|
|
Special horizontal decanter centrifuge for continuous separation of solids with different densities from liquids. Flottweg range of SORTICANTER® sizes reach up to capacities of 1,000 kg/h solids, depending on the properties of the raw material.
Typical application:
plastic recycling
|
|
With models capable of discharging over 3500 lbs/hr of dewatered solids on a continuous basis, the NOXON decanter is the centrifuge of choice for heavy solids applications.
Many of the NOXON models are available in both concurrent and countercurrent configurations for the widest range of applications.
|
|
Notes:
1. Element diameter is 63.5 mm with cover.
2. Pressure drop calculations based on 20 micron elements.
3. Element length is for mesh pack and does not include end fitting.
4. Polymer viscosity is 250 Pas (2500 Poise).
5. Design conditions are 241.5 Bar (3500 psi) and 343.5C (650F).
6. Vessel material is 304SS and system is designed per ASME Code.
7. System configuration is MPST's patented close-coupled design.
8. System includes manual vent valves and hydraulically automated diverter valves with control panel.
9. System prices are Ex Works Maag Factory.
Options Available:
A. Actuated Vent Valves
B. Drain Valves (manual and actuated)
C. Plunger and spool valves available upon request
|
|
Plenty's ability and extensive experience in designing and building fabricated Duplex assemblies enhance the range of cast Duplex Strainers.
These have been used on gas services, high-pressure applications or for sizes and flow-rates beyond the capacity of the cast Duplex ranges.
** Where changeover without interruption of the flow is important, Plenty Process Filtration can design and manufacture Fabricated Duplex Assemblies to meet your specific requirements.
Units can be skid mounted or free-standing.
Manual or electrically operated changeover can be provided dependant upon the application.
Materials include Carbon Steel, Stainless Steel and Special Alloys.
|
|
|
|
|
|
Star Filters' unique blend of assembly line and custom fabrication allows us to design and build the Star Filter Press exactly suited to the customer's specific needs, at a cost much lower than one would expect to pay for custom fabrication. Star Filter Presses can be fabricated in a variety of metals including carbon steel, monel, aluminum, and other special alloys upon request.
Star Compact Polishing Filter
• Portable, four-wheel, locking-caster design
• Six 47cm precision-machined and internally ported plates for optimum sealing
• 1-1/2” tri-clamp connections
• Large usable filtration area: 405 more per plate than a 40cm design
• 304 stainless steel construction with polypropylene plates
• Small footprint: 24” long x 21” wide x 30” high
• 0.5 µm pads furnished standard
• Expandable to 25-plate design
Star DE Filter
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Full 1.7 ft3 of sludge capacity
• 20-1/2 ft2 of filtration area
• Expandable to a 20-plate design
Star Combination Filter
• Integral crossover plate facilitates two-stage filtration
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Mix and match plates for specific product needs
|
|
|
The BHS-Pressure Plate Filter is a pressure filter that operates on an intermittent basis and is used primarily for separating solids/ liquids in average to poor filtering suspensions with relatively low solids content, for adsorptive filtration processes (adsorption through filter cake) as well as for clarifying filtration.
|
|
The BHS-Autopress can be used for separating moderate to poor fil-tering suspensions efficiently. Media that need to be treated in closed machines for reasons of sterility, toxicity and workplace hygiene are se-parated safely and reliably.
If required, you may also treat the cake by washing, extraction, pressing blow-out and drying. Low cake thick-ness, complete filtration without heel volume and an ex-ceptionally low level of residual moisture in the pre-dried cake ensure extremely high throughput rates.
The highly efficient cake washing process occurring in the BHS-Auto-press produces an absolutely pure product without inter-mixing. The encapsulated version (for pharmaceutical products and in GMP design) can also be used for filtering toxic or volatile media.
The BHS Autopress is made up of the following principal compo-nents:
# horizontal stack of filter plates
# movable filtration housing
# scraper
|
|
The BHS-Rotary Pressure Filter is a continuously operating filter of pressure-tight design. This makes it ideal for processing volatile and hazardous products as well as for sterile processes.
Extensive subsequent treatment processes are possible, such as cake washing in one to five stages with or against the direction of flow, solids/liquid extraction, steaming, blow-out, intermediate suction, subsequent hot drying and many others. The BHS-Rotary Pressure Filter works on the principle of cake filtration and is designed for the following operating parameters:
# Pressure differences up to 6 bar
# Cake thickness up to 185 mm
# Operating temperatures up to 160°C
# Filtration capacity range 200 to 50 000 l/m²h
# Solids content from 0,5 % by weight
# Main grain size distribution 5 to 200 µm
|
|
Horizontal decanter centrifuge for continuous separation of 3-phase systems consisting of two immiscible liquids and solids. Flottweg provides a broad range of TRICANTER® sizes, from pilot scale or small production up to industrial scale with capacities of 80 m³/h.
Typical applications:
oil sludges, recovery of animal /vegetable oils and fats, wheat starch/gluten separation, etc.
|
|
Our bath maintenance systems combine sludge separation by centrifugal separators with foreign oil separation by DPS systems. Variable possibilities of fluid guidance allow the flexible use of these mobile systems.
According to intended use, you can choose between our separators S-15 and NZ-50 in combination with the different sizes of the DPS series. Different materials and control versions make possible the optimum integration into your system
|
|
- Specifically designed for recovery and recycling.
- Prevent costly damage by filtering contaminants out of the refrigerant before it enters the unit.
- UL Listed and CSA Certified.
- Maximizes removal of solid contaminants to include aluminum and iron particles, copper and iron oxides, metal chips, varnish, burrs, flux and dirt.
- Female connection on the PF-052MF has been extended to eliminate difficulties with valve handles and hose connections.
- Contact Parker for other available fittings.
|
|
With patented single-hand operation and zero leakage switching of media flow, MAHLE duplex filters offer excellent economy. In the low and medium pressure range or as return-line filters, in continuous operation, ready for duty twentyfour hours a day, maintenance work can be carried out during operation thus ensuring their contamination retention ability is fully utilized.
|
|
Eco-Duplex-System
- Eco-System with 2 valves to run single or parallel
- Continuous Filtration while replacing the Bag
- Double Volume depending on Inlet/Oulet-configuration
- Compact Design
- Adjustable mounting legs
- Pressure Difference can be integrated to run system automatically
Specifications
- Max. Flow-rate: 80 m³/h (running parallel)
- Filter area: 1
- Volume housing: 58 Liter
- Weight housing: ca. 63 Kg
- Installation height: ca. 180 cm
|
|
The switchable F605 duplex filter consists of two F105 series filter bodies which can also be fitted with easy to use closures.
Benefits:
- Continuous filtration during the cleaning
- No interruption of the flow during the changeover
- Fast replacement of the screen insert
|
|
With patented single-hand operation and zero leakage switching of media flow, MAHLE duplex filters offer excellent economy. In the low and medium pressure range or as return-line filters, in continuous operation, ready for duty twentyfour hours a day, maintenance work can be carried out during operation thus ensuring their contamination retention ability is fully utilized.
|
|
|
|
|
|
IMPURITY COLLECTIONG FILTER
TYPE FFL
"Y" filter in stainless steel AISI 316L (1.4404), impurity collector in fluids of the tubes to protect control and interception valves.
Sizes
- From DN15 to DN300
Body
- Wax process microcasting - size DN15 to DN100;
- Forged and electrojoined plate - size DN125 to DN300.
Rating
- PN16 (DN15 - DN100);
- PN10 (DN125 - DN300).
Filtering element
- Net and wire cloth in stainless steel AISI 316 with different degree of filtration.
Connections
- Flanges PN6, PN10, PN16, ANSI150;
- Stub to be welded on the tube.
Seal gasket
- Carbofiber;
- PTFE.
Working temperature
- Max 200°C.
TYPE FFL/FF
"Y" filter in stainless steel AISI 316L (1.4404), impurity collector in fluids of the tubes to protect control and interception valves.
Sizes
- From DN8 to DN50
Body
- Wax process microcasting.
Rating
- PN25.
Filtering element
- Net and wire cloth in stainless steel AISI 316 with different degree of filtration.
Connections
- Threaded gas ISO 228.
Seal gasket
- Carbofiber;
- PTFE.
Working temperature
- Max 200°C.
|
|
The Apollo® YB Strainers are designed to protect piping systems and process equipment from unwanted foreign particles with minimum pressure loss.
FEATURES
• 100% American Made
• 100% Factory Pressure Tested
• Self-Aligning Screen Design
• Blowout Ball Valve Option
|
|
ARI-Strainer
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, heating technology, district heating, thermal oil applications, general plant manufacturing, etc.
Medium: Steam, gases, liquids, etc.
Application (Stainless Steel): Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium (Stainless Steel): Steam, gases, liquids, etc.
eClass-No.: 37011401
|
|
Used to trap foreign matter from entering a steam, water, oil or gas pipeline
MATERIALS & CONSTRUCTION
• Dezincification resistant cast bronze body and cap
• Threaded or solder ends
• Tapped cap with blow-off plug (standard)
• Solid cap available (MTO)
• Machined seats in body and cap to ensure proper screen alignment
• 20 mesh stainless steel screen (standard)
• Perforated stainless steel screen available
|
|
TYPE Y TYPE, BUCKET TYPE, DUPLEX TYPE
SIZE RANGE 1/2” TO 24”
BONNET TYPE BOLTED
MATERIAL A105, F11, F22, F5, F9, F304, F304L, F316, F316L, WCB, WC6, WC9,
C5, C12, CF8, CF3, CF8M, CF3M, CF8C, CF10, DUPLEX, INCONEL, MONEL,
HASTELLOY…etc
PRESSURE RANGE CL 150 TO 4500
ENDS SCREW, SOCKET WELD, BUTT WELD
FLANGE: ANSI, JIS, DIN
OPERATOR NA
|
|
Y Strainers
Used to remove solid particles of liquid, steam or gas fluids in industrial pipes.
The Y strainer meets the requirements of most industrial segments.
The Y strainer has low resistance to fluid passage (straight passage), resulting in low pressure loss.
They are available in different screen openings.
Used to remove particles also in applications of adhesive products. Available for different loads, with stainless steel screens to remove particles.
|
|
| ... products without technical information |
| |
|
|
