|
|
|
Equipment for the spray and the projection of compact Material foam of ergonomic proportioning Gun of cleaning for hot water Accessories of washing and rinsing
|
|
E5 - Compact, Low-Profile, Carpet Extractor
Achieve superior cleaning results in hard-to-reach areas without compromising productivity.
Superior carpet cleaning results from unparalleled deep cleaning technology.
Improve productivity and cleaning results in congested and hard-to-reach areas with low-profile, compact design.
Reduce operator fatigue and improve productivity with low-effort pull back operation and Insta-Adjust™ ergonomic handle.
|
|
R3 - Compact, Rapid-drying Carpet Cleaner
• Turn congested areas quickly; with
patented ReadySpace technology carpet
is clean, dry, and ready for use in less than
30 minutes
• Clean compact spaces easily with
ultra-low profile, compact design
• Quietly clean with true OSHA recognized
69 dBA sound level
|
|
|
Carpet cleaning machines – for the effective cleaning of large carpet surfaces.Kärcher carpet cleaning machines make the economic, fibre-deep cleaning of large carpeted areas possible. They can be used for conventional spray extraction as well as for a new intermediate cleaning process.
|
|
|
|
|
|
The DULEVO 200 and 5000 Hydro are machines particularly studied for high pressure washing and disinfecting of road surfaces and dealing with the many problems encountered in towns, city centres and large industrial complexes where hygiene is required.
The compact dimensions of these machines, plus a special four wheel steering system make these machines unique in their category, both in working autonomy as in manoeuvrability
Washing is made through a front spray bar positioned under the front part of the cabin, this can be adjusted hydraulically in angle of incidence, side angle, ground height.
The spray bar is built in stainless steel and is equipped with eleven vertical cone type spray units for frontal work and by two side units for working both on the left or right hand side of the machine.
Water is sent to the spray bar through a high water flow volumetric piston pump with pressure that can be regulated by a valve easily accessible and adjustable.
The water is withdrawn and filtered through a cartridge filter (with easy access for maintenance) from a stainless steel water tank placed on the rear part of the machine.
|
|
Washerwoman JUNGOJET is included in the category of the vehicles of maintenance of the narrow roads. She is especially conceived for the cleaning of the pavements, of the pedestrian precincts and gutters.
Width of the vehicle: 1,13m
Height of the vehicle: 1,90m according to the tires
Maximum speed: 25 to 40 km/h according to the countries
- The articulated Vehicle most compact of its category
- Payload 1800 kg according to equipment
- 4 suspended wheels and suspended cabin
- Two-seater, led on the right
- Fast Change of tools
- Exceptional Visibility on the spray bar
- 4 permanent driving wheels
- Robust and ecological
- Adapted to the underground car parks
- Transforms itself into a few minutes out of sweeper, in the vehicle of watering, tilting bucket of transport, the vehicle of snow clearance and suction mower
ADVANTAGES OF THE WASHERWOMAN:
- A new design of the spray bar, simpler and more robust.
- 1000 Liters/pressure up to 200 bar
- Width of passage 1.13 m
|
|
|
|
|
|
Dirty ducts are breeding grounds for mold spores, bacteria, dust, pollen, viruses and other harmful deposits. The AQ-R1500 Duct Cleaner makes duct cleaning a simple, one-person operation. It is ideal for cleaning ducts 4"-18" (100-460mm) I.D. round and 4"-16" (100-410mm) rectangular/square in air conditioning, heating, ventilation and exhaust systems.
The AQ-R1500 uses a cleaning brush mounted to the tip of a flexible shaft. A high air displacement vacuum, connected to the duct, removes deposits as they are loosened.
AQ-R1500-60 Duct Cleaner, HP (0.6 kW), 115 V, 60 Hz, including adjustable speed control, mobile dolly, tool storage box and belt switch.
Specs
. Flexible Shaft Speed: Variable/reversible, up to 1,500 rpm
. Motor Power: HP (0.6 kW)
. Input Power: Standard: 6 amps, 115 V, 60 Hz AC (Optional: 6 amps, 115 V, 50 Hz; 3 amps, 230 V, 60 Hz; or 3 amps, 230 V, 50 Hz)
. Dimensions: 37" (940mm) high x 20" (510mm) wide x 17" (430mm) deep
Weight: 49 lbs (22 kg)
Features
. Simple to operate - minimal training required
. Stainless steel construction - long life
. Speed control - set shaft rotation at optimum speed for each application
. Reversible shaft rotation - optimizes cleaning
. Interchangeable cleaning tools - versatile
. Large wheels - easy to move
. Simultaneous vacuum - removes debris
. Belt switch activation - safe operation
|
|
| ... products without technical information |
| |
LASERBLAST is a Quantel's product range entirely devoted to laser cleaning and surface preparation. In the field of construction, as in the transformation industry, Q-switched solid-state lasers have appeared as a technically efficient and economically realistic solution in comparison with traditional procedures.
The particularity of these products is that they use an optical fiber to transport the light energy. The result is excellent ergonomics and very simple integration into a robot.
|
|
Metallurgy
Aluminium cleaning.
Metal reduction/antioxidizing atmospheres.
Here is an example of ultra fast copper cleaning made with a reducing atmosphere with the ULS device
|
|
The PSX307 plasma cleaner provides 1.5 times the productivity of conventional models. Parallel plate chamber technology delivers superior etch uniformity over conventional batch systems.
Ultra-thin gold-plated electrodes can be wire bonded reliably without nickel compound formation via argon plasma treatment. Gold plating savings alone can provide ROI justification.
Other capabilities include surface modification by oxygen plasma improving mold resin adhesion and under-fill wettability, and reducing incidence of peel-off, voids, and cracks.
Panasonic plasma cleaning equipment sets the standard; thereby, refining tomorrow's technology today.
|
|
| ... products without technical information |
| |
It is a vertical CNC controlled 6 spindle turret type high pressure cleaning machine.
Remained burr and cutting chips can be removed from cross holes, deep tap holes at the operating pressure up to 50MPa.
Features:
- Cutting chips can be removed by maximum 50MPa high pressure water jet emitted from the nozzle positioned by CNC.
- It can deburr by attaching a drill or a brush to the six- spindle turret.
- Cleaning room, the section of machine operation and NC Controller are separated entirely, which ensures waterproofing.
|
|
|
|
|
|
RÖSLER-Waterjet-Machines blast with clean pure water and attain a pressure up to 60000 psi, 4.000 bar. This water is projected onto the component to be treated, via one or more nozzles fixed on a rotating nozzle holder.
The rotation of the nozzle(s) generates a milling or grinding effect on the parts. This is a "soft" method to treat parts from which tenacious, very hard coatings have to be removed.
Blasting with water has many advantages:
No peening effect > no deformations at the part
Absolutely media-free water > insignificant abrasion at the part
Environment-friendly > The process water can be re-used in the closed circuit
No abrasive deposits > no subsequent cleaning of the parts necessary
No abrasive wear
Anticorrosives may be utilised
This procedure is employed for multiple applications in many industrial sectors:
Removal of thermic coatings (e.g. plasma coatings)
Cleaning of welding lines from residual slag
Cleaning of cast parts from sand and ceramic residuals
De-lacquering of a variety of different work pieces
The nozzles are directed by industrial robots or CNC-systems. Thus, a homogeneous blasting result can be achieved.
All relevant machine parameters can be supervised, recorded and adjusted by a central computer.
|
|
|
|
|
|
Since water in the vapor phase in its purest form is present, it is suitable in this state of aggregation in outstanding way for the cleaning. On the oil-moistened metal surface the change of temperature leads to a drastic sinking of the viscosity of the oil. Supported by the mechanical effect of the water vapor subjected under pressure an excellent cleaning efficiency is obtained.
Operational principle:
The profiles are cleaned in a closed cleaning system with water vapor. The MTM Destimat produces made of tap water
2-5 bar water vapor, which is steered by a nozzle directly on the preheated surface of the going through profile. The entire surface is released in such a way from the drawing oil. The oil running off is collected and separated.
Advantages:
- most modern and patented MTM equipment technology
- energy-saving enterprise with only max. 15 KW of capacity
- space-saving solution, the total dimension of the compact
Run plant amounts to 1,900 x 800 x 1,600 mm (LxBxH), inclusive on that
Plant installed switchgear cabinet amounts to the height of 2,300 mm
- simple maintenance
- the plant can without large expenditure on other profile measures reequipped
become
|
|
Salient Features :
• Triplex pump with ceramic plungers, connecting rod system
• Pressure adjustment from zero to max
• Pressure gauge
• High / Low pressure adjustable spray head
• Adjustable spray angle from 0 to 60o
• H.P. soft type hose gun and lance
• Motor thermal protector (VIP 8130)
• Built-in detergent suction pipe (VIP 8130)
Advantages :
• Easy in Operation.
• Low maintenance.
• Compact and Light Weight for easy movement
• Reduction in manpower and Time as compared to conventional cleaning.
|
|
| ... products without technical information |
| |
|
|
|
|
PJ-1400-60
Pulse Jetter Drain Cleaner
Overview
The PJ-1400 Drain Cleaner is ideal for use in sink, shower, laundry tub and floor drains, and processing lines. This powerful unit comes equipped with three nozzles (one blind thrust, one penetrating and one cornering) to remove grease, hair, sand, food, soap buildup and other debris in pipes 1"-4" (38-102mm) I.D. The unit features a 1 HP (1.1 kW) thermal protected motor and a triplex pump to deliver 1,400 PSI of cleaning force at 1.7 GPM (97 BAR of cleaning force at 6.4 LPM). Accessories are available to also use this unit as a pressure washer.
Specs
. Motor Power: 1 HP (1.1 kW)
. Input Power: Standard: 15 amps, 115 V, 60 Hz AC (Optional 7.5 amps,230v,60Hz) or (15 amps 115v,50Hz or 7.5 amps 230v,50Hz)
. Output Water Pressure: 1,400 PSI at 1.7 GPM (97 BAR at 6.4 LPM)
. Pump: Triplex ceramic plunger running in oil bath
. Dimensions: 40" (1,020mm) high x 14" (360mm) wide x 21" (530mm)deep
. Weight: 95 lbs (43 kg) net dry
Features
. Pressure regulator - adjust the PSI (BAR) to fit the application
. Pulse control - allows navigation around tight bends
. Heavy-duty construction - long life
. Compact - ideal for use in tight areas
. GFCI circuit - protects operator
. Polyester reinforced hose - rugged
. Three nozzles - matches application
. Locking casters - prevents rolling
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
