|
|
With the new RS-COMPACT range from 3 kW (400 l/min) even customers with low air demand can now enjoy the benefits of this compressor principle, i.e. continuous operation at max. pressure.
Here again the compressors are mounted on horizontal air receivers of different sizes.
For the COMPACT range virtually the same components as for the standard range are used with the only difference of a flat design which makes the range attractive, also from the price point of view.
|
|
| SCREW COMPRESSOR SILU GHH CG600 DP BELT DRIVE: OWING TO THE OIL-FREE COMPRESSION OF ATMOSPHERIC AIR THESE COMPRESSORS ARE SUITED TO BE MOUNTED ONTO TANK VEHICLES FOR THE PNEUMATIC HANDLING OF BULK MATERIAL, SUCH AS FLOUR, SUGAR, SALT, FORAGE, DRY GRANULATES, SODA, CEMENT, SAND LIME, GYPSUM, ETC. COMPLETE KIT WITH ORIGINAL GHH-RAND ACCESSOIRES, READY FOR MOUNTING ON YOUR TRUCK. ON DEMAND INSTALLATION OF THE KIT AND THE ORIGINAL ZF PTO INCLUDED. |
|
The ECO TEC system offers a reliable and non-expensive solution to the user who is in need of oil and condensate free air.
Generally speaking the ECO-TEC system is incorporated in the compressor plant.
In a physical/chemical process, the entire oil contained in the compressed air and the remaining hydro-carbon are cracked in several steps and oxidized by the addition of oxygen from the air.
The ECO-TEC system can be supplied for lubricated compressors already installed and is also available as stand-alone unit.
|
|
Within the compressor body there are two screws with matting profile: a female and a male screw, female having concave inlets and the male with convex helical inlets. The screws rotate in opposite directions with the female screw receiving the driving power and transmitting this power to the male screw through a set of synchronization gears.
As the screws rotate, the air is drawn into the inlet port and fills up the space between the screws. This phase is the Admission. The key phase is the Compression. It starts when the end of a male thread blocks the end of a female thread. The volume available between the compressor body and these two threads then progressively decreased during rotation. When this volume merges into the delivery outlet of the compressor, the third phase takes place, hence the Exhaust.
Throughout this process, there is no contact between the screws. This means no wear, total reliability, and non-pulsating air delivery. These compressor/blowers can be used in either a Mobil or stationary application and can be driven by a PTO, electric motor, or hydraulic power system. A complete range of dedicated ancillary product is available to support this product line.
|
|
We are manufacturers of screw compressors from 3 to 90 kW. Output 14,5 m3/min
(512 cfm) and pressures up to 15 bar (215 psig).
Our compressors are robust with simple and low-cost maintenance features.
With their energy saving asymmetric profile they are designed and proved for rigorous industrial use.
|
|
With reference to rising energy costs RENNER frequency controlled compressors have proven to be the right choice. Particularly in those cases where the air consumption fluctuates but also for peak-load machines this system is the ideal solution to safe energy.
The output of the compressor is adapted to suit the actual air demand using the infinitely variable electronic speed control.
|
|
We are specialized on manufacturing and marketing of screw compressors up to a capacity of 14,5 m3/min (512 cfm) and pressures up to 15 bar (215 psig).
Smaller machines can be mounted on horizontal air-receivers – ready to operate.
A wide range of accessories is also available, e.g. refrigeration and adsorption dryers, filters, air-vessels and others.
|
|
| The Hiscrew and DSP Screw Compressor are two types of Hitachi Screw Compressors available. Hiscrew compressors (oil-flooded type) range from 7.5kW to 240kW. Hitachi DSP Screw Compressors (oil-free type) are designed for higher energy efficiency, great convenience and easy operation, and range from 22kW to 120kW. Enjoy greater flexibility as Hitachi provides air-cooled and water-cooled models for both compressors. |
|
C 4 to C 9 (super-silenced screw compressor)
CD 4 to CD 9 (with integrated refrigeration dryer requiring no additional floor space)
CF 9 (7.5 kW, with integrated frequency control for optimized enery performance)
CDF 9 (7.5 kW, with integrated refrigeration dryer and frequency control)
Max. pressure: 8, 10, 13 bar
Free air delivery: 0.270 to 1.154 m³/min
Drive: belt-driven (patented GM drive system for optimal belt tension everytime)
High: only 960 or 1.240 mm |
|
The compressor delivers pulsation free air. By continuously matching the speed of the drive motor to the air net pressure, the compressor optimises energy consumption and reduces the operating pressure bands.
The range is available as aircooled or watercooled. A Full Feature version is also available where a refrigerant dryer is installed, integrated in the bodywork. A dryer bypass is installed as standard on the Full Feature machines. Some series have an integrated VSD dryer as well.
|
|
Atlas Copco GA range of oil-injected screw compressor is intelligently packaged, incorporating all vital air compressor installation accessories and options into one compact enclosure.
Evaluate the GA range: it is designed to meet your selection criteria. |
|
Atlas Copco GA range of oil-injected screw compressor is intelligently packaged, incorporating all vital air compressor installation accessories and options into one compact enclosure.
Evaluate the GA range: it is designed to meet your selection criteria. |
|
This next generation of oil-free screw compressors combine a wider pressure range and a higher flow rate with a lower specific energy requirement.
Minimal external piping, a very low vibration level and high mechanical integrity ensure a trouble-free future. |
|
A smooth production process, a quality end product, the lowest operating and maintenance costs and ensuring a healthy environment . These are the inherent qualities of oil-free air compression. Evaluate the products and make the right selection: the ZR/ZT range.
|
|
A smooth production process, a quality end product, the lowest operating and maintenance costs and ensuring a healthy environment . These are the inherent qualities of oil-free air compression. Evaluate the products and make the right selection: the ZR/ZT range.
|
|
SO range
DIN & VDE switch cabinet, with clear simple layout, to IP 55 index of protection: reliable and fully protected for the rigours of industrial use
Internal layout clearly defined into three sections: easy access to all components
BOGE´s intelligent ARS control and monitoring system: reliable, energy saving, fully compatible with building management systems
Heat of compression dryer fittings optional: energy free compressed air drying -40°C
Water cooled copper bundle intercooler and aftercooler: maintenance friendly for easy cleaning
High efficiency, class F, IP 55 motor with PTC resistor protection: package design allows motor ti work reliable within power reserves support by siting in coolest intake end of system
Service friendly separately flanged airend stages: easily demounted for bearing inspection and renewal; Replaceable stage bearings (no need to stock spare stages)
|
|
QAX generators have been designed to meet the demands of rental fleets, construction applications and public utility companies and compliment our proven QAS generator range.
All machines are built to ISO 9001 quality assurance standards and meet current and pending legal safety and environmental requirements for the working environment. All Atlas Copco generators are tested to perform under the most demanding conditions.
|
|
-The XA(T,H)S 37-97 range of portable air compressors from Atlas Copco is an innovative range of single axle, oil-injected rotary screw compressors.
Powered by a 3-cylinder KUBOTA engine or a 2 or 3-cylinder DEUTZ engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.
- The XA(H,V,T)S 106-186 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.
- The XAS 356, XAHS 236 and XAMS 286 top the successful Atlas Copco range of 32 to 185 l/s (67 to 392 cfm) compressors. All models are single stage, oil-injected screw compressors with a free air delivery of 239, over 288 up to 345 l/s (507, 610 and 731 cfm) at 7, 8.6 and 12 bar(e) (102, 125 and 175 psig) respectively. They offer the highest capacity of any single axle trailed Atlas Copco compressor.
-XAS 746 / XAS 1600 CD6 is an oil-injected rotary screw compressor that delivers from 753 l/s (1600 cfm) at 7 bar (100 psig) to 645 l/s (1370 cfm) at 10.3 bar (150 psig). The machine is powered by a Caterpillar C13 diesel engine which fully complies with Tier-III/Stage-III exhaust emission standards
-OEM compressed air modules
Oil-injected rotary screw compressors
Capacity:
150 l/s - 590 l/s
9 m3/min - 35.4 m3/min
318 cfm - 1250 cfm
12 -30 bar(e)
175-435 psig
|
|
XA(T,H)S 37-97 HardHat
Oil-injected rotary screw compressors
Around the world, construction and demolition site personnel wear a hard hat for protection. Now another important member of the team comes with its own safety kit, the latest HardHatTM compressor range from Atlas Copco.
Protected by an impact resistant canopy, the nine single-axle HardHatTM models combine great looks and class leading performance with the best damage and corrosion resistance in the business.
It is not just protection that is on offer. The one-piece HardHatTM canopy lifts to provide unrivalled service access, a key to reducing costs and minimizing downtime. Maximum protection, great looks and easy service access. Typical forward thinking from Atlas Copco.
|
|
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
S compact range
Clear layout in three sections: easy access to all components
Acoustic atenuator in the air inlet fitted as standard: very pleasant sound pressure level as standard with simple upgrade options to ultra silenced or cooling air exhaust ducting
Nylon laminated, sound insulated fibre mat lining: reduces sound pressure values. Dirt repellent and washable
Modular design using the standard component assembly system
Switch cabinet to DIN and VDE; IP 55 enclosure protection: clearly laid out and protected against dirt
State-of-the-art screw profile: small specific power requirement, excellent economy
High efficiency, class F,
IP 55 motor with PTC-resistor protection: long reliable service life enhanced by design location in cool area of package
ARS control and monitoring system: customised, convenient, economical, reliable
Patented GM belt drive system with constant belt tension: virtually maintenance free belt drive system
Horizontal oil reservoir and pre-separation vessel, removes more than 99% of oil, minimizes oil foam effect with zero pressure drop: ensures consistent residual oilcontent of only 1-3 mg/m³ in every operating phase
Valveless oil circulation system with no oil stop valve or check valve: high operational reliability
Vibration damping between compressor and base frame: no transmission of structure borne sound
Torsionally rigid, base frame for problem free transport fork-lift truck or pallet truck: easy positioning |
|
The Cloupressor: BOGE SLF
A frequency controlled screw compressor. By changing the speed of both motor and air end the SLF can operate the air end in its specifically optimum range and adapt the compressed air output to the actual needs. Expensive idling times and motor switches are avoided. At the same time a smaller pressure band can be set, also helping to save enrgy.
Special benefit: By adjusting the air end speed by frequency regulation not only the FAD can be adjusted but also the pressure value! Usual frequency controlled screw compressors only change the FAD at a certain given maximum pressure. Lowering the pressure value did not result in a higher FAD. But with the SLF adjusting the pressure value will at the same time result in an adjustment of the maximum possible FAD! This way a 13 bar model easily can be switched to an 8 bar model including the higher volume flow of an 8 bar machine. There are no alterings or constructive changes necessary. All pressure values can be served with one machine.
New models up to 160 kW / 220 PS!
SLF 30 - SLF 221
Direct coupled & oil injection cooled.
Effective FAD: 1,06 - 28,21 m³/min
Pressure range: 8 - 13 bar
Drive rating: 22 - 160 kW
|
|
The SF series wotks strictly in accordance with the compressed air demand. It produces the exact amount of compressed air requirement in the most economical way.
Frequency control minimize idling time and evens out air demand fluctuations.
|
|
| Toromont Energy Systems is a recognized leader in the use of screw compressors. In addition to our customized compression units, we have developed an extensive line of stock packages, operating over a wide range of conditions. Our applications are currently in use both on-shore and off-shore, in both sweet and sour applications. An installation list is available to qualified users upon request. |
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available.
|
|
The compressor delivers pulsation free air. By continuously matching the speed of the drive motor to the air net pressure, the compressor optimises energy consumption and reduces the operating pressure bands.
The range is available as aircooled or watercooled. A Full Feature version is also available where a refrigerant dryer is installed, integrated in the bodywork. A dryer bypass is installed as standard on the Full Feature machines. Some series have an integrated VSD dryer as well.
|
|
The high energy saving VSD – Variable Speed Drive – variants for quality air at the lowest cost.
Impressive energy savings slash up to 25% from your life cycle cost, ensuring early return on your investment. |
|
The high energy saving VSD – Variable Speed Drive – variants for quality air at the lowest cost.
Impressive energy savings slash up to 25% from your life cycle cost, ensuring early return on your investment. |
|
| The Hiscrew and DSP Screw Compressor are two types of Hitachi Screw Compressors available. Hiscrew compressors (oil-flooded type) range from 7.5kW to 240kW. Hitachi DSP Screw Compressors (oil-free type) are designed for higher energy efficiency, great convenience and easy operation, and range from 22kW to 120kW. Enjoy greater flexibility as Hitachi provides air-cooled and water-cooled models for both compressors. |
|
|
|
