|
|
The new pump innovation from Nilfisk-ALTO has focused on providing superior cleaning power and even higher durability.
With the new POSEIDON 5, you can get your cleaning task done
quicker and prolong the working life of your pressure washer,
reducing your overall cleaning costs.
The new NA5 wobble disc pump unit is innovation from Nilfisk-
ALTO focusing on providing superior cleaning power and even higher durability. Furthermore it is also quiet, making cleaning more comfortable.
POSEIDON 5 clearly still offers SilentPower. |
|
The most innovative hot water line on the market The Nilfisk-ALTO NEPTUNE range spans the compact to the very heavy duty lines and is fit for any imaginable application in automotive, industry or agriculture. Even the most compact units offer the customer the benefit of some of the most
powerful innovations on the market.
SilentPower motor pump units provide long life and low noise level. The EcoPower boiler system not only reduces air pollution but, just as important, offers high efficiency heating performance with up to 18% fuel cost savings.
A wide range of features also protect the machines against malfunctions, a guarantee of long lifetime.
You just cannot do better than NEPTUNE! |
|
EDS - ECO Dosage Solution - is designed to provide a modern and highly efficient means of mixing water and detergents in cleaning applications. In tests performed, Nilfisk-Advance has been able to prove that EDS – ECO Dosage Solution – offers significant cost and time savings, as well as more reliable cleaning results. Since the precise dosage of detergent will always be applied, human error in mixing is completely eliminated.
Furthermore, on scrubber/dryers fitted with EDS – ECO Dosage Solution – the detergent is added to the water at the scrub deck – not in the tank. This means that only clean water is ever in the tank, making it unnecessary for it to be emptied or cleaned. This feature significantly reduces downtime and increases productivity.
On ECO Solution mode, Nilfisk’s scrubber/dryers reduce water consumption by as much as 50%. Nilfisk’s BR 601 model, for example, only uses 1 litre of water for cleaning as much as 56 m². |
|
Industrial series:
a very ample and complete range that understands models to cold and warm water and with tensions both in singlephase that threephase. To use him in every sector for the cleaning with tall pressure and tall temperature with the possibility to mix, to application, a chemical additive. In the standard versions the powers reach 400 cafes with courses up to 60 lts. / min. In the water versions warm the temperature is adjustable up to 150° with possibility to produce vapor. With the specific kit it is possible to use her as hydrosandblasters. Thanks to the use of pomps and tested boilers and components to the state-of-the-art one our high pressure are how much of can offer better the market. Reliability, constructive quality and safety, are at the base of our products. We prepare of numerous used revised guaranteed.
Special series:
to application we are able to plan and to realize special groups with particular preparations. Our technical office is to your disposition.
Semiprofessional series:
numerous models both to warm water and to cold water for demands hobbyand for small interventions. They understand numerous accessories that make her functional for varied demands: kit uncork, kit sanding, rotating brush… |
|
| The Jetvent Duct Cleaner by Triventek is the result of many years experience in the ductcleaning industry. It combines the strength of a powerful industrial engine with a light weight compact design which together with special shaft technology provides a long term solution for safe and comprehensive cleaning of ductwork... |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
'The Mammoth' vacuum collection unit
High Powered Heavy Duty Industrial Vacuum Cleaning & Bulk Collection Solution for industries with the most demanding clean up problems. High vacuum and airflow provide the strength to clean up the most inaccessible areas quickly, with minimum labour and in an economically effect.
Working as the heart of fixed pipe work systems in heavy industries such as Iron & Steel, Cement, Power Generation, Quarries etc the Mammoth provides the power to enable multiple operators to work simultaneously.
On a large site, with long conveying distances, or where cross contamination of products is to be avoided, shorter, dedicated pipe runs can be employed.
Available options
• Power units from 7.5 to 150kw
• Electric, Diesel, LPG engines
• Acoustic enclosure for noise reduction
• ATEX compliant models
• Support frames, access and service platforms
• Skid/ Truck or Trailer mounting
• Wide variety and sizes of hoppers including self-tipping
• Dump, slide, rotary valve hopper discharge options
Clyde Materials Handling engineers can also design custom specific requirements.
For further details please see: www.clydematerials.com
|
|
The stainless steel constructed tunnel conveyor washer incorporates one or more stages (washing, rinsing, drying,...). It works within an enclosed environment and degrease parts by spraying hot detergent solution (from 1 to 5% of detergent). The conveyor conveys the parts to be cleaned.
Applications:
Continuous washing
Washing of parts prior to assembly
Degreasing of parts between process
Washing according to cleanliness standards.
Characteristics
Modular construction
Stainless steel construction
Easy maintenance with easy access to chambers and tanks |
|
Safely and Quickly Removes Tough Materials
Flow International Corporation's A-3000 ultra light hand tool combines the power of ultrahigh-pressure (UHP) water (and its relatively low water volumes) with extremely high nozzle rotation speeds. The result is a versatile tool that offers excellent removal rates for a wide variety of industrial cleaning projects.
This multi-purpose tool offers superior performance and control. Rotating a variety of multiple-orifice tips at up to 3,000 rpm, the A-3000 delivers as much as 6.5 gallons (22.7 liters) per minute of ultrahigh-pressure water. It is the only hand tool rated for operating pressures of 45,000 psi (3,100 bar).
Multiple Applications Multiply the Savings
The A-3000's high rotation speed makes it the ideal tool to remove the toughest coatings, including epoxies, resins, paint, rust, scale, calcium deposits and oxides. And because it is air-powered, the A-3000 is easily operated from any compressed air supply.
With its unmatched productivity and low water volumes, the A-3000 is an environmentally-sensible alternative to grit blasting, burning and chemical removal. The A-3000's light weight reduces operator fatigue so workers can work longer, and more safely.
Benefits
Reduced operator fatigue improves safety and productivity
Pneumatic power means no oil spills
High removal rates with minimal waste water
Standard Features
Remotely located on/off valve
Advanced ergonomic design
Lightweight
Patented swivel design allows quick change of high-pressure seals and easy maintenance
Second safety trigger requires operator to have both hands on tool for safe operation
Runs from any compressed air source with greater than 32 scfm at 90 psi
Flow patented HornetTM nozzles
Specifications
Tool weight: 11.0 lbs (4.98 kg)
Maximum operating pressure: 45,000 psi (3,100 bar)
Air required: 32 scfm @ 90 psi
Working rotation speed: 3,000 rpm
Motor horsepower: 0.7 hp (0.5 kW)
|
|
High Pressure Spray Gun/Lances
Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 - 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
|
|
We are manufacturers of high pressure guns and wholesaler for Widoberg products.
Therefore if you wish to have a new automatic - or mecanic installation we offer you the most appropriate solution for your requirements.
We have highly qualified staff with a large experience in designing and adjusting installations. |
|
| ... products without technical information |
| |
Safely and Quickly Removes Tough Materials
Flow International Corporation's A-3000 ultra light hand tool combines the power of ultrahigh-pressure (UHP) water (and its relatively low water volumes) with extremely high nozzle rotation speeds. The result is a versatile tool that offers excellent removal rates for a wide variety of industrial cleaning projects.
This multi-purpose tool offers superior performance and control. Rotating a variety of multiple-orifice tips at up to 3,000 rpm, the A-3000 delivers as much as 6.5 gallons (22.7 liters) per minute of ultrahigh-pressure water. It is the only hand tool rated for operating pressures of 45,000 psi (3,100 bar).
Multiple Applications Multiply the Savings
The A-3000's high rotation speed makes it the ideal tool to remove the toughest coatings, including epoxies, resins, paint, rust, scale, calcium deposits and oxides. And because it is air-powered, the A-3000 is easily operated from any compressed air supply.
With its unmatched productivity and low water volumes, the A-3000 is an environmentally-sensible alternative to grit blasting, burning and chemical removal. The A-3000's light weight reduces operator fatigue so workers can work longer, and more safely.
Benefits
Reduced operator fatigue improves safety and productivity
Pneumatic power means no oil spills
High removal rates with minimal waste water
Standard Features
Remotely located on/off valve
Advanced ergonomic design
Lightweight
Patented swivel design allows quick change of high-pressure seals and easy maintenance
Second safety trigger requires operator to have both hands on tool for safe operation
Runs from any compressed air source with greater than 32 scfm at 90 psi
Flow patented HornetTM nozzles
Specifications
Tool weight: 11.0 lbs (4.98 kg)
Maximum operating pressure: 45,000 psi (3,100 bar)
Air required: 32 scfm @ 90 psi
Working rotation speed: 3,000 rpm
Motor horsepower: 0.7 hp (0.5 kW)
|
|
High Pressure Spray Gun/Lances
Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 - 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
|
|
We are manufacturers of high pressure guns and wholesaler for Widoberg products.
Therefore if you wish to have a new automatic - or mecanic installation we offer you the most appropriate solution for your requirements.
We have highly qualified staff with a large experience in designing and adjusting installations. |
|
| ... products without technical information |
| |
The Hypro Series 5200 Big Twin® piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals.
The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft. |
|
| Self-serve carwash and tunnel prep unit owners across the country are making the switch to Hypro’s 2300 Series plunger pumps. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
> Main features
* Automatic loading system of the corner. * Automatic balancing system of the corner. * Cutting units shaft with double support * Four cutting units * Automatic working cycle driven by PLC* Automatic working cycle with automatic start. * Automatic working cycle with manual start, to work a frame with a extremely reduced “light – hole” * 1 Upper knife 3 x 0,5 mm to clean the upper weld bead. * 1 Lower knife 3 x 0,5 mm to clea the lower weld bead. * Profile support arms * Up and lower drilling unit for cleaning the gasket passage (ONLY FR4P) |
|
|
|
