|
|
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors, joined with hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control valve for single acting cylinder, pressure gauge remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor cabinet with shut-off valves, hose extentions and other accessories available on request.
|
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump make up one jack SET with two or four machine jacks. |
|
The NV150 air-springs are the pneumatic isolators for the cplusw damping tables and are inserted into their base frame.
But as an OEM-product the NV150 can be used in many ways. Because of an upper stopper of the piston the design offers a maximum safety against an accidentally compression overload.
A permanent supply of compressed air is necessary for operation as well as a compression or rather a height controller for setting up the working height in between the levelling range of +/- 4mm The resonance frequency is about 1,7 Hz in horizontal directions and in vertical direction under 2,5 Hz.
CplusW offers support for system integration into customer products or special applications. Sets composed of three, four or even more NV150 air-springs will be delivered with the necessary number of height controllers HR2.
NV150 systems do not need any special maintanance after the initial setup. |
|
NV 50 is an isolator for integration into platforms with attachment options on one side wall or at the bottom. The is fixed with the centrical load rod. In consequence of the prismatic basic shape these isolators can be integrated in substructures of vibration-sensitive instruments and are ideal to use as OEM-elements.
If an installation in the inside of the instrument is not possible the dampers can be masked with an optional available blind made of polished stainless steel. The NV 50 hold brilliant isolation features in the lower frequency range despite the low contruction volume of about one liter.
The resonance frequency lies horizontal under 2 Hz and vertical at 2 Hz. The levelling range is +/- 3mm and can be set up with the height controllers HR2. A permanent supply of compressed-air is necessary. |
|
| LPP peristaltic hose pump is a new innovation in the world of peristaltic pumps. It is capable of handling the heaviest, most abrasive and aggressive slurries in mining and process industries as well as high viscosity fluids in hygienic and foodstuff applications. The completely new operating principle and the advanced adjustment mechanism give LPP extremely long hose life. The clever operating principle also allows LPP to operate continuously at high speeds and flows without overheating. The unique hose fixing system with reliable flanges at both ends of the hose enables secure and fast replacement of the hose. LPP can be easily installed in-line, because of its smart construction. The high flow capacity LPP makes a smaller pump size possible and the pump requires less space compared to the conventional peristaltic pumps. LPP saves energy and produces economic value in production and cost efficiency by reducing maintenance and upkeep costs. Currently LPP pump family consists of three sizes DN 25, DN 40 and DN 65 for working pressure max. 10 bar with flow capacities up to 20 m³/h. LPP can also be equipped with a sophisticated control unit. Taylor made solutions are available outside the standard product range. |
|
Larox Peristaltic Pumps for Dosing
The innovative Larox Peristaltic Pumps for Dosing (LPP-D) set a new industry standard for peristaltic pump technology. Designed and manufactured for the industrial marketplace, they are ideal for pumping diverse slurries and dosing a wide range of media. |
|
| The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar). |
|
| Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available. |
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and
servicing hydraulic systems up to 420 bar, 6000 psi. The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination. |
|
The RFIK mechanical hydraulic tester provides the ideal solution for servicing and commissioning
hydraulic circuits on agricultural and other mobile machinery.
The kit comprises of a direct acting flow indicator with built in thermometer, a loading valve and a pressure gauge all built into a strong steel case with a removable lid.
The unit is self contained and requires no electrical power. The dials are clear and easy to read.
Installation is extremely simple and the test kit can be connected into either the pressure or return lines. The loading valve and pressure gauge allow a progressive build up of system pressure in complete safety.
The test kit provides the service engineer with quick, accurate and simple performance testing of pumps, motors, valves, cylinders and complete hydraulic
circuits.
Note: This unit is not designed for permanent installation. |
|
Ultra-high-pressure hydraulic hose assemblies with crimped on fittings and couplings/nipples and operating pressures starting at 10,150 PSI (700 bar).
CEJN ultra-high-pressure hose assemblies feature high-pressure, spiral-reinforced polymer hose styles, constructed of multiple layers of spiral steel reinforcement with thermoplastic covers and tubes. Hose can be cut to any length and combined with multiple end connection possibilities.
One hundred percent of all hose assemblies are individually proof tested to 1.5 times their rated maximum operating pressure.
CEJN hose assembly capabilities, available throughput the world, enable customers to:
· Receive quick turnaround and nearby after-sales support
· Save production time and money, since assemblies are ready for immediate use without further assembly or testing and are more economical then buying individual components
· Purchase both hose and couplings from the same supplier, ensuring compatible components that are safety and performance tested
With CEJN’s extensive inventory of bulk hose and end connections, many hose assembly styles can be made and shipped the same day orders are received.
|
|
"Level switch NS OM
The level switch NS OM-64ej-KS series has been designed for systems that require visual and electrical control of the liquid level. The magnet is placed in the visual indicator to avoid a magnet field close to the liquid hence the unit is perfectly suitable for the control of coolants contanimated with ferrous chips.
The new Bühler “easyjust” system simplifies the adjustment of level contacts. The system consists of level contact cardridges that clip onto a gold plated contact board. This board can accomodate up to four contact cartridges without wiring. Also the function of the contacts (normally closed or normally open) is to changeable easy.
The interface with the tank top is by a flange according to DIN 24557 part 2.
applicatively for cooling lubricant
visual and electrical monitoring
adjustable level contacts
bistable level contacts = only one float
high float sensitivity
international standard flange dimensions
easy installation
maintenance free" |
|
Bühler Sample Gas Filter
Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer.
The AGF-PV-30 with the Bühler Unique QC bracket provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.
The QC bracket rotates 180° making the mounting of the bracket of the filter independent from the flow direction chosen. This versatile mounting feature makes installation problem-free.
The filter head features an auxiliary port that can be used either for a bypass or for installation of a moisture detector.
A variety of filter media is available to meet any specific application requirement.
Bühler Unique - QC bracket
Easy change of filter element without use of tools
Low dead volume for fast response
Versatile mounting bracket
Condensate drain option
Filter-head with additional port for bypass or moisture detector |
|
Bühler Heated Sample Gas Filter AHF - 22
The traditional design of heated particulate filters requires considerable maintenance and down time due to the work required to change the filter media.
Buhler’s AHF-22 incorporates a new advanced design that eliminates much of this work and sets new standards for ease and speed of maintenance. A spent filter can be changed in seconds and does not require dismantling the unit. Simply turn the handle 90 ° and the filter element slides out for replacement.
Depending on the application, the filter can be heated by self-regulating or controller-regulated cartridges.
Filter media are available in sintered stainless steel, ceramic or pleated stainless steel.
Robust and reliable design
Easy installation
Change filter element without tools or disassembly
Regulated or self-regulating heating
Optional calibration gas port
No cold spots |
|
Beyond Roots Blowers
Higher efficiency(45% over roots blowers) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller.
|
|
Beyond Roots Blowers
Higher efficiency(45% over roots blowers) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller.
|
|
... see all the products in the category
Blowers
|
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE. |
|
The innovative hydraulic pipe measuring points serv-Clip® for the PROFESIONAL MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
Forged valves with direct passage
- DNN (Nominal Diameter): 10-50
- PN (Pressure rating): 130-420
Execution: Class 800 to 2500
Technology: Forged
Principle: Oblique seats
Markets:
- Chemistry
- Engineering
- Maintenance
- Oil/gas
Connections:
- Has flanges
- To weld
- Tapped
Types of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO |
|
... see all the products in the category
| |