|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us
|
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
It’s now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US
|
|
With UNIQLE, SCHÄFER is systematically implementing the principle of a cooling system integrated in the server rack. The decision for integration is a logical step.
Server space is not unlimited! And through the trend to higher and higher computer performance accompanied by a greater packaging density, server racks must assure a maximum of space efficiency. This enables
a maximum computer density per m2 floor space to be achieved.
|
|
- The most up-to-date cabinet solutions for all standard server and network components even for combinations of components from
different manufacturers
- Maximum assembly range: 900 mm deep, 600 mm wide
- Maximum security: side panels attachable/detachable with lock,
doors with pivoted handle and lock
- Optimum ventilation (active or passive)
- Simple to assemble and disassemble − all cabinets can be dismantled
- Mobile or stationary application possible
- In light grey RAL 7035 or black RAL 9005, inc. accessories in black
- Extremely strong frame with load bearing capacity of up to 1000 kg
|
|
SP54 Rack
- High-grade steel cabinet (light grey RAL 7035, black RAL 9005). Profi le technology guarantees maximum stability
- Fully assembled with basic accessories
- Flexible interior − designed to accommodate all currently available IT components
- Simple to assemble and disassemble − all cabinets can be dismantled
- Accessible from all sides (removable doors and panels)
- Can be used as stationary or mobile units
- 100% modular system, can be extended at any time
- Extremely strong frame with load bearing capacity of up to 1000 kg
- Protection rating: IP54, all-round sealing
|
|
|
|
|
|
Application
Designed deeper to house servers and manage power cables, PROLINE® FLOTEK™ Cabinets rely on optimized passive airflow for thermal management. The cabinets may be placed in data rooms randomly or in hot/cold aisle configurations.
Features
• Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability
• Fully perforated front and rear doors and fully perforated top allow maximum air movement around equipment; conforms to server manufacturer open space requirements
• Models without sides fit together quickly for easy installation in ganged applications
• Three-point locking pushbutton swing handle on front door provides easy but controlled access; two keys included
• Rear doors are split for easy access and include 3-point, low-profile, locking swing handle
• Two sets of 19-in. square-hole rack angles support both front and rear of equipment
• Rack angles are infinitely adjustable from front to rear for positioning flexibility
• Large gland plate in top allows easy routing of cable, pre-terminated cables and patch panels
• Mounting hardware (20 each of 10-32 screws and cage nuts) is included
Specifications
• 16 or 14 gauge steel doors, sides and cover
• Welded 12 gauge steel frame
• Rack angles have square holes with EIA 310-D spacing
• Open bottom with integral bolt-down brackets
Finish
Phosphatized steel coated with RAL 9005 black textured, low-gloss polyester powder paint. Other finishes available—contact Hoffman Customer Service.
Patents
|
|
Project and Effi ciency Range with low-cost
Complete Cabinets for networks
- Models for maximum market coverage with
43 U in heights of 2000, depths of 800 and
widths of 800 mm
- Extremely strong framework with a load
bearing capacity of up to 700 kg
- Frame can be "halved"
- High quality powder coating fi nish in light
grey RAL 7035 on all panelling components
- All panelling, such as side panels and doors,
can be removed in seconds
- Top and bottom modules prepared for brush
strips and/or ventilators
- Doors fi tted with T-handles and locks. Can be
exchanged for pivoted handles
- Plinths are always passively ventilated,
100 mm high
- Standard depth-adjustable 19" mounting
angles
- Extremely high savings on each baying solution
Material:
- Framework, vertical: 1mm steel sheet, multiply
profi led;
- Horizontal: 2 mm rectangular tube.
- Panelling: 1 mm steel sheet
|
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee
|
|
|
Two frames with different stability but identical outer appearance. Two colour combinations for immediate selection on ServicePLUS. Large variety of versions and dimensions (up to 1200 mm depth). Unique profile with many assembly possibilities and new ways for cable management.
|
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
- dismountable aluminium cabinet frame
- passively ventilated viewing doors (side
perforations) with turning lever lock
- rear door with fitted perforated panel
(48% perforation) with turning lever lock
- two asymmetrically split side walls with
sash fastener locking mechanism
- two 19" levels depth adjustable assembly
options for the integrated
19" parts (see top view cabinet frame
page 2.3 "Technical information")
- 3-part bottom plate- closed
- closed top plate
- base with tilt prevention D=1150 mm
- earthing set 2.5 mm2, mounted
- 19" screw set M5, 50 pcs
Delivery:
fully assembled, base included
(with H=2000 mm)
|
|
| ... products without technical information |
| |
|
Under the brand Multimedia Connect, CAE GROUPE develops a complete range of products dedicated to High speed networks LAN Cat5e / Cat6 / Fiber opic structured cabling system.
|
|
outdoor racks and enclosures
applications
- Mobile telephony: energy racks.
- LAN, WAN networks.
- Metering stations.
- Electronics.
range
- Metal or polyester «indoor» racks and enclosures.
- Metal (simple or double skin) or polyester «outdoor» racks and enclosures.
- EMC protection.
- Anti-vandalism protection.
- Anti-seismic protection.
- IP 42, IP 55.
- Cooling by convection or by cooling unit.
- Adapted to accept 19" components.
- Individual product configuration.
|
|
|
|
|
|
Model NAR-5630
1U communication appliance rack-mount server with up to 10 GbE and 2 bypass segments
Cost effective dual core system platform with high performance GbE ports
Up to ten GbE ports available
Up to two Gen.2.0 bypass segments available
Supports FSB up to 1066/800 MHz
Supports dual channel DDR2 667/533 up to 4GB
Dual-personality for flexible use of fiber-optical(SFP) and copper (RJ45) interface
Highly integrated system in compact chassis but still supports dual 3.5" HDD installation and/or one removable HDD (optional via project base)
Model NAR-5612
1U communication appliance rack-mount server with 2 PCI-E I/O modules and PCI-X expansion slot
Removable PCI-E Ethernet modules for flexible application request and easy maintenance
Supports Intel® Celeron® D, Pentium® 4, Pentium® D and CoreTM 2 Dual CPUs
Supports FSB 1066/800/533 MHz
Support dual channel DDR2 667/533 up to 4GB
Up to ten Gigabit Ethernet ports
Supports up to 3 bypass segments
Dual-personality for flexible use of fiber-optical (SFP) or copper (RJ45) interface
One rear-accessible PCI-X expansion slot
|
|
| ... products without technical information |
| |
|
|
