|
|
The construction of the double-stage VMT-compressors is based on our proven, single-stage compressor series VM.37.
The VMT-series is designed for oil-free conveyance of air and neutral gases and has already been used since 1970 for the industrial generation of compressed air.
For the diverse industrial ranges of compressed air technology the double-stage units were steadily adapted to the changing operation requirements and modified. Experience of more than 200 supplies has developed a compressor unit, which can convert nearly all special applications of compressed-air technology according to the customers' individual requirements. The VMT-compressors cover motor ratings from 90 to 1020 kW and differential pressures up to 10 bar. This series is available in water-cooled as well as air-cooled design.
|
|
|
Ingersoll Rand contact-cooled, rotary screw compressors are proven,ruggedly reliable units that perform to the highest standardsregardless of industry, application, or environment. Easy to install andcontinuous-duty rated for long-term performance, with ourcompressors you get what you pay for, and more.
|
|
Heavy duty dry type air filter, effective oil filtration, step-less type control system, 3-stage centrifugal separation system, efficient cooling, user friendly diagnostics with solid-state MIMIC. Solid State MIMIC electronic annunciation pael gives fault indication for easy maintenance. Standard unit comes with reliable electro-mechanical controls.
|
|
SCREW COMPRESSOR APS 3 Basic Combi Dry (with dryer)
Recommended:
- Pre/Micronfilter
- Condensate cleaner ACR 1
Specs Screw block type Airpress csm
Intake capacity (l/min) 310
Receiver (l) 200
Switch Direct
Working pressure (bar) 8
Pressure (max., bar) 10
Sound level (dB(A)) 61
Dew point (ºC) +3
Coolant R 134a
Dimensions (l x w x h, cm) 142 x 57.5 x 125.5
Weight (kg) 187
Electric tension (Volt/Hz/Ph) 230/50/1
Fuse (A, slow) 20
Dryer (Volt/Hz/Ph) 230/50/1
|
|
Features:
Controls
*Uses only reputed and reliable control
*Simple system with minimum number of spare parts
Mimic Panel
*User friendly, compact, annunciation panel with display
*Constantly monitors status of compressor operation
Electronic Control Panel
*In-built safety trips as standard feature
*Isolated panel with swing out door for easy servicing
Aftercooler
*Comes as an integral part to ensure quality air
*Tropicalised design to withstand extreme temperatures.
Oil Seperation
*Highly efficient two-stage oil separation
*Spin-on element ensures less downtime to replace.
|
|
|
The Rotary Compressor Division is involved with the design, development and manufacture of electric and diesel powered screw air compressors.
|
|
|
|
|
|
PURGE type/SMS-S series
S series with great cost performance
▪ "Purge unloader + Auto-start/stop device" are equipped for saving energy.
▪ Applicable to some function such as alternate operation and remote control.
▪ Extended maintenance cycle to reduce operating expense.
E·CON type/SMS-U series
AIRMAN ORIGINAL ENERGY SAVING SYSTEM
Perform efficiently more than inverter
▪ AIRMAN unloader system reduces on power consumed at unload operation to about 20%.
▪ ACCS (AIRMAN Computer Control System) is to reduce full load power by about 5%.
▪ Applicable to some function such as alternate operation and remote control.
INVERTER CONTROL type/SMS-V series
Original inverter control to save energy efficiently
▪ Maximized use of motor output, service air volume is increased by using pressure.
▪ Corresponding with change of air volume used without loss to save energy.
▪ Constant control of pressure enables to operate at the lowest required pressure and not to waste it.
OIL FREE type/SMAD series
Compressor supplying clean air excluding oil
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
Simple & Compact - ROTORCOMP Encapsulated Units - NK Range
ROTORCOMP's oil injected NK-Range, designed for a power range from 2-45 kW (3-60 hp) has taken the compressor market by storm. Customers value the reliability, compact design and easy handling of this product range. NK-Modules incorporate seven components in a single housing: air filter, intake valve, air end, oil receiver, separator system and thermostat.
|
|
GEAR series
The new power packs for extensive compressed air requirementsPower class: 30 – 500 kW The gear-driven plants of the GEAR series enable ALMIG to offer a new generation of screw compressors for extensive air requirements. Delivery quantities of between 3.58 and 71.15 m³/min at max. operating pressures of 8, 10 and 13 bars.
With drive outputs of 30-500 kW the plants are available in an air-cooled (30-250 kW) and a water-cooled version (30-500 kW).
The easy-to-maintain and service drive concept with a robust drive motor with generous power reserves, easy-to-maintain and service gear and novel flexible gear drives with replaceable working elements protect the drive, work with minimum slip but with high operational reliabilityand virtually without loss (efficiency >98%). Highly efficient separation of the cooling agent facilitates a residual oil content of only 2–3 mg/m3.
|
|
|
|
|
|
PURGE type/SAS-S series
S series with great cost performance
▪ "Purge unloader + Auto-start/stop device" are equipped for saving energy.
▪ Applicable to some function such as alternate operation and remote control.
▪ Extended maintenance cycle to reduce operating expense.
E·CON type/SAS-U series
AIRMAN ORIGINAL ENERGY SAVING SYSTEM
Perform efficiently more than inverter
▪ Airman unloader system reduces on power consumed at unload operation to about 20%.
▪ ACCS (Airman Computer Control System) is to reduce full load power by about 5%.
▪ Applicable to some function such as alternate operation and remote control.
INVERTER CONTROL type/SAS-V series
Original inverter control to save energy efficiently
▪ Maximized use of motor output, service air volume is increased by using pressure.
▪ Corresponding with change of air volume used without loss to save energy.
▪ Constant control of pressure enables to operate at the lowest required pressure and not to waste it.
OIL FREE type/SAD·SWDseries
Compressor supplying clean air excluding oil.
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
|
|
|
|
Rotary lubricated screw compressor, direct drive
Models available: 30kW to 45kW
Capacity range: 282m3/h to 462m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard Equipment: 400 Volts three-phase, IP55 motors and wye-delta starting
Electronic controller. Air-cooled, Carrier fan. Sullube long-life and anti-glazing lubrication. Modular panels. CE certified.
Control / Regulation:
Microvisor 1.500 controller as standard and Microvisor 2.000 as option.
Inlet modulation as standard on fixed-speed models.
Variable speed drive range from 30 to 45kW.
Integral inter-machine communication and sequencing via RS485.
Easy integration into a sequencing network.
Applications: Suitable for all users who search both performances and value for money. Reliability, performance and manufacturer warranties make it the ideal product for installations where compressed air is strategic. Its small footprint, its low noise level et its ability to operate up to 50°C ambient, allow an easy integration in any environment.
Warranties :
5-year* warranty on the other major components
*special contractual warranty, available from Sullair distributors participating in the program.
|
|
Technology:
Rotary lubricated screw compressors, belt drive.
Models available: 2.2kW to 75kW
Capacity range: 17m3/h to 780m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard equipment: 400 Volts three-phase, IP55 motors and wye-delta starting from 7.5 kW. 2.2, 4 and 5.5 kW models fitted on 270-litre tank. Sullube long life and anti-glazing lubricant. Removable panels. EC certified. Single belt drive.
Key points:
Sturdy chassis and design providing the means for operation in any sort of environment, even the most difficult ones. Fast, easy maintenance at low cost.
Very low oil content in the air supplied. Immediate use and flexibility of use. Small footprint on the floor.
Control / Regulation:
Microvisor 2 and Microvisor 2V electronic controller.
Load/unload operation with no-load and min. pressure valve.
Optional inlet modulation of the flow rate on aspiration. TREK-V variable-speed range, including On/Off control of 2 compressors.
Easy integration into a sequencing network.
|
|
|
|
|
|
Technology: Rotary lubricated screw compressor, direct drive.
Models: 55kW to 160kW
Capacity range: 444m3/h to 1,620m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard equipment: 400 Volts three-phase, IP55 motors and wye-delta starting.
EFF1 90 to 160 kW motors. Flying Bird 4 fans for power and noise reduction.
Sullube long-life and anti-glazing lubrication. Modular panels. EC certified.
Key points: Ecological as designed to reduce the impact on the planet. Ergonomic for fast, easy maintenance at low cost.
Economic operating cost. Renowned, powerful and reliable air end.
Oil content in the air supplied the lowest on the market.
Flexibility of use. Sullair Variable Capacity System.
Control / Regulation:
Microvisor 3 and Microvisor 3V electronic controller.
Inlet modulation as standard on the whole range.
Sullair Variable Capacity System as standard on 132 and 160 kW, optional on 90 and 110 kW. AIR ONE-V variable-speed range, from 55 to 110 kW.
Integral inter-machine communication and sequencing via RS485.
Easy integration into a sequencing network.
Applications:
Suitable for all users who want to obtain a return on investment. Reliability, performance and manufacturer warranties make it the ideal product for installations where compressed air is strategic.Suitable for all spheres of operations, in particular thanks to the complete offer of control systems it provides, unique on the market.
Warrantees:
10-year** warranty on the Air end!
5-year* warranty on the other major components.
* special contractual warranty, available from Sullair distributors participating in the programme.
** on fixed-speed models only.
|
|
INNOVATION
The new Genesis is a unique all encompassing compressed air station replacing the many individual components that comprise a traditional system, saving you valuable space. The new Genesis includes everything you need to provide a reliable source of high quality, dry, clean compressed air to your system in one
convenient unit.
LOWER NOISE LEVELS
With operating noise levels between 62db(A) and 69 dB(A) the Genesis compressor can be located directly into the working environment and nearer the point of use, creating a more comfortable workplace and reducing installation costs.
|
|
Arange of rotative screw compressors designed to give real solutions
to the compressed air end-user, thanks to its utilization simplicity, quietness,
its extreme user-friendly maintenance, compactness and reliability.
|
|
The FORMULA range in line with its name, has been designed to allow a choice of complete configurations.
The Formula series is available in a wide capacity range from 5,5 to 55 kW.
|
|
| ... products without technical information |
| |
The R Booster Compressor is an electric powered reciprocating booster compressor.
The R55 Booster Compressor delivers 20.3 cu. Meters (700 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
The R110 Booster Compressor delivers 40.6 cu. Meters (1400 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
|
|
|
|
|
|
Continuous Air Systems' new line of high pressure boosters offers the latest in technology and cost efficiency.
All four models - 375B, 705B, 1125B and 1500B have revolutionized mining efficiency. They can increase penetration of in-hole drilling by 100% or more, and are capable of boosting present mine air pressure up to 350 P.S.I.G., for straighter drill holes, maximum bit life and faster drilling.
Continuous Air Systems boosters offer the latest computer controlled instrumentation, with easy to read gauges and lights for diagnosis of mechanical shut down problems. The 1125B and 1500B feature manual bypass switches which allow operation of any selection of compressors on the unit. This permits continued operation at reduced capacity if any compressors are shut down for maintenance. All boosters are designed to meet your high productivity requirements and come with a two year compressor warranty.
All CAS air boosters have gone through extensive on-site testing. Any necessary modifications were made when the "B" Series of CAS air boosters was released. Recently, Continuous Air Systems amalgamated all divisions of its company into one location, so that everything from production and design to inventory and sales is under one roof.
|
|
Compressors for refrigerators, freezers and light commercial applications such as bottle coolers and display counters are available for use with refrigerant R134a, R404A, R407c, R600a and R290, for 115V 60Hz and 230V 50HZ/60Hz.
|
|
Compressors for refrigerators, freezers and light commercial applications such as bottle coolers and display counters are available for use with refrigerant R134a, R404A, R407c, R600a and R290, for 115V 60Hz and 230V 50HZ/60Hz.
|
|
|
Speerall refrigeration scroll compressors are dedicated for low and medium temperature commercial refrigeration applications with refrigerants R404A & R507A. The compressors have rotolock connections and are available as single compressors. The Speerall compressors are suitable for parallel mounting (racks).
|
|
A. O. Smith is North America's leading independent supplier of hermetic motors for air conditioning and commercial refrigeration compressors. Quality A.O. Smith hermetic motors are used by many of the world's leading manufacturers of residential central air conditioners, commercial air conditioning equipment, commercial chillers, and heat pumps, as well as makers of walk-in coolers and refrigerated display cases.
From 5.5 inches to more than 15 inches in diameter and ranging in output from 1/2 to 500 horsepower, these precision rotor and stator units are engineered to withstand extremes in temperature, caustic and corrosive refrigerants and solvents, and deliver years of reliable service.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
