Interface modules

... CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN ...

... CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN ...

... single-channel high-rate compact-size CANFD (flexible data rate) isolated transceiver modules with an upgraded version of CAN. The main feature of the isolated CAN transceiver is to further enhance its ...

... available. The SIWAREX IS Ex interface can be used for all SIWAREX weighing modules. It contains 6 safety barriers and has the designation to ATEX II(2)G[EEx ib] II Benefits Versatile capabilities, ...

A wide range of interface modules is available for connecting WCS read heads to standard interfaces. All available interface modules are compatible with ...

... -Link is compatible with a wide ranges of cameras from top end digital cinematography cameras, broadcast system cameras and camcorders, professional cameras and camcorders and top end ...

VTK-CAN-04-RAG module is a two-port high-speed CAN bus interface for USB. With mini-PCIe form factor design, it is easy and quick installation on any device to communicate with the vehicle ...

The product for the fusion of NTP and MOBALine technology is the Network MOBALine Interface. Its interfacing characteristics help to combine NTP and MOBALine installation and to benefit from the advantages of both technologies.

Bus module MGB-B...-PN... with 3 controls and indicators, push-pull plug • 1 cover for indicators • 1 operating mode selector • 1 illuminated pushbutton • including adhesive labels • Push-pull plug • Pre-assembled ...

... including terminal plug for stack light (M12, 5-pin) • including terminal plug for enabling switch (RC12, 12-pin) • Pre-assembled on mounting plates 7/8" plugs according to ANSI/B93.55M-1981 and ...

... integrated switch (supports MRP). MLI connections (module plug connector) An MGB2 Modular or an MCM Modular can be connected directly to a bus module (direct plug). Alternatively, the modules ...

PLC Interface: EtherNet/IP™ Module •Ethernet IP Module •Simple interface between Orbit® and PLC using Ethernet/IP •ODVA conformance tested •Cyclic and Explicit Data Connecting ...

Orbit® Interface Modules/PLC Gateways •USB •Ethernet •RS232 •Wireless (Bluetooth™) •Modbus RTU Whether it be PC, laptop or PLC, Solartron offers a range of Interface Modules ...

PLC Interface: ProfiNet® Module •Simple interface to any ProfiNet® enabled PLC •Conformance Tested Connecting ProfiNet® PLC to LVDT type sensors is now easy. The ProfiNet® version ...

... noise on the lower ranges EXTERNAL TRIGGER Synchronize your U-LINK to your pulsed laser or digital chopper SERIAL COMMANDS Serial commands are available on both versions to let you take full control REAL-TIME ...

... pyroelectrics MEASURE FJ ENERGY LEVELS Thanks to a unique digital method for suppressing the noise on the lower ranges SERIAL COMMANDS Serial commands are available on both versions to let you ...

... one calibration. Reduce your recalibration costs by half! UNIVERSAL SOFTWARE & SERIAL COMMANDS Control your INTEGRA detector with our user-friendly software or use serial commands to operate it with ...

USB 2.0 high-speed interface with data rates of 480 Mbit/s • CAN FD interface with electrical isolation, ISO 11898-2 compliant • CAN FD bit rate up to 8 Mbit/s • Powered via USB • ...

CANopen module with 2 serial interfaces • Configuration of physical serial interfaces via piggybacks • 2x RS-232 or optional 1x RS-232 and ...

... TCP/IP * MBU USB MCT Interface connection units Interface module allowing the connection of remote expansions via the proprietary MSC bus * MCT1 - 1 connection interface ...

These modules allow the connection of the Micron measurement light curtains with the following industrial field bus: *Profibus DP *DeviceNET *CANopen *EtherCAT *Ethernet IP *PROFINET *ModBus RTU *ModBus TCP/IP *USB ...

The new MG70 multi channel interface from Magnescale provides high speed data communication via EtherNet/IP und PROFINET and enables the connection up to 85 counter modules. The connection with the digital ...

... to secure electrical isolation between logic and load. •Connection with spring-clamp terminal •Additional terminals for jumper •Test contacts for each terminal •Safe separation •with manual control level

Coupling devices are used to electrical isolation between logic and load. •Connection with screw-type terminals •closed compact series •integrated protective circuit •with manual control level and automatic checkback

Interface Module 8 lines, ideal for transformation or permutation by cable connection terminal RJ11. Supplied in board for mounting on DIN-rail.

... mode spikes or surges. The DSCA42 2-wire transmitter interface module output is either voltage or current. A dedicated loop supply is provided at terminal 3 (+OUT) with loop return located ...

> Power supply 12 - 30V / 0.1A > Temperatures 0 - 50 ° > DIN bar assembly > LED activation of outputs > Inductive loads protection > Short-circuit protection > Temperature protection > Option of flat cable inputs DIMENSIONS > ...

> Power supply 12 - 30V / 0.1A > Temperatures 0 - 50 ° > DIN bar assembly > 4kV insulation DIMENSIONS > Frontal H: 125 mm / L: 82 mm > Depth D: 55 mm RESOURCES > PNP / NPN 12 / 24V ~ - 0.6W > 10A isolated exchange contact outputs

2-Channel, 16-bit, Synchro/Resolver Interface Features 2 input / output channels 16-bit resolution 3-wire (Synchro) and 4-wire (Resolver) inputs Reference output per channel 2 to 28 Vrms ...

... released the USB22 Series of USB 2.0 to ARCNET adapters. ARCNET’s determinism has been compromised with traditional PCMCIA interface products because typical operating systems cannot service these devices in a timely ...

... arbitration. Each PCX20 module has two LEDs on the board for monitoring network operation and bus access to the module. It also has an external DIP switch so that node addresses can be easily reassigned ...

... flexibility with regard to the number of measuring points, and handling without a great deal of training. With the Smart Grid Interface Module Comfort, EFEN has developed a modular system for the collection ...

... steadily increasing number of electric vehicles drawing power for recharging on the other hand. With our Smart Grid Interface Module (SGIM) Light, we at EFEN offer you a space-saving option for simple ...

... ControlNet™ products for your applications. Products have either a built-in ControlNet interface, or connect to the ControlNet network via an optional communication interface module. ...

WAGO's interface modules offer safe and maintenance-free connections for flexible signal wiring applications. They connect electronics to electrical systems at the control level and perform signal transmission ...

... solutions Water distribution Wastewater treatment Wastewater transport Communication Interface Module/Communication Interface module is the range of ...

The WirelessHART Adapter SWA70 is an interface module for the wireless transmission of 4 to 20 mA/HART signals from connected field devices to a WirelessHART Fieldgate. It is powered by either a battery ...

... movements with TwinCAT 2 NC I. Further system interfaces or fieldbus connections can be added to the basic CPU module. The CPU module requires a CX1100 type power ...

PACSafe Interface Modules provide isolated safety output contacts for light curtains and other primary safety devices with External Device Monitoring (EDM). Featuring 6 amp hard contact outputs, these ...