|
|
The Embedded Wireless Industrial Serial Server SW1001T is an embedded solution between TCP/IP via wireless and RS-232/RS485/RS-422 communications. SW1001T can be built into your casing for specific applications, ex. mobile serial device at hardly cabling area, it allows almost any serial device to be connected to a new or existing professional wireless network. SW1001T offers wireless network interface (IEEE802.11g, 54Mbps) and one serial port.
By encapsulating serial data and transporting it over Wireless LAN; or for security requirements by WEP/WPA-PSK/WPA2-PSK encryption. SW1001T offers full-duplex, bi-directional data transmission transparent between serial port and Wireless LAN.
In industrial and manufacturing automation fields, SW1001T is used for field devices to connect Wireless LAN through TCP/IP protocol directly. It is also specially designed for conjunction with Manufacturers of plcs, HMIs, Barcode scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light systems.
Terminal Server (Main Control Program Executed in this unit) makes most use of Wireless LAN (or Ethernet) connectivity to drive serial devices. It transforms whatever serial data received to TCP/UDP format then enables a host computer to drive the serial devices through the Wireless LAN and Ethernet.
Flexible configuration options enable this unit to be setup over TCP/IP by Telnet, Web browser, or other utility. SW1001T is ideal embedded solution for almost any industrial and manufacturing automation with advanced wireless connectivity. |
|
Advantech introduces the EKI-1521/1522 Serial Centre servers, which allow RS-232/422/485 serial devices to be remotely monitored, managed and controlled over Ethernet and Internet Protocol (IP) networks. Equipped with dual 10/100Base-TX Ethernet ports and dual Media Access Controllers (MACs), these innovative devices ensure data transmission even in the event of a network link failure.
With redundant Ethernet connections, communication is not interrupted in the event of a network problem. With one connection automatically assigned as primary and the other as backup, loss of the primary connection initiates an immediate and automatic switch-over to the backup, ensuring data integrity and peace-of-mind.
The EKI-1521 and EKI-1522 offer a number of conventional operating modes that allow connections to be initiated by either attached serial devices or remote Ethernet hosts using both UDP/IP and TCP/IP protocols. For applications beyond simple point-to-point connections, two new multi-access modes allow one-to-many and many-to-one communications. The first allows up to five Ethernet hosts to access a single serial device and the second allows a single serial device to simultaneously send data to as many as 16 Ethernet-connected hosts.
In addition to these exciting new features, serial transmission speeds have been increased to 921Kbps, allowing a much broader range of serial devices to be network enabled. More importantly, optimizations in serial to Ethernet handling have yielded an ultra fast round-trip latency of less than 10 milliseconds where network traffic is not an issue, allowing the use of timing-sensitive serial protocols and increased polling rates. |
|
DeviceMaster RTS family of device server enables browser-based remote port/device monitoring and configuration and provides an application professional software platform for local processing. The DeviceMaster RTS product is a network-attached solid-state, embedded device server that delivers exceptional price/performance and reliability.
Anywhere you have RS-232/422/485 serial devices, you can network-enable them with the DeviceMaster RTS device server to simplify maintenance, reduce your cost of ownership, and translate the savings and efficiencies to your bottom line!
The DeviceMaster RTS device server is Comtrol’s solution for serial device networking and running applications that can benefit from “real-time” performance. Using Comtrol’s developer kit, the DeviceMaster RTS device server can even be programmed to perform a wide variety of local processing tasks, including:
Data protocol conversion
Data routing
Data validation
Data tagging
Data logging
And much more
Device networking and application software processing takes a giant step forward with the release of Comtrol’s new solid-state DeviceMaster Real-Time Server (RTS) device server. For the first time ever, system designers and integrators can select from the industry’s most extensive line of programmable device servers designed to network-enable serial devices. It is now possible to host and run applications, as well as enable remote maintenance and support |
|
Jetport 5601 is world's first one port RS232/422/485 to Redundant Ethernet server. The serial interface is configured in software and supports speed as high as 460.8kbps. The Redundant Dual Ethernet ports can auto-recover in less than 200ms if the master link breaks to guarantee non-stop connection.
JetPort 5601 can be configured by JetPort Commander, an easy-to-use utility for Windows that covers all management, monitoring, and control functions for one or many JetPort professional servers. In addition to Windows configuration, JetPort can be configured by Web and Telnet, giving administrators the flexibility for device management. JetPort 5601 supports HTTPS and SSH for secured management data. JetPort 5601 can be wall mounted or din-rail mounted by the din-rail kit.
|
|
The Industrial Serial Server SE5002 is a dual port professional gateway between Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, SE5002 offers full-duplex, bi-directional data transmission transparent between serial port and Ethernet network.
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Professional console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~30VDC wide power input range, SE5002 is ideal for almost any industrial and manufacturing automation.
ATOP Virtual COM professional software provides existing Windows based application to access serial device by mapping to remote serial server via Ethernet.
In industrial and manufacturing automation fields, SE5002 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with Manufacturer of plcs, HMIs, Handheld scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
¡ Rugged metal case with DIN-Rail/wall-mount
¡ 15KV ESD protection for serial signals
¡ 10/100Mbps Fast Ethernet full duplex auto negotiation
¡ Support multiple link mode with TCP server/client, UDP and Virtual COM mode
¡ Monitor, manage and control industrial field devices remotely
¡ Configuration: Built-in Web Server/Serial Console/Telnet
¡ Windows Base utility for IP configuration
¡ Upgrade firmware from remote-PC via Ethernet |
|
| ... products without technical information |
| |
|
|
see the results for the following category
