|
|
ARNOLD-POWERLOK screws correspond to Property
Class 10.9. By slight carburisation an
additional increase of surface hardness is possible.
® ARNOLDPOWERLOK screws are fastening and
locking elements in one. They can replace mechanical
and chemical lock retention methods.
• Easy fully automatic application is possible
because problems due to locking elements
getting caught are prevented.
• The locking effect is not reduced by temperature
or ageing (as is often the case with chemical
systems).
• Feeding problems caused by rubbed-off plastics
debris on vibratory conveyors cannot occur.
® ARNOLD-POWERLOK screws provide strong and
safe connections. They offer the correct solution
when oscillation and vibration are involved!
|
|
ARNOLD Fastener Express finds its basis in the thinking behind Rapid Prototyping. The Functional Prototyping service model adapted by ARNOLD makes it possible to reduce development and production times by up to 75 per cent – with no detrimental effect on quality. With Fastener Express ARNOLD is in a position to manufacture and supply customised complex fasteners within three weeks.
by minimising administration work
by feeding the incoming order straight to technical assessment
by simultaneously translating the three-dimensional CAD data into the product
machining replaces tool design and procurement
|
|
Huck-Spin® (Small dia.)
All the advantages of the large-diameter Huck-Spin packaged for 1/4",5/16", and 3/8" applications. Swaged-on, vibration-proof clamp. No pintail noise, waste, or exposed fracture surface. Swift, accurate installation and quick visual inspection. Available in steel, aluminum, and stainless steel, in a variety of head styles.
|
|
• Huck C50L
-8.8 grade large diameter Lockbolt
-Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance
-High tensile friction grip fastener
-Thread head variety available for rail track applications
-Pin head style – Round, truss, countersunk, thread head
-Collar style - Standard, flanged, low profile
-Materials - Steel, stainless steel, aluminium
-Diameters – 12.7, 15.9, 19.1, 22.2, 25.4, 28.6, 31.8, 34.9 mm
|
|
C120L®
8.8 grade two-piece lockbolt fastener
High tensile strength and vibration resistant
Standard 6 locking grooves offering wider grip range than most competitor fasteners
|
|
Huck BobTail®
The BobTail is the next step in lockbolt evolution.
1)No pin-tail or pin-break
❚ Reduced material wastage
❚ Low installation noise
❚ Increased corrosion resistance
2)Newly designed, compact, semi-automatic tooling
❚ Fastener installs in only 2 seconds, up to twice as fast
as any other large diameter LockBolt on the market
❚ Consistent, high quality installation - 25 years experience or a
novice makes no difference to the quality of the installation
❚ Smooth, shock free installation sequence – eliminates jolts to
the operators arms and hands
|
|
KFH
Studs for mounting into P.C. boards which can be used as solderable connectors as well as threaded fasteners. Thread sizes #4 to #10 and M3 to M5.
FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB, TPS
External threads in sheets as thin as .020" / 0.51 mm. Included are flush- mounted studs, studs for thin sheets, high-strength studs, BUSBAR® studs, studs for stainless steel, and non- threaded alignment pins.
FH4
For installation into stainless steel sheets as thin as .040"
FHL, FHLS
Installs closer to the edge of a sheet than standard studs without causing that edge to bulge. Flush-head for sheets thickness .040"/1mm and greater.
HFED
These self-clinching studs have an enlarged head diameter that provides high-strength in sheets as thin as .040"/1mm. Dog point allows for easy nut positioning and engagement.
|
|
Magna-Grip®
Grade 2 fastener that resists loosening. Widely known as the most reliable wide grip fastening system there is, the HUCK Magna-Grip fastener also provides vibration resistance and high uniform installed values.
|
|
| ... products without technical information |
| |
This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread.
This deformation results in a powerful locking on the sides of the screw thread and counteracts the unscrewing effects of dynamic stresses, vibrations and thermal loads. The locking torques obtained are comparable with the values indicated in standard ISO 2320.
The stainless steel self-locking thread insert is recognised by its red colour.
|
|
|
The Atlas® product line includes two basic types of threaded rivet nut products. The Atlas SpinTite® product line includes a variety of inserts which satisfy most applications where strong one side thread installation is required. Of course if a standard product does not fit your need, please contact us so that we can make other recommendations. We also offer cost effective and easy to use installation tooling for our complete line of fasteners.
|
|
AS, AC, LAS, LAC
Floating action compensates for mating hole misalignment. Available with locking or non-locking threads. Thread sizes #4 to 1/4" and M3 to M6.
LK, LKS, LKA
The PEMFLEX® design provides MIL-N-25027 locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5.
WN, WNS
Unique PEM design prevents burnouts and eliminates the need for indexing and retapping to remove weld spatter. Thread sizes #4 to 1/4" and M3 to M6.
|
|
Steel & Stainless Steel Clinching Nuts
EDM-S, EDM-SS, EDM-CLS, and EDM-CLSS
Aluminium Clinching Nuts
EDM-CLA
Clinching Nuts for Stainless Steel
EDM-SP
Lock Nuts
EDM-SL
Flush Nuts
EDM-F
Miniature Nuts
EDM-U, EDM-UL, EDM-FE, EDM-FEO, EDM-FEX, EDM-FEOX
|
|
KPS6 Used in plated thru-holes in multi-layer P.C. boards. The self-expanding shank ensures positive contact with plated thru-holes. Thread sizes #4 to #10 and M3 to M5.
SOAG, SOSG Used to ground P.C. boards to steel or aluminum chassis. Annular projecting teeth eliminate the need for serrated or starwashers to make good electrical contact with the circuit foil. Thread sizes #4, #6, and M3, M4.
KFE, KFSE
Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.
|
|
Through Threaded Standoff
EDM-SO,EDM-SON, EDM-SOA, EDM-SOS
Through Standoff for Thin Sheet
EDM-TSO,EDM-TSOS,EDM-TSOA
Standoff for Stainless Steel
EDM-SO4 THRU-HOLE THREADED STANDOFFS
Self Clinching Type Through Standoff
EDM-KFE, EDM-KFSE
Blind Standoff
EDM-BSO, EDM-BSON, EDM-BSOA, EDM-BSOS
Blind Standoff for Stainless Steel
EDM-BSO4 BLIND THREADED STANDOFFS
Grounding Standoff/Broaching Nut
EDM-SOSG AND EDM-SOAG
Locking Standoff
EDN-CSS, EDM-CSOS
Keylock Standoff
EDM-SKC
Blind Fasteners
EDM-B, EDM-BS
Quick Release Standoff
EDM-SSA, EDM-SSS, EDM-SSC
|
|
KFB3
For spacing or stacking P.C. boards. Special shank is flared to increase pushout resistance. Thread sizes #4, #6 and M3, M4.
KFE, KFSE
Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.
|
|
Ultrasonic/Heat Staking Threaded Inserts
EDM-IUTB, EDM-IUTC
Press In Threaded Inserts
EDM-NFPC, EDM-NFPA
Mouldes-In Threaded Inserts
EDM-IBB, EDM-IBC
|
|
|
|
|
|
Ultrasonic/Heat Staking Inserts
ISB, ISC
Symmetrical, thru-threaded inserts designed for use in straight or tapered holes. Symmetrical design eliminates the need for orientation. Thread sizes #2 to 1/4" and M3 to M6.
IUTB, IUTC
Straight wall, thru-threaded inserts designed for use in straight holes. Self-aligning lead-in provides for accurate alignment prior to installation. Thread sizes #2 to 3/8" and M2 to M6.
Molded-in Inserts
IBB, IBC
Blind threaded inserts. Blind-end protects the threads from plastic intrusion. Thread sizes #2 to 3/8" and M2.5 to M8.
IBLC
Self-locking blind threaded inserts. Deformed threads lock screw in place to resist vibration. Blind-end protects threads from plastic intrusion. Thread sizes #2 to 1/4" and M3 to M6.
Press-in Inserts
NFPA, NFPC
Hexagonal, press-fit insert provides strong, reusable threads. No heat or ultrasonics required. Hexagonal "barbed" configuration ensures high torque-out and pullout values. Thread sizes #2 to 5/16" and M3 to M8.
PKB
Straight knurl press-fit insert with strong, reusable threads. No heat or ultrasonics required. Straight knurling at the top end of the insert offers higher torsional resistance. Slotted insert compresses allowing easy access into the mounting hole. Thread sizes #2 to 1/4" and M3 to M6.
|
|
... see all the products in the category
Inserts
|
Container Hook VCH 20 with Safety Locking Device
Suitable for ISO container edges. With a patented safety locking mechanism. A clevis connection for the 22 mm VIP chain. Using a VRG - 16 connector, the chain diameter can be reduced and thus a 16mm VIP - chain can be used .
Attention: RUD-VCH 22-Hooks are not suitable for vertical lifting. Given a minimum inclination angle of 30° during the lifting process, the hook cannot automatically open.
Connecting bolt and tensioning sleeve are pre-assembled.
|
|
Matter, completion:
Steel phosphated with manganese. Button pressure: aluminium. Example of order: nlm 07780-2110x50
Foot-note: L´anneau of lifting to autobloquant bolt is equipped d´une mobile manille: It constitutes a tool for lifting fast and simple to handle. To press the button for déverouiller balls of the bolt and to slacken it to obtain a sure locking.
|
|
|
|
|
|
The essential link in any safety system
Connectors vary according to their shape, size and locking system. The size of the gate opening determines what they can be clipped to.
Aluminum carabiners are made of an alloy ensuring an excellent strength to weight ratio. Since they are lightweight and will not interfere with progression, they can be used on harnesses, at the end of a lanyard or to construct temporary anchors.
The heavier steel connectors are most often used in anchor systems. Quick links can be left in place for extended periods of time.
The Petzl difference
1- 2- Manual or automatic locking
Petzl offers two types of locking systems:
- manual, which requires the user to lock the gate closed,
- automatic, which automatically locks the gate closed.
The automatic locking system is recommended for carabiners that are used frequently.
The manual system is recommended for dirty environments (mud, ice).
3- Keylock System
All aluminum Petzl carabiners use the Keylock system. The body / gate interface does not have a hook that could snag on anchors, ropes, harnesses, etc.
4- Different shapes for different uses
Symmetrical, small or large pear-shaped or D-shaped, each form corresponds to a specific use: to connect a device to a harness, attach a pulley or to use at the end of a lanyard, etc.
|
|
|
Snap hook zycral car Conforms to the standard INTO 362.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
