125
Intake capacity (l/min) 8630/7800/6420
Ordernr: Code
36475 APS 75 B
|
|
Champion_Logo_Always_webChampion RotorChamp
40, 50 hp
Product Styles- RCS40, RCS50
Premium Efficiencyefd-rotochamp.jpg
Precise rotor profile offers less slippage than competitor offerings to offer a wider band of operating efficiency relative to rotor speed.
Small Footprint
Offers the smallest footprint for its HP range in the industry to maximize your available floor space.
Easy Serviceability
25% fewer parts and superb engineering contribute to one of the most service friendly units available.
|
|
Simple installation in a wide range of positions.
Limited Checks and maintenance.
Quite operation owing to high precision in machining and assembly.
Two rotors with asymmetrical profile constructed with high strength steel.
Innovative assembly system for easy repairs.
ELGI's heavy duty compressor units or airends offer increased FAD per horse power with an extensive service life.
|
|
|
|
|
|
The Cloupressor: BOGE SLF
A frequency controlled screw compressor. By changing the speed of both motor and air end the SLF can operate the air end in its specifically optimum range and adapt the compressed air output to the actual needs. Expensive idling times and motor switches are avoided. At the same time a smaller pressure band can be set, also helping to save enrgy.
Special benefit: By adjusting the air end speed by frequency regulation not only the FAD can be adjusted but also the pressure value! Usual frequency controlled screw compressors only change the FAD at a certain given maximum pressure. Lowering the pressure value did not result in a higher FAD. But with the SLF adjusting the pressure value will at the same time result in an adjustment of the maximum possible FAD! This way a 13 bar model easily can be switched to an 8 bar model including the higher volume flow of an 8 bar machine. There are no alterings or constructive changes necessary. All pressure values can be served with one machine.
New models up to 160 kW / 220 PS!
SLF 30 - SLF 221
Direct coupled & oil injection cooled.
Effective FAD: 1,06 - 28,21 m³/min
Pressure range: 8 - 13 bar
Drive rating: 22 - 160 kW
|
|
The SF series wotks strictly in accordance with the compressed air demand. It produces the exact amount of compressed air requirement in the most economical way.
Frequency control minimize idling time and evens out air demand fluctuations.
|
|
With reference to rising energy costs RENNER frequency controlled compressors have proven to be the right choice. Particularly in those cases where the air consumption fluctuates but also for peak-load machines this system is the ideal solution to safe energy.
The output of the compressor is adapted to suit the actual air demand using the infinitely variable electronic speed control.
|
|
We are specialized on manufacturing and marketing of screw compressors up to a capacity of 14,5 m3/min (512 cfm) and pressures up to 15 bar (215 psig).
Smaller machines can be mounted on horizontal air-receivers – ready to operate.
A wide range of accessories is also available, e.g. refrigeration and adsorption dryers, filters, air-vessels and others.
|
|
Screw Compressor Units
- Refrigeration and gas compression, covering a broad range of applications
- Halocarbons, hydrocarbons, NH3 & CO2: 25 models from 70-6400 cfm (120-10,875 m3/hr)
- Slide valve delivers full range of capacity control
- Variable volume ratio (Vi) self-adjusting for peak off-design efficiency
- Antifriction bearings simplify lube oil system by eliminating the need for an oil pump
- D-Flange drive (optional) eliminates field alignment
|
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available.
|
|
|
ELGI presents the next generation TANDEM compressor. The EE series is remarkable engineering revolution in air compressors. Carrying forward the core benefits of its predecessor, the new Tandem compressor brings tremendous power savings from 11-13 %.
|
|
|
|
|
|
Economical due to flexibility
Screw compressor CLF with frequency control
Special Feature:
By adjusting the airend speed utilising frequency regulation not only adjusts the output (FAD) but can also adjust the pressure (bar). The CLF machines can therefore operate at 8, 10 or 13 bar pressure without compromising free air delivered. To regulate a normal 13 bar compressor to 8 bar reduces the pressure but the output remains at the 13 bar design figure. The direct driven CLF, utilises frequency regulation in order to maximise FAD output whether at 8, 10 or 13 bar!
CLF series
Direct coupled, without v-belt or gearbox, reduces transmission losses to a minimum.
The BOGE CLF series combines a direct coupled drive system with frequency control to provide the ultimate compressor for pressure control under variable output requirements.
The CLF series operates the airend within its optimum range and by changing the speed of both motor and rotor the compressed air output adapts to the actual demand. Expensive idling times and motor switches are avoided. At the same time a tighter pressure band can be set, also helping to save energy.
Effective FAD:
0,25 - 1,27 m3/min
9 - 45 cfm
Pressure range:
8 - 13 bar
115 - 190 psig
Rated power:
7,5 kW
10 HP
|
|
|
|
|
|
The rotary screw air compressor has become the most popular source of compressed air for industrial applications. A major reason is its simple compression concept.
Air enters a sealed chamber where it is trapped between two contra-rotating rotors. As the rotors intermesh, they reduce the volume of trapped air and deliver it compressed to the proper pressure level. This simple compression concept, with continuous contact cooling, allows the rotary screw air compressor to operate with temperatures approximately one half that generated by a reciprocating compressor. This lower temperature enables the rotary screw air compressor to operate in a "fully loaded" continuous duty cycle 24 hours per day, 365 days per year, if necessary.
Its ability to operate for extended periods of time makes the rotary compressor ideal for demanding industrial applications.
Designed to provide pulsation-free air 24 hours a day
100% continuous duty
Quiet operation
Energy efficient at full load
Extended service intervals
Reliable long life
Improved air quality
|
|
The Quincy QGV provides the most stable pressure available from a compressor with 85% turndown. The QGV is based on Quincy’s time proven QSI airends with 100,000 hour design, providing low cost of ownership, easy maintenance and reliable operation. Enjoy real-time performance monitoring with graphical analysis and SuperiAir™ full-color, touch-screen control on 50-100 hp models.
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
Champion RotorChamp
20, 25, 30 hp
Product Styles- RCS20, RCS25, RCS30
Premium Efficiencyefc-champ.jpg
Precise rotor profile offers less slippage than competitor offerings to offer a wider band of operating efficiency relative to rotor speed.
Small Footprint
Offers the smallest footprint for its HP range in the industry to maximize your available floor space.
Easy Serviceability
25% fewer parts and superb engineering contribute to one of the most service friendly units available.
|
|
|
|
|
|
PURGE type/SMS-S series
S series with great cost performance
▪ "Purge unloader + Auto-start/stop device" are equipped for saving energy.
▪ Applicable to some function such as alternate operation and remote control.
▪ Extended maintenance cycle to reduce operating expense.
E·CON type/SMS-U series
AIRMAN ORIGINAL ENERGY SAVING SYSTEM
Perform efficiently more than inverter
▪ AIRMAN unloader system reduces on power consumed at unload operation to about 20%.
▪ ACCS (AIRMAN Computer Control System) is to reduce full load power by about 5%.
▪ Applicable to some function such as alternate operation and remote control.
INVERTER CONTROL type/SMS-V series
Original inverter control to save energy efficiently
▪ Maximized use of motor output, service air volume is increased by using pressure.
▪ Corresponding with change of air volume used without loss to save energy.
▪ Constant control of pressure enables to operate at the lowest required pressure and not to waste it.
OIL FREE type/SMAD series
Compressor supplying clean air excluding oil
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
Simple & Compact - ROTORCOMP Encapsulated Units - NK Range
ROTORCOMP's oil injected NK-Range, designed for a power range from 2-45 kW (3-60 hp) has taken the compressor market by storm. Customers value the reliability, compact design and easy handling of this product range. NK-Modules incorporate seven components in a single housing: air filter, intake valve, air end, oil receiver, separator system and thermostat.
|
|
- Atlas Copco screw compressors have always set the standard for reliability and performance in the compressed air industry.
- With the new GX 2-11, Atlas Copco brings the power and reliability of an industrial screw compressor to small and medium sized industry.
- Traditionally, light industry has had to settle for inefficient and noisy piston compressors. The GX 2-11 deliver Silent Power and Simple Reliability.
- The advanced sound dampening of these units insures Silent Power. The sound level of the complete package is only 61 to 68 dB(A)
- Total Reliability is insured as Atlas Copco screw compressors are suitable for 100 % continuous duty. Additionally, the number of components has been kept to a minimum so simplicity is designed in from the start.
|
|
The compressor delivers pulsation free air. By continuously matching the speed of the drive motor to the air net pressure, the compressor optimises energy consumption and reduces the operating pressure bands.
The range is available as aircooled or watercooled. A Full Feature version is also available where a refrigerant dryer is installed, integrated in the bodywork. A dryer bypass is installed as standard on the Full Feature machines. Some series have an integrated VSD dryer as well.
|
|
Atlas Copco GA range of oil-injected screw compressor is intelligently packaged, incorporating all vital air compressor installation accessories and options into one compact enclosure.
Evaluate the GA range: it is designed to meet your selection criteria.
|
|
- 15-50 kW (20-67hp)
- 7.5 and 8.6 bar(e) - 110 and 125 psig
- 37-125 l/s - 2.2-7.5 m3/min - 78-265 cfm
Oil-free... risk-free: When it comes to compressed air, oil-free air is no longer the privilege of exotic production processes. It is simply the preferred solution for many compressed air needs. Will there be oil-free air in your future? Evaluate the product characteristics with your selection, the ZR/ZT15-50 range.
- 100% Oil-free Air
- No condensate management problems
- Operator friendly and easy to service
- Consistent performance over the product's lifetime
|
|
This next generation of oil-free screw compressors combine a wider pressure range and a higher flow rate with a lower specific energy requirement.
Minimal external piping, a very low vibration level and high mechanical integrity ensure a trouble-free future.
|
|
A smooth production process, a quality end product, the lowest operating and maintenance costs and ensuring a healthy environment . These are the inherent qualities of oil-free air compression. Evaluate the products and make the right selection: the ZR/ZT range.
|
|
|
Atlas Copco is the leading manufacturer of portable compressed air machines in the world. Used in a wide variety of industries, Atlas Copco has developed a set of machines that successfully walk the line between size, output and capacity.Drilling is a high intensity business where every second counts, and there is no room for error or failure. The 25 Bar (365 psi) machines from Atlas Copco are the most durable and robust machines in their class, and as such they lead the industry. These machines are flexible and multi-purpose: from demanding large rotary blast holes, deep-hole drilling to large diameter pipeline cleaning. Adapted to working in difficult conditions and extreme temperatures, they are the natural choice for deep-hole drillers and the Oil & Gas industry.
|
|
|
|
|
|
TRAILER type/PDS series
Compressor supplying air energy at construction site
▪ Available in a wide range of models to meet your need.
▪ Featuring sound-proof structure and low noise, easy operation, and completely monitoring system.
▪ High-performance compressor with proven reliability and high efficiency.
HIGH PRESSURE type/PDSE,F,G,H,J,K series
Compressor supplying high pressure air
▪ AIRMAN original screw design enable to supply high pressure air.
▪ Suitable for foundation job such as jacking method, down the hole method, and large boring construction.
BOX type/PDS series
Compressor supplying air energy at construction site
▪ Available in a wide range of models to meet your need.
▪ Featuring sound-proof structure and low noise, easy operation, and completely monitoring system.
▪ High-performance compressor with proven reliability and high efficiency.
AFTER-COOLER type/PDS-C series
Compressor supplying air energy without water vapor
▪ After-cooler to eliminate water moisture from the compressed air.
▪ Suitable for sand-blasting and chipping.
▪ Pillarless design is adopted for easy accessibility to interior inspection and maintenance.
DRY AIR type/PDS-D series
Compressor supplying dry air
▪ Compact body with a built-in After-cooler, Auto-drain, After-Warmer, etc.
▪ Supply dry air in even rainy or high fumidity condition.
▪ Suitable for pipe cleaning, painting, and sand-blasting.
|
|
With a strong undercarriage and heavy gauge body, the XAS 185 JD7 Steel provides an especially robust and durable portable compressor. Just pull it to the worksite and start working.
Powered by a 4-cylinder John Deere engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.
|
|
QAX generators have been designed to meet the demands of rental fleets, construction applications and public utility companies and compliment our proven QAS generator range.
All machines are built to ISO 9001 quality assurance standards and meet current and pending legal safety and environmental requirements for the working environment. All Atlas Copco generators are tested to perform under the most demanding conditions.
|
|
|
|
|
|
-The XA(T,H)S 37-97 range of portable air compressors from Atlas Copco is an innovative range of single axle, oil-injected rotary screw compressors.
Powered by a 3-cylinder KUBOTA engine or a 2 or 3-cylinder DEUTZ engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.
- The XA(H,V,T)S 106-186 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.
- The XAS 356, XAHS 236 and XAMS 286 top the successful Atlas Copco range of 32 to 185 l/s (67 to 392 cfm) compressors. All models are single stage, oil-injected screw compressors with a free air delivery of 239, over 288 up to 345 l/s (507, 610 and 731 cfm) at 7, 8.6 and 12 bar(e) (102, 125 and 175 psig) respectively. They offer the highest capacity of any single axle trailed Atlas Copco compressor.
-XAS 746 / XAS 1600 CD6 is an oil-injected rotary screw compressor that delivers from 753 l/s (1600 cfm) at 7 bar (100 psig) to 645 l/s (1370 cfm) at 10.3 bar (150 psig). The machine is powered by a Caterpillar C13 diesel engine which fully complies with Tier-III/Stage-III exhaust emission standards
-OEM compressed air modules
Oil-injected rotary screw compressors
Capacity:
150 l/s - 590 l/s
9 m3/min - 35.4 m3/min
318 cfm - 1250 cfm
12 -30 bar(e)
175-435 psig
|
|
|
|
