|
|
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
Compressor, Bare Screw TDSH
Frick Refrigeration offers the largest range of screw compressors in the world. With 38 models ranging from 71 CFM to 5067 CFM, a screw compressor is available for almost every gas/refrigerant application. Frick sets the standard for compressor quality. |
|
Champion RotorChamp
125, 150, 200 hp
Product Styles- RCS125, RCS150, RCS200
Performance Overview
Direct Drive Non-geared Airend
Increased bearing life (L-10 life in excess of 100,000 hours) due to large tapered roller bearings.RC-60-100.jpg
Intensive Injection
6-8% improved full load operating efficiency provided by patented intensive injection lubrication system.
Air Logic Solid State Electronic controller
Every option available in the industry is standard on the Air Logic controller. |
|
Aerzen Screw Compressors VR for process gas technology in modular system single- and multi-stage for dry compression of process gases. The Screw Compressor stage is available in 13 sizes with swept volume flows from 600 m³/h to 120.000 m³/h. Differential pressures between 7 and 12 bar are standard at single-stage compression. With multi-stage design discharge pressures of 25 bar and 40 bar max., but also vacuums lower Pe –0,9 bar are achieved.
The maximum (1350 mm) and the minimum rotor length (155 mm) give an impression of the entire breadth of the offer. For the adjustment to the different process gases, rotors made of steel or special steel and casing of nodular cast iron, steel- or special steel casting can be applied. |
|
| ... products without technical information |
| |
RITTER drum-type gas meters are universally applicable for measuring the volume of flowing gases and are particularly effective when measurements demand the highest precision.
The major advantage and the superiority of volumetric Gas Meters (like Drum-type Gas Meters) over other measurement principles, which determine gas volume using secondary measurable variables such as speed, heat capacity, hot-wire resistance or similar, is that the volume is directly measured. That means that the condition and the composition of the gas has no influence on the measurement accuracy. |
|
| for volume measurement of gases in various types of construction an sizes. Gas meter sizes from G 40 up to G 4000 for gas volume flow measurement from 0,65 m³/h - 6.500 m³/h. Measuring pressures up to 25 bar. Works tested or officially calibrated as per national and EU-directives. |
|
| Rotary piston gas meters have been manufactured since 1930 by Aerzener Maschinenfabrik, one of the largest and oldest manufacturers worldwide. The basis for the design of the gas meter series is from many years of experience and continual dialogue with the end users, as well as using the harmonized EU-standards which will apply to all installations within the European Market. They are manufactured in accordance wiht the Aerzen tradition for quality corresponding to the quality assurance system, certified to DIN ISO 9001 and as per pressure device guideline DGRL 97/23/EG. |
|
| ... products without technical information |
| |
Designed for low flowrates, AALBORG®'s Model P FLOW METER
is a precision instrument embodying the
simplicity, versatility and economy of the classical
Variable Area meter. It is particularly suitable
for metering carrier gases in chromatography,
indicating and controlling gases in manufacturing
processes, liquid and gas measurement in
laboratories, pilot plants, flow and level indicating, etc.
Shipped completely assembled, AALBORG®'s P METERS
include standard mounting fittings in a choice of
materials, side plates, thick protective magnifying
front shield and back plate, optional built-in control
valve, and flow tubes selected from the Flow
Capacities tables. Panel mounting style is convertible
to bench mounting through the use of the
optional acrylic tripod base. The tripod has a built-in
spirit leveler and leveling screws.
150 mm P METER is equipped with a CV™ Valve and the 65mm
P METER with an MFV™ Valve.
MATERIALS OF CONSTRUCTION
FLOW TUBES- Heavy-walled borosilicate glass.
FLOATS- Glass, Sapphire, 316 Stainless Steel,Carboloy and Tantalum.
STANDARD ACCURACY- ±2% FS (mm scales).±5% FS(direct readingscales).
CALIBRATED ACCURACY- ±1% FS
REPEATABILITY- ±0.25%.
USEFUL FLOW RANGE- 10:1 minimum with one float and better than 20:1 with combination of two floats installed. |
|
KOFLOC RK120XM
The KOFLOC Precision Variable Area Flow Meter for Gas Mixing MODEL RK120XM SERIES combines 2 to 4 RK1200 precision flow-tubes optimized for gas mixing applications.The KOFLOC RK1200 SERIES High Precision Variable Area Flow Meter is a high-grade rotameter especially suited for measurement and control of minute flow, with an industry reputation of being one of the best analog devices. The KOFLOC 2412 SERIES Non-Rotating Precision Needle valve allows precise and easy flow control of minute amounts of gases and liquids. The internal mechanism converts rotating movement into stable linear movements with minimal vibrations. The needle and orifice has a thermal compensating structure (US P.A.F.) of 0.3%/˚C (15˚C to 35˚C).
FEATURES
♦ Wide-range flow measurement
♦ Fine control of minute flow
♦ Precision needle valve
♦ Numerous variants and custom models
APPLICATIONS
♦ Gas mixing |
|
- Service: gases & liquids
- Wetted parts material:
Body- Acrylic Plastic
O-ring- NBR, Viton
Float- SS316, , Glass, POM Plastic
- Valve material: SS316
- Connecting material: SS316
- Connecting size: 1/8"NPT female
- Temperature & pressure limits:
150 pisg(10bar) @ 100ºF(38ºC)
- Temperature limit: -24ºC~+54ºC
- Accurary: 3% full scale
- Mounting: vertical position
- Weight: 0.12 kg |
|
Features:
- Operating pressures up to 200 psig and maximum temperatures of 121ºC
- Feature fused ceramic scales accurate to within ±2% of full scale
- Repeatability is 0.25%
- Uniformly tapered bores with internal rib guides to stabilize the float
- Floats of glass, stainless steel or carbaloy |
|
SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.
|
|
Applications: flow measurement of industrial gases, natural gas, compressed air, ventilation...
Ultrasonic probes can be put on a spoll or installed under pressure without any break in the process. 2 equipment are available.
MINISONIC G measurement can be single or dual chord. UF 322 G-MC allows 6 speed integrations for the best accuracy even in difficult conditions such as weak hydraulic conditions.
ATEX equipment |
|
TriPlus™ Autosampler
The new TriPlus Autosampler is the most flexible platform conceived for modern analytical labs.
Product Detail
Merging robotic technology for vials and syringe operation, with advanced controls of the three dimensional space movements of the syringe holder (XYZ), the new TriPlusTM Autosampler is providing larger flexibility in sample capacity for high lab productivity, while still delivering unprecedented lab automation.
Now available with Solid Phase Microextraction (SPME)* capability for further laboratory productivity by offering a one-step process for sample preparation without requiring hazardous solvent usage. SPME is a novel solvent-less sample preparation technique, involving extraction, concentration and introduction of analytes in a single step.
Automate two GC or GC/MS systems at once for ultimate productivity. The TriPlus Autosampler is also now compatible with other manufacturer GCs and data systems.
The ability to independently serve multiple GC platforms for higher productivity is just one of the unique values delivered by this new Thermo Scientific premier product.
All TriPlus movements are step-by-step controlled ensuring reliable operations for thousands of samples. The same controls permit automatic alignment procedures and self-recognition of all available accessories (solvent stations, bar code readers, incubation heated oven, vial tray holders and type) making for quick installation of the autosampler and easy start-up. |
|
Cylinder sampler for accurate samples of gas and two phase liquids.
Flow through design assures representative sample
Self-sealing quick disconnects for easy removal and transport of sample cylinder
Outage tubes or volume reduction vessels for prevention of over pressurization |
|
GOW-MAC provides complete solutions for bulk and specialty gas handling. From system design and safety monitoring to installation, training and instrument repair, you can be sure that your project will meet your performance goals, as well as comply with local, state, and federal regulations.
Design
Our engineers will design, construct and install the systems needed to provide you with the most effective solution to your gas handling requirements, including cylinder filling, mixing and the analytical capabilities that the specialty gas market demands.
Products include:
Specialty Gas Analytical Package Labs
· Rack or wall mount
· High and Ultra High Purity (Grade 6)
· Special Custom Designs
Specialty Gas Control Panels
· Gravimetric and Volumetric Ultra High Purity Gases
Cylinder Processing Systems
· Flammable and Oxidizer
Manifolds
· Filling, Delivery, Custom
Cylinder Dryers
·12 or 24 station
Cylinder Rollers
· 4, 6 or 8 cylinders
Custom High Purity Control Panels
· Electropolished
· Stainless steel
· Orbitally welded
· ...and much more |
|
| ... products without technical information |
| |
240-MS GC Ion Trap
Leading the way in GC/MS Analysis
The Varian 240-MS Ion Trap, together with the Varian 450-GC, delivers unparalleled capabilities for both research and routine applications with reliability you expect from an industry leader.
The Varian 240-MS Provides:
- Unsurpassed sensitivity (200 femtogram OFN)
- Less maintenance and high reliability to deliver maximum productivity
- Accurate identification and quantification of trace analytes
- A unique choice of configurations with internal and/or external ionization
- Intuitive software that makes operation simple
- Powerful MS/MS and CI options
|
|
GC and GC/MS Solutions
Unlock improved productivity and performance in your laboratory.
* GC Biodiesel Solutions Launched
* Offer extended! - GC/MS Promotional Offers
* DSQTM II single quad GC/MS
* Unmatched intelligent sequencing with ToxLabTM 2.0 software
* Workflow-Oriented Software - EnviroLabTM Forms 2.0 and ToxLab Forms 2.0 |
|
QMS 403 C Aëolos® - Quadrupole Mass Spectrometer
The QMS 403 Aëolos® quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis. This system has been optimized for coupling to differential scanning calorimeters, dilatometers and thermogravimetric analyzers.
The high temperature of the gas transfer system and the absence of pressure reduction orifices practically eliminate condensation of decomposition products during thermal analysis experiments. This achieves a high detection sensitivity and facilitates quantitative detection of all identified gas components.
Via the inlet system with the fused silica capillary, other gas sources can be investigated with the QMS 403 C Aëolos® independent of thermal analysis; for that purpose, the QMS is operated with the self-contained software.
The concept of the NETZSCH thermal analysis instruments has been laid out from the start for coupling with gas analysis systems like the QMS 403 C Aëolos® or an FTIR system with a gas cell, through consistent optimization of the gas paths with complete heating from the furnace to the gas detector. This eliminates gas loss through condensation at cold spots and only very low carrier gas flows are sufficient for complete transfer. |
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols) |
|
| TSI offers a full line of combustion gas analyzers, from our single gas monitors to our full-featured emissions analyzers. They are used for maintaining combustion systems, compliance monitoring, engine research and monitoring, combustion research and industrial emission sampling. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
