|
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available.
|
|
The compressor delivers pulsation free air. By continuously matching the speed of the drive motor to the air net pressure, the compressor optimises energy consumption and reduces the operating pressure bands.
The range is available as aircooled or watercooled. A Full Feature version is also available where a refrigerant dryer is installed, integrated in the bodywork. A dryer bypass is installed as standard on the Full Feature machines. Some series have an integrated VSD dryer as well.
|
|
The high energy saving VSD – Variable Speed Drive – variants for quality air at the lowest cost.
Impressive energy savings slash up to 25% from your life cycle cost, ensuring early return on your investment. |
|
The high energy saving VSD – Variable Speed Drive – variants for quality air at the lowest cost.
Impressive energy savings slash up to 25% from your life cycle cost, ensuring early return on your investment. |
|
Champion RotorChamp
20, 25, 30 hp
Product Styles- RCS20, RCS25, RCS30
Premium Efficiencyefc-champ.jpg
Precise rotor profile offers less slippage than competitor offerings to offer a wider band of operating efficiency relative to rotor speed.
Small Footprint
Offers the smallest footprint for its HP range in the industry to maximize your available floor space.
Easy Serviceability
25% fewer parts and superb engineering contribute to one of the most service friendly units available. |
|
| The Hiscrew and DSP Screw Compressor are two types of Hitachi Screw Compressors available. Hiscrew compressors (oil-flooded type) range from 7.5kW to 240kW. Hitachi DSP Screw Compressors (oil-free type) are designed for higher energy efficiency, great convenience and easy operation, and range from 22kW to 120kW. Enjoy greater flexibility as Hitachi provides air-cooled and water-cooled models for both compressors. |
|
| Versatile transpostables compressors for a great variety of applications: 2 to 25 45 Pressure and m3/min volumes from 7 to bar |
|
| Versatile transpostables compressors for a great variety of applications: 2 to 25 45 Pressure and m3/min volumes from 7 to bar |
|
Compressor, Bare Screw TDSH
Frick Refrigeration offers the largest range of screw compressors in the world. With 38 models ranging from 71 CFM to 5067 CFM, a screw compressor is available for almost every gas/refrigerant application. Frick sets the standard for compressor quality. |
|
- Atlas Copco screw compressors have always set the standard for reliability and performance in the compressed air industry.
- With the new GX 2-11, Atlas Copco brings the power and reliability of an industrial screw compressor to small and medium sized industry.
- Traditionally, light industry has had to settle for inefficient and noisy piston compressors. The GX 2-11 deliver Silent Power and Simple Reliability.
- The advanced sound dampening of these units insures Silent Power. The sound level of the complete package is only 61 to 68 dB(A)
- Total Reliability is insured as Atlas Copco screw compressors are suitable for 100 % continuous duty. Additionally, the number of components has been kept to a minimum so simplicity is designed in from the start. |
|
Aerzen Screw Compressors VR for process gas technology in modular system single- and multi-stage for dry compression of process gases. The Screw Compressor stage is available in 13 sizes with swept volume flows from 600 m³/h to 120.000 m³/h. Differential pressures between 7 and 12 bar are standard at single-stage compression. With multi-stage design discharge pressures of 25 bar and 40 bar max., but also vacuums lower Pe –0,9 bar are achieved.
The maximum (1350 mm) and the minimum rotor length (155 mm) give an impression of the entire breadth of the offer. For the adjustment to the different process gases, rotors made of steel or special steel and casing of nodular cast iron, steel- or special steel casting can be applied. |
|
| The DELTA TWIN series is designed for the oil-free compression of air and neutral gases and is applied especially in industrial compressed-air production. The double-stage units cover motor ratings from 75 to 200 kW and differential pressures up to 10 bar. |
|
- 15-50 kW (20-67hp)
- 7.5 and 8.6 bar(e) - 110 and 125 psig
- 37-125 l/s - 2.2-7.5 m3/min - 78-265 cfm
Oil-free... risk-free: When it comes to compressed air, oil-free air is no longer the privilege of exotic production processes. It is simply the preferred solution for many compressed air needs. Will there be oil-free air in your future? Evaluate the product characteristics with your selection, the ZR/ZT15-50 range.
- 100% Oil-free Air
- No condensate management problems
- Operator friendly and easy to service
- Consistent performance over the product's lifetime |
|
DS-13 Series Oil-Free Compressors
The natural thing to do. Using our expertise in fluid-injected screw technology, we took the next step in compression. We designed the DS Series to deliver the ultimate in compressed air quality: oil-free air. With non-contacting carbon ring seals that allow no lubricant to enter the compression chamber, our oil-free compressors provide critical quality oil-free air for sensitive applications such as:
* Food and beverage
* Pharmaceutical
* Chemical
* Textile
* Electronics |
|
| Atlas Copco is the leading manufacturer of portable compressed air machines in the world. Used in a wide variety of industries, Atlas Copco has developed a set of machines that successfully walk the line between size, output and capacity.Drilling is a high intensity business where every second counts, and there is no room for error or failure. The 25 Bar (365 psi) machines from Atlas Copco are the most durable and robust machines in their class, and as such they lead the industry. These machines are flexible and multi-purpose: from demanding large rotary blast holes, deep-hole drilling to large diameter pipeline cleaning. Adapted to working in difficult conditions and extreme temperatures, they are the natural choice for deep-hole drillers and the Oil & Gas industry. |
|
HPC KAESER Mobilair portable screw compressors are powerful, mobile machines for providing compressed air on the construction site or industry for applications such as road breakers, power moles and sand blasters. The wide range of Mobilair models and options covers every demand of the construction industry from power tools to auxiliary electrical supplies for lighting and welding.
The HPC Kaeser partnership brings a wealth of experience and expertise to the market with a range of portable compressors and accessories providing ideal solutions to the varied needs and demands of the U.K. portable compressor market. From the compact M12 with a capacity of 1.2m3/min (42cfm), that can be transported in the back of a small vehicle, to the high-performance M260 delivering 26m3/min (918cfm) at 7bar. |
|
You can’t lose. Our full line of portable rotary screw compressors, 125 to 1600 cfm, in standard, high pressure and utility models, are designed for total accessibility and reliability.
Bells and whistles. Large service doors can be padlocked, 0 to 100% capacity control, two-stage dry type air filters with safety element, curbside instrument panel, diagnostic shutdown indicator system, protective shutdown switches and AWF all-weather fluid. |
|
The construction of the double-stage VMT-compressors is based on our proven, single-stage compressor series VM.37.
The VMT-series is designed for oil-free conveyance of air and neutral gases and has already been used since 1970 for the industrial generation of compressed air.
For the diverse industrial ranges of compressed air technology the double-stage units were steadily adapted to the changing operation requirements and modified. Experience of more than 200 supplies has developed a compressor unit, which can convert nearly all special applications of compressed-air technology according to the customers' individual requirements. The VMT-compressors cover motor ratings from 90 to 1020 kW and differential pressures up to 10 bar. This series is available in water-cooled as well as air-cooled design. |
|
The industry-standard.
Our single-stage fluid-injected compressors are the ideal choice for virtually any application. Available in the most popular horsepower sizes, these compressors offer a wide range of features and options.
LS-25S Single-Stage Air Compressor
LS-25S (open)
* 250 to 350 hp
* Capacities from 1075 to 1615 acfm
* Pressures from 100 to 125 psig
* Air end life lengthened by Sullair’s superior bearing arrangement
* Choice of three long-life fluids and long-term warranties
* Choice of air- or water-cooled
Standard Features
* Direct coupled
* C-Flange
* Time-proven Sullair air end
* Supervisor™ controller
* Multi-stage separation (MSS)—High efficiency air/fluid separation with Optimizer™ separator
* Spin-on fiberglass fluid filter
* Optimalair™ heavy duty intake filter
* Wye delta starter
* Bearing Fluid Reservoirs (BFRs)
* Energy efficient motor |
|
The performances of a screw compressor for pistons users.
Power : 5,5 to 30 hp
Pressure : 8 to 13 bar
Air flow : 23 to 201 m³/h
Noise level : 71 to 79 dB(A)
|
|
The new electronic control module is of course applied in the Creemers RCH screwcompressor installations from 5.5 to 15 kW. The screwrotors are produced according to the latest production techniques. Vibration free operation and a high output guarantee top quality. These compressors are servicefriendly and make up reliable compressed air installations for industrial use.
Technical specifications screwcompressors 5, 5 - 15 kW
Screwcompressors 18,5 - 55 kW
The latest developments in screwcompressor design are incorporated in the Creemers RCN installations from 18.5 up to 55 kW. The screwrotors of the RCN 18.5, 22 and 30 models are fitted in an advanced cast iron housing, which also functions as an oil reservoir. RCN 37, 45 and 55 models are equipped with a separate oil reservoir. Furthermore, all types are optionally available with frequency invertors.
Technical specifications screwcompressors 18, 5 - 55 kW
|
|
LARGE SCREW COMPRESSORS
The DSD/ESD series is a unique range of screw compressors where during the design stage a number of innovative technical solutions were introduced involving the drive system, airend, cooling system and package sound-proofing. All models feature high quality, durable components that are logically laid out and contribute to the outstanding performance and reliability of these compressor packages. Component accessibility is optimised through wide opening doors, removable panels and a sensible design that greatly simplifies maintenance. The result is an extremely high quality compressor package.
The models in the GS-HS compressor series complete HPC's comprehensive range of screw compressors. As with all HPC Plusair compressors, these powerful belt driven units with free-air delivery capacity of up to 2797cfm are quieter than quiet, low in maintenance costs and are designed to operate at full load 24 hours a day 7 days a week. |
|
Aerzen VMX-screw compressors with oil injection are designed for intake flow volumes from 70 up to 3180 m³/h at driving speeds of 50 resp. 60 Hz and an overpressure - single-stage - up to 13 bar (higher pressures or admission pressure operation upon request).
The drive is effected via V-belt resp. toothed belt or directly via a flexible coupling from the driving motor to the male rotor of the air end. Drive by electric motors or internal combustion engines. All stages are suitable for frequency converter-operation (standard). |
|
Screw compressor-packages DELTA SCREW VM/VML
for dry compression of air and neutral gases. 19 sizes in 2 pressure stages with gearbox or belt drive. Intake volume flows from 200 - 15.000 m³/h.
Pressure operation up to max. pe = 3,5 bar.
Intake operation up to max. pe = -0,85 bar. |
|
We compressed our compressors.
All functional components are contained within a compact frame. These encapsulated compressors are suitable for air systems in a small plant, or any location where floor space is limited.
ES-6 Encapsulated Air Compressor
The Sullair ES-6 is a complete AirMetrix™ Performance Air System for small horsepower applications that includes a Sullair encapsulated compressor, SRS dryer, SCF filter, and 80 gallon or 120 gallon storage tank. Note: The compressor enclosure, dryer, filter, and receiver are optional.
* 5 to 10 hp
* Capacities from 13 to 36 acfm
* Pressures from 125 and 175 psig
* High efficiency performance—designed for continuous duty
* All functional components housed in an integrated unit
* Multi-drive versions available |
|
Two-stage extreme pressure compressors are designed for applications requiring pressures up to 350 psi. These models feature our reliable rotary screw air end and specially engineered compressor fluids.
LST-16 Two-Stage Extreme Pressure
Air Compressor
LST-20 (enclosed)
* 100 to 200 hp
* Capacities from 250 to 425 acfm
* Pressures from 250 to 350 psig
* Choice of air- or water-cooled |
|
Return on Investment
Two-year payback in energy savings on our two-stage tandem compressors when compared with a single-stage compressor. They are excellent whenever energy costs are a concern. They offer unmatched full load efficiency.
Sullair VSD Compressors with Smart Technology
Variable Speed Drive is the superior alternative to other compressor control systems. Variable Speed Drive provides the flexibility to vary both capacity and pressure. This flexibility makes it possible to “grow” your air system without adding another compressor. |
|
|
|